The molecular weight of a polymer determines key optoelectronic device characteristics, such as internal morphology and charge transport. Therefore, it is important to ensure that polymer deposition techniques do not significantly alter the native polymer molecular weight. This work addresses polymers deposited by resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE). By using a novel emulsion-based target technique, the deposition of smooth, contiguous films with no evidence of chemical degradation have been enabled. However, structural degradation via a reduction in molecular weight remains an open question. The common polymer standard, PMMA, and the optoelectronic polymers, P3HT and MEH-PPV, have been characterized before and after emulsion-based RIR-MAPLE deposition via gel permeation chromatography to determine if RIR-MAPLE affects the deposited polymer molecular weight. Proton nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy measurements have also been conducted to verify the absence of chemical degradation. These measurements verify that there is no chemical degradation of the polymers, and that PMMA and P3HT show no structural degradation, but MEH-PPV exhibits a halving of the weight-averaged molecular weight after RIR-MAPLE deposition. Compared with competing laser deposition techniques, RIR-MAPLE is shown to have the least effect on the molecular weight of the resulting thin films.
Resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a variation of pulsed laser deposition that is useful for organic-based thin films because it reduces material degradation by selective absorption of infrared radiation in the host matrix. A unique emulsion-based RIR-MAPLE approach has been developed that reduces substrate exposure to solvents and provides controlled and repeatable organic thin film deposition. In order to establish emulsion-based RIR-MAPLE as a preferred deposition technique for conjugated polymer or hybrid nanocomposite optoelectronic devices, studies have been conducted to demonstrate the value added by the approach in comparison to traditional solution-based deposition techniques, and this work will be reviewed. The control of hybrid nanocomposite thin film deposition, and the photoconductivity in such materials deposited using emulsion-based RIR-MAPLE, will also be reviewed. The overall result of these studies is the demonstration of emulsion-based RIR-MAPLE as a viable option for the fabrication of conjugated polymer and hybrid nanocomposite optoelectronic devices that could yield improved device performance.
Graded index polymer films enable novel optics using rigid or flexible substrates, such as waveguides or anti-reflection coatings. Previously, such films have been fabricated by nanoimprint lithography or the decomposition of a single component in polymer blends. Yet, it is desirable to have precise control over the polymer film composition in order to have the most flexibility in designing refractive index profiles. Resonant-infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a polymer thin film deposition technique that enables multi-layer structures on a wide variety of substrate materials, regardless of the solubilities of constituent polymers. In this work, the feasibility of tuning the refractive index of blended polymer films of polystyrene and poly(methyl methacrylate) deposited by RIR-MAPLE is demonstrated. Different polymer blend film compositions are deposited using RIR-MAPLE by varying the polymer target ratio. Transmission electron microscopy and atomic force microscopy are used to characterize the film morphology.