A dome-shaped elastic poly(l-lactide-co-caprolactone) (PLCL) scaffold with a channel and pore structure was fabricated by a combinative method of 3D printing technology and the gel pressing method (13 mm in diameter and 6.5 mm in thickness) for patient-specific regeneration. The PLCL scaffold was combined with adipose decellularized extracellular matrix (adECM) and heart decellularized extracellular matrix (hdECM) hydrogels and human adipose-derived stem cells (hADSCs) to promote adipogenesis and angiogenesis. These scaffolds had mechanical properties similar to those of native adipose tissue for improved tissue regeneration. The results of the in vitro real-time PCR showed that the dECM hydrogel mixture induces adipogenesis. In addition, the in vivo study at 12 weeks demonstrated that the tissue-engineered PLCL scaffolds containing the hydrogel mixture (hdECM/adECM (80:20)) and hADSCs promoted angiogenesis and adipose tissue formation, and suppressed apoptosis. Therefore, we expect that our constructs will be clinically applicable as material for the regeneration of patient-specific large-sized adipose tissue.
Carbon nanotubes (CNTs) have emerged as a leading nanomaterial for biomedical applications because of their extraordinary properties, which make them useful as delivery vehicles for drugs, proteins, and DNA into cells. However, the numerous applications of carbon nanotubes inevitably increase the potential risk of this nanomaterial. To address this issue, it is necessary to develop protocols for the effective and safe degradation of CNTs. In this study, we demonstrate a self-degradation route for single-wall carbon nanotubes mediated by the built-in peroxidase-like activity of bacterial magnetic nanoparticles (BMPs). Biocompatible BMPs which originated from Magnetospirillum sp. AMB-1 were directly conjugated through covalent bonding to functionalized SWNTs (f-SWNTs) without any additional functionalization processes. This SWNT–BMP hybrid was proven to exhibit highly synergetic peroxidase-like activity, and BMPs act as a highly effective intrinsic peroxidase for the self-degradation of BMP-decorated SWNTs. Moreover, it was shown to be an inhibitor that reduces the formation of β-amyloid (Aβ) fibrils, which are considered a key element in Alzheimer's disease. Thereby the SWNT–BMP hybrid exerts neuroprotective effects against β-amyloid (Aβ) fibrillation-induced neurotoxicity in SH-SY5Y human neuroblastoma cells. These results suggest that the SWNT–BMP hybrid could offer a new approach for treating or preventing neurodegenerative diseases.
7 January 2021 in Tissue Engineering and Regenerative Medicine
Three-dimensional (3D) bioprinter including screw extruder was developed, and the polycaprolactone (PCL) grafts fabricated by screw-type and pneumatic pressure-type bioprinters were comparatively evaluated. The density and tensile strength of the single layers printed by the screw-type were 14.07% and 34.76% higher, respectively, than those of the single layers produced by the pneumatic pressure-type. The adhesive force, tensile strength, and bending strength of the PCL grafts printed by the screw-type bioprinter were 2.72 times, 29.89%, and 67.76% higher, respectively, than those of the PCL grafts prepared by the pneumatic pressure-type bioprinter. By evaluating the consistency with the original image of the PCL grafts, we found that it had a value of about 98.35%. The layer width of the printing structure was 485.2 ± 0.004919 µm, which was 99.5% to 101.8% compared to the set value (500 µm), indicating high accuracy and uniformity. The printed graft had no cytotoxicity, and there were no impurities in the extract test. In the in vivo studies, the tensile strength of the sample 12 months after implantation was reduced by 50.37% and 85.43% compared to the initial point of the sample printed by the screw-type and the pneumatic pressure-type, respectively. Through observing the fractures of the samples at 9- and 12-month samples, we found that the PCL grafts prepared by the screw-type had better in vivo stability. Therefore, the printing system developed in this study can be used as a treatment for regenerative medicine.
2023 International Conference on Solid State Devices and Materials ,Positive Feedback Field Effect Transistor Based on Vertical NAND Flash Structure for In-Memory Computing