Pilling is a common surface defect in fleece fabrics made of chief value cotton (CVC) and polyester cotton (PC). The term “Chief Value Cotton” refers to fabrics produced by mixing cotton and synthetic fiber such as polyester where cotton typically makes up more than half of the overall combination of polyester. Customers nowadays want polyester cotton blended fleece fabric with excellent pilling resistance, but it is difficult to improve pilling properties in polyester cotton blended fleece fabric. A variety of studies have been conducted to improve the pilling properties of single jersey CVC knit fabric. The primary goal of this study is to eliminate pilling in fleece fabrics made of three-thread polyester cotton blends. In this analysis, singeing with a heat setting was used to increase pilling resistance. According to this experimental study, the pilling resistance properties improve from grade 1 to grade 4, which is extraordinary. This method can be used to successfully solve the pilling problem in three thread polyester cotton blended fleece fabrics in the textile knitting industry.
1 December 2020 in Cleaner Engineering and Technology
Ligno-cellulosic natural fiber like Banana can be acclimated to manufacture hybrid or union fabric with mostly used jute fiber which can get colossal popularity as a wearable product because of the health and hygiene issues. Banana fibers, extracted from the sheath, can be utilized for manufacturing fiber, can diminish the pressure on the jute fiber. It will be very frugal, and ineluctably it will be a great opportunity to blend it with the other natural fiber. In this study, a Jute-Banana hybrid fabric (JBHF) was developed by using Jute yarn (12 Ne, in warp) and Banana yarn (18 Ne, in weft). In order to evaluate physico- mechanical properties of naturally dyed Jute-Banana hybrid fabric, different tests like Stiffness, Thickness, Tensile strength, Tear strength, Drape and Crease recovery were conducted which provided satisfactory results. Colorfastness to wash, water, rubbing and perspiration of naturally dyed Jute-Banana hybrid fabrics (JBHF) also provided acceptable outcomes. FTIR test also provided the confirmation of this two fibers and Spectrophotometer was used to illustrate the dyeing quality. It was an endeavor to minimize the dependency on a single quality fiber and find an alternative way to prepare the hybrid fabric by blending two different quality natural fibers.
This research mainly characterizes a unique property of both jute and coir fiber composites. The target of the paper was to justify that unique characteristic, which featured to be the sound absorption quality of those two fiber composites. The composites involved jute and coir fibers as reinforcement and epoxy resin as polymer matrix. The analysis of the binding capability of epoxy resin and its ability to provide net shape to the composites was also an important concern for this paper. Composites of both 100% jute and coir fiber and hybrid composites of different compositions of both fibers were the elements which had gone through the sound absorption test. The proper identification of the chemical composition of the fibers and the realization of the effect of silica gel coating applied on two of the pretreated fiber samples were also some of the distinctive facts and FTIR was performed to examine that. The strength of the composites was also observed. The outcome of the sound absorption test included that, the value of the sound absorption co-efficient changed with the variety in percentage of the fibers present. There also lied a significant difference in sound absorption quality of both the pure fiber composites.
Plastic is very much indestructible even after a long period of time in the environment as it is mainly a derivative of strongly bonded long-chain petrochemical-based materials. Nowadays, plastic wastes have become an environmental hazard. However, a Starch based bio plastic can be a solution of this problem. Starch is a natural biopolymer having mainly two types of polymer glucose. In this research work, a biodegradable plastic is developed form potato starch. The advantages of starch-based plastic are its abundance and low cost. However, most of the starch-based materials exhibit very poor physico-mechanical properties like low tensile-tear strength, high stiffness, elongation at break and poor moisture stability. Improvement of starch-based bio-plastic properties is being attempted through starch modification, reinforcements (both organic and inorganic), processing conditions, and use of compatibilizers to develop substitutes for conventional plastics. The physic-mechanical properties of the biodegradable plastic have been ameliorated through some well designed processes. Several tests have been conducted on the biodegradable plastic as well as on the regular plastic in order to make a comparative study between them. Test results showed a very promising start for the biodegradable plastic for becoming the alternative of regular non-biodegradable plastics.