The joining of Al and Cu commercially pure metals using the compound casting process has been investigated where an aluminium melt is cast onto a solid cylindrical copper insert. The microstructure of the interface between copper core and surrounding aluminium was characterised by optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and Vickers hardness tests. Results showed that five separate reaction layers are formed in the reaction interface of core and surrounding Al. These layers included Cu9Al4, AlCu and Al2Cu intermetallic compounds; a eutectic layer; and a eutectic α-Al dendritic structure layer. Owing to the presence of hard and brittle intermetallic compounds within reaction layers, microhardness profile showed a peak of 300 HV where both parent metals have hardness <50 HV. Microhardness profile also showed that hardness decreases from the copper to the aluminium side.
22 April 2011 in Materials and Manufacturing Processes
Continuous carbon fiber reinforced aluminum composite samples were produced by squeeze casting method, under applied pressures of 30, 50, and 70 MPa. For production of samples, nickel coated and uncoated carbon fibers with a mean volume fraction of 40% were used. After making the fiber preforms, they were preheated and then were replaced in a casting die. Molten 2024 aluminum alloy having a temperature of 750°C was poured into the die, and different amount of pressures were applied to infiltrate the melt into the carbon fiber bundles. The effect of applied pressure on infiltration mechanism and microstructure of the composite were studied, by evaluating the cross-section of the composite samples, using optical and scanning electron microscopes (SEM). The appropriate applied pressures for producing the composite samples for uncoated and nickel coated fibers were different, and the best results were achieved at 50 and 30 MPa, respectively. A specific or a certain range of pressure seems to be suitable for reaching to an appropriate microstructure in uncoated and coated samples. The results indicated that applying nickel coating on carbon fibers improves the infiltration of molten aluminum into the carbon fiber bundles and thus reduces the pressure required for infiltration significantly.
1 August 2007 in International Journal of Cast Metals Research