In this paper, an experimental protocol of adding rare earth lanthanum (La) was used to refine and modify inclusions (Al₂O₃) in aluminum-deoxidized steel. An optical microscope (OM), a scanning electron microscope (SEM), and an energy dispersive spectrometer (EDS) were used to study the impact of size distribution, number density, distribution uniformity, interfacial distance, area density, and so on of rare earth La on high-carbon hard wire steel inclusions. As indicated by the findings when the addition amount of La is 0.063%, the refining and homogenizing effect of Al₂O₃ inclusions in steel is the best. The average diameter of the inclusions is 1.75 μm, the uniformity is 0.84, the proportion of the interfacial spacing greater than 10 μm is 48.4%, and the area density of inclusions is set at 0.014. Based on classical thermodynamics and Factsage software, the effect of La activity on inclusion formation was computed. As indicated by the findings, the addition of rare earth La mainly combines with O and S in the liquid steel, and the La-containing inclusions wrap around the Al₂O₃ inclusions, hindering the Al₂O₃ inclusions. Through the evolution of inclusions during solidification, the modification of Al₂O₃ inclusions via rare earth La and the types of inclusions are discussed. The experimental results and theoretical calculations verify that the optimal treatment plan is to add 0.063% La.

Seismic anti-seismic rebar, as materials for supporting structures in large buildings, need to have excellent mechanical properties. By increasing the Nb content and controlling the cooling rate, the microstructure and precipitation behavior of the steel are adjusted to develop seismic anti-seismic rebar with excellent mechanical properties. Scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and a universal tensile testing machine were used to characterize the microstructure, precipitation phases, and mechanical properties of the experimental steels. The results show that the ferrite grain size, pearlite lamellae layer (ILS), and small-angle grain boundaries (LAGB) content of the high-Nb steels decreased to 6.39 μm, 0.12 μm, and 48.7%, respectively, as the Nb content was increased from 0.017 to 0.023 wt.% and the cooling rate was increased from 1 to 3 °C·s⁻¹. The strength of the {332}_α texture is the highest in the high-Nb steels. The precipitated phase is (Nb, Ti, V)C with a diameter of ~50 nm, distributed on ferrite, and the matrix/precipitated phase mismatch is 8.16%, forming a semicommon-lattice interface between the two. The carbon diffusion coefficient model shows that increasing the Nb content can inhibit the diffusion of carbon atoms and reduce the ILS. The yield strength of the high-Nb steel is 556 MPa, and the tensile strength is 764 MPa.