Three green algae, collected from the Romanian Black Sea coast, are studied: Ulva lactuca, Enteromorpha intestinalis, and Cladophora vagabunda, which were collected from six different coastal areas. This paper aims to identify the bioactive compounds of these green algae and their beneficial properties, in order to use them as potential nutraceuticals using different analytical methods. Pharmacognostic, microbiological, and physico-chemical methods used for the analysis of algal materials revealed a rich and diverse array of biocompounds with nutritional value. In the case of green algae, a high percentage of sulphates, carbohydrates and dietary fibers were identified. Moisture, ash, total nitrogen, protein and lipid contents were determined. The contents of pigments, vitamins, and metals determined complement the nutritional qualities of the three seaweed species studied as future nutraceuticals. The content of flavonoid and phenolic compounds identified in the composition of seaweeds justifies their antioxidant and antimicrobial properties. The antioxidant capacity was tested by means of DPPH, reducing power, and TEAC methods, and the algae studied exhibit important antioxidant properties that can be used to enhance their potential as nutraceuticals. The studied algae show good antibacterial activity on both Gram (+) and Gram (−) bacteria, with slightly better activity on Gram (−) bacteria. Biocompounds from green algae from the Black Sea coast may represent an important source of marine nutraceuticals with medical and nutritional potential.

The global trend is to find new materials with improved environment friendly. The sustainable development of 2030 AGENDA and Waste Management Legislation sustain the disposal of a large quantity of slag at landfill sites by causing environmental consequences which has drawn attention to the need for its more effective recycling. Heavy industries have been operating in the Galati area for over 30 years and an ecological education is necessary for an efficient management of waste slag. The agricultural land resources are an issue world-wide and through this investigative study we showed that the mixture of blast furnace slag and waste slag dumped in landfill can help remediation of the soil acidity and increasing the crop yield. The chemical, structural and morphological properties of three investigated different slag samples are evaluated for recycling in agriculture. Results indicated that the obtained mixture of the slag waste dumped in landfill and of granulated metallurgical slag shows its usage in saving the affected lands. Therefore, by elemental analysis determined by X-ray fluorescence analytical equipment, the optimum weight ratio for the composition of soil-slag mixture were achieved. The obtained mixture presents a balance between soil pH = 5.2 corresponding to a medium acid soil and slag pH = 12.5 which corresponds as strongly basic character which is beneficial in amelioration process of acidic soils for the improving of soil characteristics.

Nicotine and cotinine are very polar basic molecules, which makes it difficult to analyze them by reversed-phase liquid chromatography (RPLC), especially in biological samples. Additives with an ionic character have been traditionally used in RPLC as silanol suppressors. The aim of our study was to investigate the potential of selected ionic liquids in improving chromatographic performance in comparison with common additives. The experimental design was conducted using the following ionic liquids as the mobile phase modifiers: 1-butyl-3-methylimidazolium tetrafluoroborate, BMIM[BF₄] and 1-butyl-3-methylimidazolium hexafluorophosphate BMIM[PF₆], with a C18 chromatographic column. The separation of these alkaloids on silica-based RPLC stationary phases was successfully conducted by the addition of BMIM[BF₄] in an acetonitrile:phosphate-buffer-based mobile phase in a pH range of 2.3–5.2. The presented chromatographic method can be used as alternative for monitoring studies or pharmacokinetic application necessary for the evaluation of tobacco smoke exposure.

Pure titanium (Ti) is investigated in a pre-clinical study in Hank’s biological solution using electrochemical methods, open circuit potential, and electrochemical impedance spectroscopy to highlight the time effect in extreme body conditions, such as inflammatory diseases, on degradability due to corrosion processes occurring on the titanium implant. Electrochemical impedance spectroscopy (EIS) data are presented as Nyquist and Bode plots. The results show the increasing reactivity of titanium implants in the presence of hydrogen peroxide, which is an oxygen-reactive compound that describes inflammatory conditions. The polarization resistance, which results from electrochemical impedance spectroscopy measurements, declined dramatically from the highest value registered in Hank’s solution to smaller values registered in all solutions when different concentrations of hydrogen peroxide were tested. The EIS analysis provided insights into titanium’s in vitro corrosion behavior as an implanted biomaterial, which could not be solely obtained through potentiodynamic polarization testing.

The purpose of this study is to evaluate the corrosion resistance in natural seawater (Năvodari area) of two types of low-alloy carbon steels BVDH36 and LRAH36 by electrochemical methods. The electrochemical methods used were the evolution of the free potential (OCP), electrochemical impedance spectroscopy (EIS), polarization resistance (R_p) and corrosion rate (V_corr), potentiodynamic polarization (PD), and cyclic voltammetry (CV). The studies were completed by ex situ characterization analyzes of the studied surfaces before and after corrosion such as: optical microscopy, scanning electron microscopy and X-ray diffraction analysis. The results of the study show us that the polarization resistance of the low-alloy carbon steel BVDH36 is higher compared to the polarization resistance of the low-alloy carbon steel LRAH36. It is also observed that with the increase in the immersion time of the samples in natural seawater, the polarization resistance of the BVDH36 alloy increases over time and finally decreases, and for the carbon steel LRAH36 the polarization resistance increases.

In the field of healthcare and dentistry, 316L stainless steel is widely used for its corrosion resistance. However, the presence of lactic acid in salivary solutions can affect its surface reactivity. This study employed electrochemical methods to investigate the influence of lactic acid on 316L stainless steel’s corrosion resistance in Fusayama Meyer saliva and saliva doped with varying lactic acid concentrations. The results revealed a significant decrease in polarization resistance as the lactic acid concentration increased, despite a shift toward more positive corrosion potentials. Consequently, the study suggests that the lactic acid presence in salivary solutions should be considered when evaluating the corrosion susceptibility of 316L stainless steel devices.