DC- Microgrid has been widely developed for the distribution system. Energy utilizing device is easily integrated on DC – Microgrid to minimize losses in ease. In recent years, due to power distribution, -multiple energy sources are connected to DC-Microgrid. The connection of multi-sources deviates in power sharing and voltage performance is the significant challenges. To enhance the good quality of power and higher system efficiency, control strategies play a vital role. The main focus of this work is on DC-Microgrid control techniques. The conventional droop control has low current sharing and accuracy. To sort out the drawbacks, an improved primary controller is enhanced for better power sharing and accuracy. To achieve stable and dynamic current sharing scheme, secondary control strategies are reviewed. Further Multi-layer and Virtual control strategies for good voltage regulation have been reviewed. The purpose of this review is to represent on the hierarchical control structure of the DC microgrid and its three-level control architecture and this study explores distributed, centralized, decentralized, and hierarchical control techniques and discusses their strengths and weakness.
Electric vehicle systems are a promising future transportation system because they play an important role in reducing atmospheric carbon emission and have become a focal point of research and development in the present era. The emerging fast charging technology has the ability to have refueling experiences comparable to gasoline cars. This article discusses existing electric vehicle charging infrastructure with a particular emphasis on rapid charging technologies, which would be needed to meet current and potential EV refueling requirements. Various dc-dc converter topologies for battery electric and plug-in hybrid vehicles are compared and contrasted in this article in terms of performance, output power, current ripples, voltage ripples, conduction loss, recovery loss, switching frequency loss, reliability, durability, and cost. The architecture, benefits, and drawbacks of AC-DC and DC-DC converter topologies for rapid charging stations are also discussed in this article. Furthermore, this study addresses the crucial problems and difficulties associated with electric vehicle converters for direct current rapid charging. Eventually, technical and relevant contributions are provided for an electric vehicle system development.
9 August 2020 in Journal of Ambient Intelligence and Humanized Computing
Worldwide, electric vehicle (EV) sales are booming nowadays due to the rapid increase in the cost of fossil fuels. Lithium-ion batteries are very familiar in the EV industry because of their high energy per unit mass relative to other electric energy storage systems. To obtain the required voltage, several lithium-ion batteries are connected serially. Due to manufacturing inconsistencies, the voltage of serially connected cells is not always equal, which might result in a charge imbalance. This imbalance may reduce the battery’s life span due to the action of undercharging and overcharging. Battery charge equalisation (BCE) is challenging because it requires a constant voltage level in each cell. Various topologies and control strategies have been proposed in the past literature to build and improve the BCE. This study extracts the recently proposed DC-DC converter-based topologies for BCE. This study then gives a comparative analysis of various control strategies used in BCE and ends with implementing control strategies with BCE topology using a DC-DC converter. This study incorporates contextualised topologies used by BCE with design, operation, and applications. Extensive simulation results are provided to compare the performance of DC-DC converter-based BCE topologies in balancing speed. Also, a comprehensive comparison of various converter topologies and control strategies has been carried out for future investigation.