He Wang

Dr. He Wang

School of Civil Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 April 2022 in Coatings
Verified
Journal Article
Open access
PDF file
Qiaoyi LiQiaoyi Li
Qiaoyi Li
Guangqing YangGuangqing Yang
Guangqing Yang
He WangHe Wang
He Wang
ZYZhijie Yue
Zhijie Yue
The interlayer bonding strength is an essential property of geogrid-reinforced asphalt. To study the interlayer bonding characteristics of geogrid-reinforced asphalt, direct shear and oblique shear tests were carried out in the laboratory. The direct interlaminar shear strength of geogrid-reinforced asphalt was lower than that of unreinforced asphalt. The oblique shear strength of the carbon–carbon geogrid-reinforced sample was the highest, the unreinforced sample was second, and the carbon–glass geogrid-reinforced sample was the lowest. The stiffness of the geogrid affects the oblique shear strength. The interlayer direct shear strengths of AC-20C asphalt samples were higher than AC-13C asphalt samples. The oblique shear strengths of AC-20C asphalt samples were almost the same as the AC-13C asphalt samples. Normal stress made the double-layered sample tend to behave as a homogeneous granular material. The direct shear strength vs. shear displacement curves showed an area of oscillation, but the oblique shear curves were smooth throughout the process.

25 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZZZheng Zuo
Zheng Zuo
Guangqing YangGuangqing Yang
Guangqing Yang
ZWZhijie Wang
Zhijie Wang
He WangHe Wang
He Wang
Jing JinJing Jin
Jing Jin
Geogrid-reinforced structures are extensively adopted in various engineering fields. At present, the influence of boundary conditions was not considered in design methods, bringing hidden dangers to the safety of the structure. In the current study, a series of pullout tests were carried out on high-density polyethylene (HDPE) geogrid-reinforced coarse sand. The magnitude and growth pattern of pullout resistance and the variation laws of interfacial shear strength indexes under four types of boundary conditions were analyzed. Additionally, the boundary reduction coefficient (BRC) was introduced to establish the relationship between rigid and flexible boundary for the design of the structure. The tests results showed that the boundary conditions cannot be ignored in the design of structures, especially in the front. When the normal loading was up to 120 kPa, the BRC-top and BRC-positive could be taken as 0.9 and 0.5, respectively, and verified by fitting results. The boundary conditions affected the pullout resistance, while the vertical loading corresponding to the maximum pullout resistance was not related to boundary conditions. Investigating the interaction of the geogrid–soil under different boundary conditions can help to improve the understanding of the behavior of reinforced soil structure, and to achieve a more efficient and economical design.

5 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Guangqing YangGuangqing Yang
Guangqing Yang
YZYunfei Zhao
Yunfei Zhao
He WangHe Wang
He Wang
ZWZhijie Wang
Zhijie Wang
Back-to-back geosynthetic-reinforced soil walls (BBGRSWs) are commonly used in embankments approaching bridges and narrow spaces. However, the available literature and design guidelines for BBGRSWs are limited. The aims of this research were to develop a greater understanding of the working performance of BBGRSWs and to optimize the design method of a BBGRSW to ensure the cost-efficiency as well as the stability of the structure. On the basis of a monitored BBGRSW structure located in China, we established a numerical model. The parameters of the materials used in the actual project were determined through triaxial and tensile tests. The numerical results were compared with the measured results in the field to verify the correctness of the selected parameters. Two parameters were investigated by the FEM method: the reinforcement length and the arrangement. The FEM analysis indicated that post-construction deformations such as displacement and settlement could be reduced by reinforcing the same layer on both sides. Longer reinforcements were needed to achieve the same performance if the reinforcements were cross-arranged. Thus, BBGRSWs can have a superior performance if the reinforcements are connected in the middle from both sides. Even with longer reinforcements, the safety factor of the wall with a cross-arranged reinforcement was smaller than that with same-layered reinforcements.

