Energy production and storage have become key issues concerning our welfare in daily life. Present challenges for batteries are twofold. In the first place, the increasing demand for powering systems of portable electronic devices and zero-emission vehicles stimulates research towards high energy and high voltage systems. In the second place, low cost batteries are required in order to advance towards smart electric grids that integrate discontinuous energy flow from renewable sources, optimizing the performance of clean energy sources. Na-ion batteries can be the key for the second point, because of the huge availability of sodium, its low price and the similarity of both Li and Na insertion chemistries. In spite of the lower energy density and voltage of Na-ion based technologies, they can be focused on applications where the weight and footprint requirement is less drastic, such as electrical grid storage. Much work has to be done in the field of Na-ion in order to catch up with Li-ion technology. Cathodic and anodic materials must be optimized, and new electrolytes will be the key point for Na-ion success. This review will gather the up-to-date knowledge about Na-ion battery materials, with the aim of providing a wide view of the systems that have already been explored and a starting point for the new research on this battery technology.
This work presents an up-to-date information on Na-based battery materials. On the one hand, it explores the feasibility of two novel energy storage systems: Na-aqueous batteries and Na–O2 technology. On the other hand, it summarises new advances on non-aqueous Na-ion systems. Although all of them can be placed under the umbrella of Na-based systems, aqueous and oxygen-based batteries are arising technologies with increasing significance in energy storage research, while non-aqueous sodium-ion technology has become one of the most important research lines in this field. These systems meet different requirements of energy storage: Na-aqueous batteries will have a determining role as a low cost and safer technology; Na–O2 systems can be the key technology to overcome the need for high energy density storage devices; and non-aqueous Na-ion batteries have application in the field of stationary energy storage.
We review the working mechanisms, opportunity and challenges of intermediate-temperature and room-temperature sodium–sulfur batteries for low-cost energy storage.
In this paper we examine the mechanism of Na insertion and extraction in the FePO4–NaFePO4 system. Chemical preparation of the intermediate Na1−xFePO4 phase has revealed the existence of a range of stable compositions with different Na+/vacancy arrangements. The mechano-chemical aspects of the charge and discharge reactions are also discussed.
7 September 2012 in Journal of Materials Chemistry
Different samples of the sodium–vanadium fluorophosphate cathodic materials have been synthesized via the hydrothermal method, varying the type and content of carbon used in the synthesis. Structural characterization of the composites was performed by powder X-ray diffraction. Magnetic susceptibility measurements and EPR (Electron Paramagnetic Resonance) polycrystalline spectra indicate that some of the samples exhibit V3+/V4+ mixed valence, with the general formula Na3V2O2x(PO4)2F3−2x where 0 ≤ x < 1. The morphology of the materials was analyzed by Transmission Electron Microscopy (TEM). A correlation between the type and content of carbon with the electrochemical behavior of the different samples was established. Electrochemical measurements conducted using Swagelok-type cells showed two voltage plateaux at 3.6 and 4.1 V vs. Na/Na+. The best performing sample, which comprised a moderate percentage of electrochemical grade carbon as additive, exhibited specific capacity values of about 100 mA h g−1 at 1C (≈80% of theoretical specific capacity). Cyclability tests at 1C proved good reversibility of the material that maintained 98% of initial specific capacity for 30 cycles.