This article analyzes PVD coatings (physical vapor deposition—the coating material is vaporized and deposited by sputtering or arc evaporation, and PVD coatings are applied at lower substrate temperatures and thus can be applied to a wider range of substrates) applied to samples which are located in a fixture. This fixture enables additional rotation of the sample via the coating process. The fixture allows an increase of coated tools in one batch, and therefore an increase of the current capacity of the coating machine. The introductory section of the article describes the process of product design, including its modifications. The experimental section is focused on the functionality checking of the proposed design. The coating process was carried out on a machine named INNOVA. To guarantee the correct coating application during the process, it is necessary to research the coating thickness and the chemical composition of the samples and compare these results with the results of samples which were coated without using a designed fixture. Round bars with a diameter of 10 mm were chosen as test samples. On these samples, a FUTURA monolayer was applied on a TiAlN base. Chemical composition and coating thickness were evaluated using a scanning electron microscope (SEM). Using a fixture with a fourth rotation, the same chemical composition and coating thickness were achieved as those samples which were coated in a process without the use of a fourth rotation. Therefore, it was possible to confirm a capacity increase of the coating machine.
The topic of the article concerns the mechanics of machining plastics and their machined surface. This article deals with measurements and their stochastic (probabilistic) evaluation of the force and moment loading of the machine tools and workpiece. It also deals with the quality of the machined surface in relation to its surface roughness and surface integrity. Measurements were made under different cutting conditions on a CNC milling machine using a newly designed cutter with straight teeth. The statistical evaluation is presented by bounded histograms and basic statistical characteristics that give a realistic idea of the machining process. The practical focus of the experiments is on the milling of HPL (high-pressure plastic–laminate composite material). The listed procedures can also be applied to other materials and machining methods, and can be used for numerical modelling, setting the optimum parameters of machining technology, or for the design of cutting tools. Numerical modelling and other solution options are also mentioned. We have not yet found detailed information in the literature about the milling of HPL material, and our results are therefore new and necessary.
1 January 2025 in Journal of Emerging Topics in Industrial Engineering
This paper investigates the influence of two mechanical methods of cutting edge preparation, wet blasting and polishing, on the geometry and surface quality of cemented carbide inserts. The experiments focused on measuring the edge radius and surface roughness (Ra) at defined reference points using contact and optical profilometry. The edge radius was evaluated with a MarSurf XCR20 contact profilometer, while surface roughness was assessed using an Alicona Infinite Focus G5 optical system. Statistical analysis showed that wet blasting ensures greater process stability with lower variation in edge radius, making it suitable for applications that require consistent cutting edge geometry. On the other hand, polishing significantly decreased surface roughness, which is beneficial for reducing friction and wear and for improving the adhesion and uniformity of functional coatings. Scanning electron microscopy (SEM) confirmed the smoother and more homogeneous surface structure achieved by polishing. The results underline the importance of selecting a suitable edge preparation method according to the functional requirements of the cutting tool.