Two different versions of an optical theorem for a scattering body embedded inside a lossy background medium are derived in this paper. The corresponding fundamental upper bounds on absorption are then obtained in closed form by elementary optimization techniques. The first version is formulated in terms of polarization currents (or equivalent currents) inside the scatterer and generalizes previous results given for a lossless medium. The corresponding bound is referred to here as a variational bound and is valid for an arbitrary geometry with a given material property. The second version is formulated in terms of the T-matrix parameters of an arbitrary linear scatterer circumscribed by a spherical volume and gives a new fundamental upper bound on the total absorption of an inclusion with an arbitrary material property (including general bianisotropic materials). The two bounds are fundamentally different as they are based on different assumptions regarding the structure and the material property. Numerical examples including homogeneous and layered (core-shell) spheres are given to demonstrate that the two bounds provide complimentary information in a given scattering problem.
8 December 2020 in Journal of the Optical Society of America B
In this paper, wave propagation in a hollow waveguide with a graded dielectric layer is studied. Analytic formulas are derived for the electric field components as well as general analytical results for the reflection and transmission coefficients for propagating waves. These results are all valid for waveguides of arbitrary cross sections, and the derived reflection and transmission coefficients are in exact asymptotic agreement with those obtained for a very thin homogeneous dielectric layer using cascading and mode-matching techniques. Furthermore, the power transmission, reflection, and absorption coefficients, as functions of frequency and layer width, are studied, showing the expected behavior of these parameters. The method proposed in this paper gives directly applicable results that do not require cascading and mode matching, while at the same time having the ability to model smooth transitions that are more realistic in several applications.
The current synthetic-aperture-radar (SAR) image formation algorithms have been developed for the pulse radar systems, and they are desired to be used for frequency modulated continuous wave (FMCW) radar systems. Since there is a difference between the outputs of pulse radar and FMCW radar, it is necessary to adapt these algorithms to the output of the pulse radar. Beside this, the start-stop approximation, which can be used for signal processing of pulse radar systems, should be taken into account for FMCW radar systems due to the fact that the pulse duration of pulse radar is relatively small in comparison to the modulation time of FMCW radar. The study investigates the phase error caused by the start-stop approximation in processing the data measured by a FMCW radar system for synthetic aperture imaging. The important finding is that the start-stop approximation is valid for processing FMCW SAR data in many cases. If the following circumstances occur simultaneously, such as high radar signal frequency, long modulation time, high platform speed, and short propagation range, then the approximation may become invalid. The simulations and the experiments performed with a wideband 154 GHz FMCW radar support this statement.
Time-domain backprojection algorithms are widely used in state-of-the-art synthetic aperture radar (SAR) imaging systems that are designed for applications where motion error compensation is required. These algorithms include an interpolation procedure, under which an unknown SAR range-compressed data parameter is estimated based on complex-valued SAR data samples and backprojected into a defined image plane. However, the phase of complex-valued SAR parameters estimated based on existing interpolators does not contain correct information about the range distance between the SAR imaging system and the given point of space in a defined image plane, which affects the quality of reconstructed SAR scenes. Thus, a phase-control procedure is required. This paper introduces extensions of existing linear, cubic, and sinc interpolation algorithms to interpolate complex-valued SAR data, where the phase of the interpolated SAR data value is controlled through the assigned a priori known range time that is needed for a signal to reach the given point of the defined image plane and return back. The efficiency of the extended algorithms is tested at the Nyquist rate on simulated and real data at THz frequencies and compared with existing algorithms. In comparison to the widely used nearest-neighbor interpolation algorithm, the proposed extended algorithms are beneficial from the lower computational complexity perspective, which is directly related to the offering of smaller memory requirements for SAR image reconstruction at THz frequencies.
We introduce the set of quasi-Herglotz functions and demonstrate that it has properties useful in the modelling of non-passive systems. The linear space of quasi-Herglotz functions constitutes a natural extension of the convex cone of Herglotz functions. It consists of differences of Herglotz functions and we show that several of the important properties and modelling perspectives are inherited by the new set of quasi-Herglotz functions. In particular, this applies to their integral representations, the associated integral identities or sum rules (with adequate additional assumptions), their boundary values on the real axis and the associated approximation theory. Numerical examples are included to demonstrate the modelling of a non-passive gain medium formulated as a convex optimization problem, where the generating measure is modelled by using a finite expansion of B-splines and point masses.
27 July 2021 in IEEE Transactions on Biomedical Engineering
Abstract Objective: An imaging device to locate functionalized nanoparticles, whereby therapeutic agents are transported from the site of administration specifically to diseased tissues, remains a challenge for pharmaceutical research. Here, we show a new method based on electrical impedance tomography (EIT) to provide images of the location of gold nanoparticles (GNPs) and the excitation of GNPs with radio frequencies (RF) to change impedance permitting an estimation of their location in cell models Methods: We have created an imaging system using quantum cluster GNPs as a contrast agent, activated with RF fields to heat the functionalized GNPs, which causes a change in impedance in the surrounding region. This change is then identified with EIT. Results: Images of impedance changes of around 804% are obtained for a sample of citrate stabilized GNPs in a solution of phosphate-buffered saline. A second quantification was carried out using colorectal cancer cells incubated with culture media, and the internalization of GNPs into the colorectal cancer cells was undertaken to compare them with the EIT images. When the cells were incubated with functionalized GNPs, the change was more apparent, approximately 402%. This change was reflected in the EIT image as the cell area was more clearly identifiable from the rest of the area. Significance: EIT can be used as a new method to locate functionalized GNPs in human cells and help in the development of GNP-based drugs in humans to improve their efficacy in the future.