We have demonstrated a dual-wavelength thulium-doped fiber laser with single-longitudinal-mode (SLM) operation at ~2-μm region. A polarization-maintaining chirped Moiré fiber Bragg grating was employed as a polarization-dependent narrow-band filter, to suppress multilongitudinal-mode oscillation. Single-and dual-wavelength switchable operation was achieved by simply adjusting the polarization controller. We also showed that the laser lines retained SLM operation with the additional benefit of single polarization. Meanwhile, the dependence of each laser wavelength on the pump power was also investigated in detail.

We propose and demonstrate a four-wavelength-switchable erbium-doped fiber laser (4WS-EDFL) with a four-channel superimposed high-birefringence fiber Bragg grating (SI-HBFBG) and a dual-coupler ring based compound-cavity (DCR-CC) filter. Both for the first time, a SI-HBFBG as a four-channel reflective filter is used in a multi-wavelength switchable fiber laser to define wavelength channels and a DCR-CC filter is used to select a single mode from dense longitudinal-modes in a fiber laser. We present in detail how to design, fabricate, and characterize the DCR-CC filter with both theoretical analysis and experimental results, which we believe is the first systematic approach for making a compound-cavity based filter used for selecting single-longitudinal mode (SLM) in a fiber laser. The enhanced polarization hole burning effect in a 2.9 m long erbium-doped fiber, coiled inside a three-loop polarization controller, and the polarization-mismatch-induced losses are introduced into the laser cavity to achieve wavelength-switching operations. We show that the 4WS-EDFL can be switched among fifteen lasing states, including four single-wavelength operations, six dual-wavelength operations, four three-wavelength operations and one four-wavelength operation, all with high stability. For demonstration, in switchable single-wavelength operations, the four SLM lasing outputs measured are all with an optical signal to noise ratio of >80 dB, a linewidth of <700 Hz, a relative intensity noise of ≤−156.7 dB/Hz at frequencies over 3 MHz, an output power fluctuation of ≤0.555 dB and excellent polarization characteristics.

High stability single- and dual-wavelength compound cavity erbium-doped fiber lasers (EDFLs) with ultra-narrow linewidth, high optical signal to noise ratio (OSNR) and widely tunable range are demonstrated. Different from using traditional cascaded Type-1/Type-2 fiber rings as secondary cavities, we nest a Type-1 ring inside a Type-2 ring to form a passive subring cavity to achieve single-longitudinal-mode (SLM) lasing with ultra-narrow linewidth for the first time. We also show that the SLM lasing stability can be further improved by inserting a length of polarization maintaining fiber in the Type-2 ring. Using a uniform fiber Bragg grating (FBG) and two superimposed FBGs as mode restricting elements, respectively, we obtain a single-wavelength EDFL with a linewidth as narrow as 715 Hz and an OSNR as high as 73 dB, and a dual-wavelength EDFL with linewidths less than 1 kHz and OSNRs higher than 68 dB for both lasing wavelengths. Finally, by employing a novel self-designed strain adjustment device capable of applying both the compression and tension forces to the FBGs for wavelength tuning, we achieve the tuning range larger than 10 nm for both of the EDFLs.

A multi-wavelength thulium-doped fiber laser using a fiber-based Lyot filter is proposed in 2-μm band for the first time. In the laser cavity, the fiber-based Lyot filter is used as the comblike wavelength selection component. By adjusting two polarization controllers, a stable multi-wavelength operation is obtained at room temperature, 17 output channels within 10-dB bandwidth from 1982 to 1998 nm are achieved. The flattened spectrum of multi-wavelength operation can obtained by using the 10% output coupling ratio. The different wavelength spacing of the fiber laser can be controlled by adjusting the polarization maintaining fiber lengths of the Lyot filters.

We propose and demonstrate a high-performance wavelength-switchable erbium-doped fiber laser (EDFL), enabled by a figure-8 compound-ring-cavity (F8-CRC) filter for single-longitudinal-mode (SLM) selection and a polarization-managed four-channel filter (PM-FCF) for defining four lasing wavelengths. We introduce a novel methodology utilizing signal-flow graph combined with Mason’s rule to analyze a CRC filter in general and apply it to obtain the important design parameters for the F8-CRC used in this paper. By combining the functions of the F8-CRC filter and the PM-FCF assisted by the enhanced polarization hole-burning and polarization dependent loss, we achieve the EDFL with fifteen lasing states, including four single-, six dual-, four tri- and one quad-wavelength lasing operations. In particular, all the four single-wavelength operations are in stable SLM oscillation, typically with a linewidth of <600 Hz, a RIN of ≤−154.58 dB/Hz@≥3 MHz and an output power fluctuation of ≤±3.45%. In addition, all the six dual-wavelength operations have very similar performances, with the performance parameters close to those of the four single-wavelength operations, superior to our previous work and others’ similar work significantly. Finally, we achieve the wavelength-spacing tuning of dual-wavelength operations for photonic generation of tunable microwave signals, and successfully obtain a signal at 23.10 GHz as a demonstration.

In the present paper, we demonstrate the first outdoor free-space optical communication (FSOC) system with real-time video transmission in a 2-μm-band with a state-of-the-art data rate performance of 10 Gbit/s and a communication distance of ∼177 m. The measured wide-open eye diagram and zero bit-error-rate also validated the high communication quality. The FSOC system is constructed with all homemade components, including a single-frequency (SF) thulium-holmium co-doped fiber laser (THDFL), a modulation module, a demodulation module, three thulium-doped fiber amplifiers, an optical bandpass filter, two optical-antennas, and a display system. As the most important component, the SF THDFL, enabled by a uniform fiber Bragg grating and a passive fiber ring-compound cavity, is self-designed and fabricated by our group, presenting high lasing stability centered at 2048.98 nm, an optical signal-to-noise ratio of >81 dB, a relative intensity noise of <−128.18 dB/Hz at >0.5 MHz and a linewidth of 5.290 kHz under a measurement integration time of 0.001 s. Our work is an important step forward for practical outdoor FSOC in a 2-μm-band, proving useful for engineers and scientists when our SF THDFL is implemented as a low-cost, high-performance laser source for the FSOC system.