Geberemariyam Terefe

Mr. Geberemariyam Terefe


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2022 in CABI Agriculture and Bioscience
Verified
Journal Article
Open access
PDF file
GTGeberemariyam Terefe
Geberemariyam Terefe
The most prevalent by-product produced by the brewery factory is brewer's spent grain (BSG). A total of 70%, 10%, and 20% of the BSG produced are used for animal feed, biogas production, and landfills, respectively. Feeding wet brewery spent grain can avoid the cost of drying. Wet brewery spent grain is used as a replacement for forage in the diets of animals. The high moisture content and ease of deterioration of wet brewery leftover grain as a fresh feed are drawbacks (3–5 days). BSG is provided as a low-cost feed despite its greater perishability and microbiological instability. There are two significant challenges brought on by the BSG's higher moisture content (80%). First, transportation is expensive. Second, the abundance of proteins and polysaccharides in BSG promotes microbial development and deterioration. Therefore, these problems can be solved by utilizing various preservation methods, including drying (solar, freeze, and oven drying), freezing, ensiling (both alone and in combination with other animal feeds), and additives (Silo-King GPX preservatives, xylanase, carbohydrase (econase) and protease (alcalase), urea and lime, sodium formate, calcium propionate, formic and propionic acids, acetic acid, NaCl, NaOH, HCl, and H2SO4).

1 February 2022 in AMB Express
Verified
Journal Article
Open access
PDF file
GKGetu Kitaw
Getu Kitaw
MDMulisa Faji Dida
Mulisa Faji Dida
GTGeberemariyam Terefe
Geberemariyam Terefe
Brewers’ spent grain (BSG) is the amplest by-product of the brewing process. The fresh BSG is currently used as low-cost cattle feed due to its microbiological instability and high perishability. While recent research looked at the effects of storage time and temperature on the characteristics of wet brewers grains (WBG) as ruminant feeds. Three storage temperatures (15, 20, and 25 °C) and periods (2, 4 and 6 days) were arranged in a 3 × 3 factorial design. Surface spoilage was not apparent at 15 °C throughout the storage periods. Deterioration was not also observed at 20 °C until the fourth day of storage where slight mold growth was apparent. Extensive mold growth was detected late in the sixth day at 20 °C and continued manifestations up until the last day of storage at 25 °C. Changes in major nutrients, DM losses, and yeast and mold colony count were significantly affected by the interaction of storage temperatures and durations (P < 0.05). Except for samples stored at 15 °C, nutrients contents decreased concomitantly (exceptions are ADF, lignin, and loss in DM) with prolonged storage times (p < 0.05) and increasing temperatures (p < 0.05). Contrast analysis indicated that it would be safe to store under aerobic storage conditions and feed the WBG for dairy cattle.

30 May 2022 in World Journal of Microbiology and Biotechnology
Verified
Journal Article
Closed access
PDF file
GKGetu Kitaw
Getu Kitaw
GTGeberemariyam Terefe
Geberemariyam Terefe
MFMulisa Faji
Mulisa Faji

26 June 2023 in CABI Agriculture and Bioscience
Verified
Journal Article
Open access
PDF file
GTGeberemariyam Terefe
Geberemariyam Terefe
MWMulugeta Walelgne
Mulugeta Walelgne
DFDereje Fekadu
Dereje Fekadu
GKGetu Kitaw
Getu Kitaw
MDMesfin Dejene
Mesfin Dejene
YHYohannse Habteyesus
Yohannse Habteyesus
Background: Dry brewer spent yeast (DBSY) has high crude protein (CP) (43.2%) and metabolizable energy (14.3 MJ/kg) contents and it is an alternative animal feed for the improvement of the productive and reproductive performance of the animals. This study was conducted to evaluate the effect of DBSY on the chemical composition, in vitro digestibility, and in situ degradability of wheat straw (WS). Methods: Liquid brewer spent yeast (BSY) and water was mixed at a ratio of 1:5, respectively. The mixed debris soaked for 7 h in a 200-L plastic bucket. The water accumulated above the biomass was removed by tilting the container after the BSY was soaked in water. After three days of sun drying, DBSY was collected and removed with a scraper. The DBSY and wheat straw (WS) mixed uniformly. Different ratios of DBSY: WS (0:100, 10:90, 20:80, 30:70, 40:60, and 50:50, respectively, on a DM basis) were prepared. Based on these ratios, the experiment was subjected to a completely randomized design with six treatments comprising DBSY0, DBSY10, DBSY20, DBSY30, DBSY40, and DBSY50. Rumen liquor was collected from the three cannulated Boran-Friesian steers (42 months old and weighed 480 kg). The steers were fed natural pasture hay ad libitum supplemented with 2 kg concentrate per day/head. The sample was incubated in a test tube at 39 °C for 48 h with 10 ml of rumen fluid and 50 ml of buffer solution. The enzymatic digestion with acid pepsin solution was continued for another 48 h. Blank and standard samples were also incubated with buffered rumen fluid for correction and precision check-up of in vitro organic matter digestibility. Digestible organic matter in the dry matter (DOMD) was determined after drying and ashing the residues. The sample (3 g and 2 mm sieve size) with nylon bags (6.5 X 14 cm and 50 μm pore size) was entered sequentially and manually pressed deep into the liquid phase of the ventral sac of the rumen and incubated in the rumens (6, 12, 24, 48, 72, and 96 h) of three fistulated Boran × Holstein–Friesian steers. After removing the bags from the rumen, it was washed in running water for 20 min. The bags with residues were dried at 55 °C for 72 h in an air-forced oven, hot weighed, and finally, the residues recovered for further CP and neutral detergent fibre (NDF) analysis. Results: The highest ash, metabolizable energy, estimated digestible CP, DOMD, CP, Ca, P, Cu, Zn contents and the better DM, NDF, and CP ruminal degradability, and the lowest (P < 0.01) crude fibre, acid detergent fibre, NDF, K & Fe contents were observed in DBSY50 than the other DBSY inclusion level. In DBSY50, the potential degradability (PD) and effective degradability (ED) for DM of WS were improved by 52.22% and 56.17%, respectively. In DBSY50, PD and ED (NDF) in WS were increased by 60.34% and 65%, respectively. Similarly, in DBSY50, PD and ED (CP) of WS also improved by 54.20% and 63%, respectively. Conclusion: The inclusion of DBSY can improve the limited utilization of wheat straw, but this study should be verified with a feeding experiment to identify and recommend the most promising, economical and biological inclusion level of DBSY.

