Lithium-sulfur (Li-S) batteries with the merits of high theoretical capacity and high energy density have gained significant attention as the next-generation energy storage devices. Unfortunately, the main pressing issues of sluggish reaction kinetics and severe shuttling of polysulfides hampered their practical application. To overcome these obstacles, various strategies adopting high-efficient electrocatalysts have been explored to enable the rapid polysulfide conversions and thereby suppressing the polysulfide shuttling. This review first summarizes the recent progress on electrocatalysts involved in hosts, interlayers, and protective layers. Then, these electrocatalysts in Li-S batteries are analyzed by listing representative works, from the viewpoints of design concepts, engineering strategies, working principles, and electrochemical performance. Finally, the remaining issues/challenges and future perspectives facing electrocatalysts are given and discussed. This review may provide new guidance for the future construction of electrocatalysts and their further utilizations in high-performance Li-S batteries.
Acicular goethite (α-FeOOH) nanopowders were synthesized at a high temperature via a CTAB-assisted hydrothermal method. Their morphologies, mechanism of saturation magnetization and coercivity, and conversion to rice-like α-Fe2O3 after annealing are studied. It is found that the α-FeOOH should be synthesized at a temperature lower than 240 °C, and the acicular α-FeOOH structure actually consists of slender α-FeOOH nanorods. With the increase of CTAB content from 0.2 g to 0.4 g, the synthesized α-FeOOH nanorods become more and more slender, accompanying with the enhancement of the saturation magnetization from about 0.05 emu g−1 to about 0.25 emu g−1, which can be ascribed to the increase of the surface area of the α-FeOOH nanorods. The as-synthesized acicular α-FeOOH powders exhibit a large coercivity with a maximum value of about 120 kA m−1 (∼1500 Oe) due to the shape anisotropy. It is also found that the acicular α-FeOOH powders gradually convert to rice-like α-Fe2O3 particles after annealing at high temperatures.