This study explores the influence of Zinc Oxide (ZnO) nanofluids on solar water heaters with Dimple Tubes and Helical Twisted Tape (DTHTT) surfaces. The helical twisted tape design enhances turbulence, improving nanofluid mixing and thermal exchange. Computational fluid dynamics (CFD) validates the efficiency of the parabolic trough solar water heater (PTSWH) with emphasis on solar light concentration and feed water flow velocity. Optimal conditions include a 0.3% ZnO nanofluid volume concentration, mass flow rates between 1.0 kg/min and 5.0 kg/min, and copper-type twisted helical tapes. Experimental results reveal Nusselt number enhancements of 15.1% and 20.96% at H/D = 10, and 16.72% and 32.12% at H/D = 3, for 0.3% ZnO nanofluid, at Reynolds numbers from 3000 to 8000. The twisted tape arrangement at H/D = 3 exhibits increased fluid mixing, leading to higher convective heat transfer. Friction factor enhancements at Reynolds numbers 3000 and 8000 are 0.26% and 0.38%, respectively, compared to the base fluid. At a 3.0 kg/min mass flow rate, thermal efficiency increases to 39.25%, a 13.25% gain over plain tapes. The model shows a ±3.24% deviation from the expected friction factor, with a total ±1.2% discrepancy between experimental and simulated findings, remaining within an acceptable range.
Epilepsy is a disorder of the brain’s nerves as a result of excessive brain cell activity. It is generally characterized by the recurrent unprovoked seizures. This neurological abnormality can be detected and evaluated using Electroencephalogram (EEG) signal. Many algorithms have been applied to achieve high performance for the EEG classification of epileptic. However, the complexity and randomness of EEG signals become a challenge to researchers in applying the appropriate algorithms. In this research, sample entropy on Multidistance Signal Level Difference (MSLD) was applied to obtain the characteristic of EEG signals, especially towards the epilepsy patients. The test was performed on three classes of EEG data: EEG signals of epilepsy patient in ictal (seizure), interictal conditions (occurring between seizures) and normal EEG signals from healthy subjects with a closed eye condition. In this study, classification and verification were done using the Support Vector Machine (SVM) method. Through the 5-fold cross-validation, experimental results showed the highest accuracy of 97.7%.
The EEG is one of the main medical instruments used by clinicians in the analysis and diagnosis of epilepsy through visual observations or computers. Visual inspection is difficult, time-consuming, and cannot be conducted in real time. Therefore, we propose a digital system for the classification of epileptic EEG in real time on a Field Programmable Gate Array (FPGA). The implemented digital system comprised a communication interface, feature extraction, and classifier model functions. The Hjorth descriptor method was used for feature extraction of activity, mobility, and complexity, with KNN was utilized as a predictor in the classification stage. The proposed system, run on a The Zynq-7000 FPGA device, can generate up to 90.74% accuracy in normal, inter-ictal, and ictal EEG classifications. FPGA devices provided classification results within 0.015 s. The total memory LUT resource used was less than 10%. This system is expected to tackle problems in visual inspection and computer processing to help detect epileptic EEG using low-cost resources while retaining high performance and real-time implementation.
5 October 2023 in Multimedia Tools and Applications