24 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
He WangHe Wang
He Wang
NWNan Wang
Nan Wang
GYGuangqing Yang
Guangqing Yang
JMJian Ma
Jian Ma
The stress diffusion characteristics of reinforced soil retaining walls (RSW) with concrete-block panels under cyclic loads are studied. The distribution of the vertical dynamic earth pressure caused by an external load and the analysis of stress diffusion angles were studied using a model test and the numerical simulation model of the reinforced soil retaining wall was established to analyze the change in the stress diffusion angle. We then changed the parameters to investigate the influencing factors of the stress diffusion characteristics. The results showed that: the average value of the peak vertical dynamic earth pressure caused by an external load at the loading position of the RSW was a nonlinear distribution, decaying from top to bottom and increasing with the increase in the loading amplitude, while the change in the loading frequency number of loading cycles had no obvious rule. The results of model test and numerical simulation agree with each other. The diffusion angle of the stress caused by the external load of the reinforced body was basically between 50° and 65° in the range from 1.8 m to 1.2 m, the diffusion angle at the top was slightly larger than the middle, and the diffusion angle away from the wall was larger than the diffusion angle close to the wall. The main factors affecting the stress diffusion in reinforced soil retaining walls are the coefficient of reinforcement of the soil and the dynamic stress amplitude; the stress diffusion angle increased with an increase in the coefficient of the reinforcement of the soil and the dynamic stress amplitude. The conclusion of this paper can provide a reference for the design of reinforced soil structures.

25 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Guangqing YangGuangqing Yang
Guangqing Yang
PSPenghui Su
Penghui Su
PXPeng Xu
Peng Xu
ZWZhijie Wang
Zhijie Wang
He WangHe Wang
He Wang
ZZZheng Zuo
Zheng Zuo
Geocells are three-dimensional honeycomb-reinforced geotechnical materials composed of strips and junctions. Its junctions can support and transmit forces in several directions. The performance of geocells has a considerable impact on engineering applications. However, the testing program of geocell junctions still lacks standardization, and limited research has been undertaken regarding the failure mechanisms of junctions when subjected to various stress types. In this paper, four test procedures for HDPE welded geocell junctions were performed, including weld tensile, shear, peeling, and splitting strength tests. The influence of tests under different clamping distances (10.5 mm, 25 mm, 50 mm, and 100 mm) was analyzed, and the stress–strain behavior, peak elongation, and peak and residual strength of junctions under various force states were analyzed in detail. Finally, considering the strength and deformation, the slope laying method of geocells was proposed. The results show that the tensile strength and shear strength decrease with the clamping distance, whereas the peeling strength and splitting strength remain essentially unchanged. Under a 100 mm clamping distance, the tensile strength and shear strength are decreased by 4.51% and 14.08%. Geocells spreading vertically along the surface on a subgrade slope are thought to be more reliable, improving the geocell’s service life in slope protection. The test results can be used to improve a standardized geocell junction testing procedure as well as to guide, evaluate, and enhance the quality and application dependability of geocells.

12 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
He WangHe Wang
He Wang
JMJian Ma
Jian Ma
GYGuangqing Yang
Guangqing Yang
NWNan Wang
Nan Wang
The stress-distribution angle is an important parameter for the design of retaining walls and foundation beds and has a non-negligible role in the rationality of engineering design. There is a lack of research on stress distribution in reinforced earth-retaining walls under cyclic loading. In order to study the stress distribution characteristics of geogrid-reinforced soil-retaining walls (GRSW) under cyclic loading, the stress distribution characteristics of GRSW under a different number of load cycles were analyzed by field tests, and the effects of the length of reinforcement, the friction coefficient of the reinforcement–soil interface and the modulus of reinforcement on the stress distribution characteristics of GRSW were analyzed by numerical simulation. The results show that, with the increase in the number of load cycles, the vertical dynamic earth pressure shows a noticeable decreasing trend from high to low along the wall height. The vertical dynamic earth pressure increases first and then decreases along the length of reinforcement. When the number of load cycles increases to more than 100,000, the stress-distribution angle of the GRSW does not change much, the upper part remains at 35~79°, and the middle part remains at 47~68°. The influence depth of stress distribution in GRSW is about 1.13 times the wall height. The interfacial friction coefficient of reinforced soil has a superior influence on the stress distribution in GRSW, followed by the length and modulus of reinforcement.