This article emphasizes the significance of understanding the actual thermal properties of thermal insulation materials, which are crucial for avoiding errors in building design and estimating heat losses within the energy balance. The aim of this study was to analyse the thermal parameters of selected thermal insulation materials, particularly in the context of their stability after a period of storage under specific conditions. The materials chosen for this study include commonly used construction insulations such as polystyrene and mineral wool, as well as modern options like rigid foam composites. Experimental studies were conducted, including the determination of the thermal conductivity coefficient λ, as well as numerical analyses and analytical calculations of heat flow through a double-layer external wall with a window. The numerical analyses were performed using the TRISCO software version 12.0w, based on the finite element method (FEM). A macrostructural analysis of the investigated materials was also performed. The findings indicated that improper storage conditions adversely affect the thermal properties of insulation materials. Specifically, storing materials outdoors led to a deterioration in insulating properties, with an average reduction of about 4% for the standard materials and as much as 19% for the tested composite material. Insufficient understanding of the true thermal properties of insulation materials can result in incorrect insulation layer thickness, degrading the fundamental thermal parameters of external walls. This, in turn, increases heat loss through major building surfaces, raises heating costs, and indirectly contributes to greenhouse gas emissions.

Background: Although many works focus on increasing the energy efficiency of buildings, there are still a number of problems that need to be solved, such as reducing heat losses at the window-to-wall interface, especially since the requirements for saving energy used for heating/cooling rooms are constantly increasing. This paper analyses the impact of the material parameters of the external wall and the window installation in the insulation layer on the size of thermal bridges around the window. Purpose: The aim of the work is to demonstrate the benefits resulting from the correct installation of the window, the appropriate location of the window in relation to the face of the external wall, as well as the correct selection of construction materials. Methodology: In order to show the improvement in the energy efficiency of buildings, an analysis of the heating/cooling energy consumption was carried out for the selected buildings. The thermal and humidity analyses were carried out using TRISCO program, while the economic analysis was performed using the Audytor OZC program. Results: It was found that the proposed system of window installation in the thermal insulation layer reduced the annual heating demand by at least 10% on average. Conclusions: It has been shown that the method of window installation and the type of the wall structural materials are interrelated and therefore should be considered simultaneously. Their proper selection allows for a reduction in the amount of energy needed for heating and cooling buildings, and thus a reduction of heating/cooling costs, as well as limiting greenhouse gas emissions.

External walls have a great influence on the thermal and humidity conditions in buildings as well as on the possibility of reducing energy consumption. While the structural and material aspects of walls and windows are well known, obtaining a tight connection to reduce thermal bridges between the window and walls still poses a significant problem. Therefore, a new window installation system proposed by the authors, eliminating linear and point thermal bridges at the window-to-wall interface, opens a pathway for lowering energy consumption in buildings and increasing thermal comfort and thermal efficiency. To prove the effectiveness of this system, numerical and experimental analyses of heat flow through an outer wall with a window were carried out. The numerical analyses were performed using the TRISCO software package. It was shown that the proposed solution eliminated the occurrence of linear thermal bridges at the window-to-wall interface (a linear heat transmittance coefficient Ψ ≈ 0.007, which meets the requirements of the passive house, was obtained). Thus, heat losses were reduced by nearly eight times compared to conventional installation systems. Numerical calculations were experimentally verified.

The article concerns the internal insulation of a utility room located in the attic of a building from the late 1990s. Due to the freezing of the external wall, an analysis of heat flow through this wall was conducted. Various insulation materials recommended for internal application were tested: EPS and resol board (100 mm thick) and an aerogel mat (10 mm thick). The analyses included the temperature distribution in the wall and indoor thermal conditions. Experimental studies determined the thermal conductivity coefficient (λ) of the selected insulation materials and the heat transfer coefficient for the analyzed wall. Numerical analyses were conducted with the TRISCO 12.0w software, which applies the finite element method (FEM), whereas the assessment of interlayer condensation risk was performed using the WUFI^® Pro 5.1 program.