Optical phased array has become a potentially critical component for beam scanner benefiting from its advantages in cost, mass production, integration, stability and scanning rate. However, the practicalization of OPA still has some great challenges, such as complex circuit control and the need for pre-calibrated phase. In this paper, we propose two passive OPA chips based on silicon nitride delay lines, which can achieve two-dimensional scanning only by wavelength tuning. The two passive OPA chips have different delay line lengths between 128 channels, achieving 2D scanning efficiency of 0.44°/nm×0.07°/nm and 0.87°/nm×0.07°/nm. The beam quality of both passive OPA chips is excellent, with a side lobe level of about 12 dB, without any degradation compared to the OPA chip without the delay line. The delay length of the proposed passive OPA chip can be further increased to obtain denser 2D scans, thereby improving the practicality of the OPA chip.
7 February 2024 in Journal of Lightwave Technology
The focal plane array (FPA) is a promising solution for light detection and ranging (LiDAR) that offers advantages such as low optical loss, low power consumption, and a simple system architecture. To enhance the ranging performance of the FPA, we propose a novel structure featuring a single antenna for transmitting the laser beam and an antenna array for receiving the return signal. The theoretical directionality of the antennas is up to 91.6%. Utilizing the above structure, we fabricated a 6-channel FPA chip and successfully demonstrated scanning of object shapes. This chip is scalable and offers technical support for the development of larger-scale solid-state LiDAR.
Due to the advantages of fast scanning speed, good stability, flexible pointing, high resolution, small size and low cost, optical phased array has become a potential key component of beam scanners. The effective aperture of optical phased array determines properties such as divergence angles and ranging distance, and how to achieve it has been of interest to researchers. In this letter, we have designed and fabricated a 1024-channel passive optical phased array chip. A small divergence angle (0.05 $^{\circ }\,\,\times 0.04^{\circ }$ ) has been achieved by adopting a Si 3 N 4 perturbation grating structure on Si waveguide. Based on this chip, we have built a coherent detection demonstration system and carried out relevant experiments with it.
Antennas are important components in optical phased arrays. However, their far-field performance deteriorates when random phase noise is introduced because of fabricating errors. For the first time, we use a finite-difference time-domain solution to quantitatively analyze the far-field characteristics of Si and Si3N4 antennas considering process errors. Under rough surface conditions based on a fishbone structure, we find that the quality of the main lobe of the Si antenna deteriorates badly, with −0.87 dB and −0.51 dB decreases in the sidelobe level and 5.78% and 3.74% deteriorations in the main peak power in the φ (phase-controlled) and θ (wavelength-controlled) directions, respectively. However, the Si3N4 antenna is only slightly impacted, with mere 0.39% and 0.71% deteriorations in the main peak power in the φ and θ directions, respectively, which is statistically about 1/15 of the Si antenna in the φ direction and 1/5 in the θ direction. The decreases in the sidelobe level are also slight, at about −0.08 dB and −0.01 dB, respectively. Furthermore, the advantages of the Si3N4 antenna become more remarkable with the introduction of random errors into the waveguide width and thickness. This work is of great significance for the design and optimization of OPA chips.
31 March 2026 in Journal of the Optical Society of America B
A methodical study of a LiDAR light source based on microstructured edge-emitting lasers intended for controlled beam steering in integrated photonic systems is presented in this paper. Periodic shallow slot structures are incorporated into the laser ridge to enable directional emission while preserving beam quality. The proposed device is particularly adequate for compact, solid-state LiDAR and other integrated photonic sensing applications demanding exact angular control since the given microstructure geometry successfully strikes a balance between optical extraction efficiency and low divergence. The results reveal a significant reduction in divergence angle from 2.8° down to 0.84° as the grating period increases, demonstrating enhanced beam collimation and directionality that enables precise beam steering across a wide angular range. This capability makes the design highly suitable for compact, efficient on-chip LiDAR systems, offering a promising solution for integrated photonic sensing applications requiring precise directional emission.