27 September 2024
Verified
Book Chapter
Open access
PDF file
MDMesfin Dejene
Mesfin Dejene
AKAemiro Kehaliew
Aemiro Kehaliew
FFFekede Feyissa
Fekede Feyissa
GKGezahagn Kebede
Gezahagn Kebede
GKGetu Kitaw
Getu Kitaw
DGDiriba Geleti
Diriba Geleti
Large quantities of cereals and grain legume crop residues (CRs) such as straw, stover and haulms are produced every year. They are used as a major and cheap source of livestock feed in developing countries especially during the dry season. However, the overall contribution of CRs as feed for ruminants is much less than the potential estimates because of several factors. In crop-livestock systems, most estimate of cereal CRs production and quality traits available in literature are based on the whole residue and do not represent farmer’s practices/context related to the various uses of residue fractions. In addition, there has been a strong focus on post-harvest interventions, but little adoption has been observed, with less emphasis on pre-harvest interventions and residue handling, storage and utilization. This book chapter aims to review the determinant factors and the reasons for low adoption and explores potential intervention options for improving whole-farm productivity and sustainability as a ‘win-win’ solution. Overall, understanding the local/on-farm socio-economic factors and practices/methods is crucial to estimate the production and quality of CRs/CR fractions actually available as feed for ruminants, and to select and promote the possible intervention options that are more practical for wide adoption by the smallholder farmers.

1 January 2024 in Grass Research
Verified
Journal Article
Open access
PDF file
GKGetu Kitaw
Getu Kitaw
GTGeberemariyam Terefe
Geberemariyam Terefe
MFMulisa Faji
Mulisa Faji
GMGezahegn Mengistu
Gezahegn Mengistu
MDMesfin Dejene
Mesfin Dejene
BMBethlehem Mekonnen
Bethlehem Mekonnen
The current study was aimed at evaluating the effect of genotypes (G), harvesting stages (HS), and ensiling periods (EP) on fermentation quality, nutritional value, and in vitro digestibility of organic matter in maize silage. Three factors were studied in a 3 × 2 × 3 factorial randomized complete block design: G (Kuleni, Jibat, and Kolba), HS (milk and dough stage), and EP (4, 6, and 8 weeks). Color, aroma, texture, temperature, pH, mold, and dry matter loss of the maize silage showed significant variation (p < 0.05) in the G × HS × EP interaction effect. The Jibat variety harvested at the dough stage and ensiled for 6 weeks had better (p < 0.05) color, aroma, and texture silage quality. The Kuleni variety harvested at the dough stage and ensiled for 4 and 8 weeks had a higher (p < 0.05) pH value and dry matter loss of the silage, respectively. The G × HS × EP interaction has a significant (p < 0.05) effect on partial dry matter (PDM), ash, crude protein (CP), and metabolizable energy, but neutral detergent fiber, acid detergent fiber, and organic matter digestibility showed no significant variation (p > 0.05). The PDM was higher (p < 0.05) in the Kuleni variety harvested at the dough stage and ensiled for 4 weeks, while the value of the CP was higher (p < 0.05) in the Kolba variety harvested at the milk stage and ensiled for 8 weeks. Jibat and Kolba are the two varieties of maize that are suitable for silage. As the ensiling period increased, the in vitro digestibility of organic matter improved, but ensiling for 4 weeks is important to avoid dry matter losses.