Kaiyuan Wang

Mr. Kaiyuan Wang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KWKaiyuan Wang
Kaiyuan Wang
JZJunming Zeng
Junming Zeng
Yun YangYun Yang
Yun Yang
SHShu Yuen Ron Hui
Shu Yuen Ron Hui
This paper presents a double-layer pulse-width pulse-frequency based optimal control (PWPFC) in achieving maximum energy efficiency tracking (MEET) and quasi-load-independent (QLI) constant current (CC) and constant voltage (CV) outputs for domino wireless power transfer (WPT) systems with full considerations of equivalent series resistances (ESRs). The proposed hierarchical control, which can be implemented using inexpensive digital controllers, is applied to the primary-side inverters based on the measured output current, output voltage, and phase angle of the receiver current via infrared (IR) communication. The upper layer (i.e., Stage-I) of the PWPFC is a reference selection algorithm to provide references of operating frequencies and duty ratios for the tracking algorithm of the lower layer (i.e., Stage-II). To ensure accurate tracking, a hill-climbing method is adopted to regulate the operating frequency of practical domino WPT systems with parasitic components and disturbance. Experimental results have verified the effectiveness of the proposed PWPFC in regulating domino WPT systems with MEET and QLI CC and CV outputs under various loads, compensation networks, and initial frequency conditions.

21 July 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
YMYuan Mao
Yuan Mao
Yun YangYun Yang
Yun Yang
KWKaiyuan Wang
Kaiyuan Wang
This paper presents a generalized primary-side control strategy in achieving constant current (CC) and constant voltage (CV) for wireless battery chargers (WBCs) with series-compensated receivers, while extra battery management circuits are not required. The proposed control is applicable to wireless power transfer (WPT) systems with any compensation networks (X) at the primary side. Unlike conventional CC and CV charging of battery loads in single-stage series-series (SS)-compensated WBCs using frequency modulations, the proposed scheme allows constant frequency operations for XS-compensated WBCs without communication feedback. The proposed control strategy is established based on a novel communication-free front-end monitoring scheme for static mutual inductances using two non-resonant frequencies. Both simulation and practical results of a popular XS-compensated (i.e., LCC-S) WPT systems, are presented to validate the effectiveness of the new transmitter-side CC and CV charging strategy for XS-compensated WBCs with minimal receiver-side designs. The accuracies of the intermediate static mutual inductance identification scheme are also verified.

3 March 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YWYao Wang
Yao Wang
JYJunxiang Yang
Junxiang Yang
KWKaiyuan Wang
Kaiyuan Wang
Yun YangYun Yang
Yun Yang
This paper presents a highly integrated and compact hybrid wireless power transfer (WPT) system with asymmetrical printed-circuit-board (PCB) based self-resonators. The PCB-based self-resonant coupler consists of four PCB-coil plates with two different sizes, which can work as the transmitter/receiver for IPT as well as the capacitive plates for CPT. With a typical stacked four-plate configuration, both inductive and capacitive mutual couplings are achieved between transmitter and receiver, contributing to a highly compact and integrated self-resonant hybrid WPT system without any external compensation components. Detailed theoretical analysis and system modeling are provided based on the two-port parameter theory and a 300W hybrid WPT prototype is implemented with an asymmetrical coupler consisting of 210-mm and 140-mm PCB-coil plates. The implemented hybrid WPT system is tested at 80mm, 60mm, 37mm, and 12mm with self-resonant working frequencies of 3.845MHz, 3.75MHz, 3.57MHz, and 3.19MHz, respectively, and the system performance in terms of output current property, power transfer capability, DC-DC efficiency, and misalignment tolerance are evaluated in details, which demonstrate a peak DC-DC efficiency of 87.3% with 155.7W at 12mm and 86.7% with 237.5W at 37mm, validating the effectiveness of the designed hybrid WPT system.

19 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YWYao Wang
Yao Wang
KWKaiyuan Wang
Kaiyuan Wang
KLKerui Li
Kerui Li
Yun YangYun Yang
Yun Yang
SHShu Yuen Ron Hui
Shu Yuen Ron Hui
This article presents multimegahertz (multi-MHz) wireless power transfer technology utilizing integrated printed-circuit-board (PCB) self-resonators, designed for both inductive and capacitive power transfer (IPT and CPT) systems. The PCB resonator comprises a pair of contactless PCB-coil plates incorporating trace inductance and integrated plate capacitance. In IPT systems, the plate capacitances between PCB coils are used to compensate the trace inductances, while the trace inductances are adopted to compensate the plate capacitances in CPT systems. 300 W multi-MHz IPT and CPT systems have been developed using 210 mm × 210 mm circular PCB resonators, showcasing stable output current and voltage across a wide range of load variations. A 3 MHz IPT system is verified to operate with the maximum efficiency of 90.5% over a relatively long distance of 10 cm with strong antimisalignment but poor antiload-variation performance. On the contrary, the CPT systems operating at 3.125 MHz, 4.68 MHz, and 6.78 MHz are demonstrated to operate with the maximum efficiencies of 93.14%, 90.56%, and 83.34% over relatively short distances of 6 mm, 15 mm, and 37 mm, respectively, with strong antiload-variation but poor antimisalignment performance.

19 July 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HXHuiwen Xiao
Huiwen Xiao
Yun YangYun Yang
Yun Yang
KWKaiyuan Wang
Kaiyuan Wang
JWJiayang Wu
Jiayang Wu
In this paper, two transmitter-side model predictive control (MPC), namely a model predictive-based phase shift control (MPPC) and a model predictive-based frequency control (MPFC), are proposed for direct inductive power transfer (IPT) systems. Both MPC strategies are empirically verified to have better dynamic responses than the proportional-integral (PI)-based counterparts using inexpensive digital controllers, but the MPFC is proved to be better than the MPPC for direct IPT systems if variable frequency operations are allowed. Both Simulation and experimental results confirm that the MPPC will suffer from notching effects and high-order harmonics being caused by dead time of transmitter-side inverters, while the MPFC is immune from the dead time effects. The results also validate that the MPFC with a parallelly proposed initial frequency selection algorithm can cover the shortages of MPPC in achieving soft switching for IPT systems over wide load conditions. Besides, the transmitter-side inverter with MPFC is demonstrated to have lower radiation noise than the same inverter with MPPC in practice.

4 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KWKaiyuan Wang
Kaiyuan Wang
ZSZhen Sun
Zhen Sun
XLXinze Li
Xinze Li
YWYao Wang
Yao Wang
Yun YangYun Yang
Yun Yang
This paper introduces a spatial wireless charging system featuring a cubic transmitter (Tx) designed for strong and uniform magnetic field distribution inside the Tx container. The Tx coils are wound with two separate wires on the exterior surfaces of the container, employing a decoupled structure. The rotational current control method is employed for the Tx resonators along the x- and y-axes to improve the uniformity of the magnetic field distribution. Within the container, planar receiver (Rx) coils can achieve consistent charging with stable received voltage and maximum efficiency, regardless of the movement along the x- or y-axis, self-rotation at various positions, or revolution around the central point of the container. Practical results confirm that the proposed design exhibits smaller deviations in output voltage and overall efficiency (from DC to DC) compared to the conventional design for spatial WPT systems operating at 200 kHz and 401 kHz across the four different scenarios.