We propose and demonstrate a simple dual port tunable from the C- to the L-band multi-wavelength fiber laser based on a SOA designed for C-band operation and fiber loop mirrors. The laser incorporates a polarization maintaining fiber in one of the fiber loop mirrors and delivers multi-wavelength operation at 9 laser lines with a wavelength separation of ~2.8 nm at room temperature. We show that the number of lasing wavelengths increases with the increase of the bias current of the SOA. Wavelength tunability from the C to L-band is achieved by exploiting the gain compression of a SOA. Stable multi-wavelength operation is achieved at room temperature without temperature compensation techniques, with measured power and the wavelength stability within < ±0.5 dB and ±0.1 nm, respectively.
We propose and demonstrate a simple compact, inexpensive, SOA-based, dual-wavelength tunable fiber laser, that can potentially be used for photoconductive mixing and generation of waves in the microwave and THz regions. A C-band semiconductor optical amplifier (SOA) is placed inside a linear cavity with two Sagnac loop mirrors at its either ends, which act as both reflectors and output ports. The selectivity of dual wavelengths and the tunability of the wavelength difference (Δλ) between them is accomplished by placing a narrow bandwidth (e.g., 0.3 nm) tunable thin film-based filter and a fiber Bragg grating (with bandwidth 0.28 nm) inside the loop mirror that operates as the output port. A total output power of + 6.9 dBm for the two wavelengths is measured and the potential for higher output powers is discussed. Optical power and wavelength stability are measured at 0.33 dB and 0.014 nm, respectively.
A widely tunable (30 nm) fiber laser based on a double Sagnac loop mirror configuration is proposed and demonstrated. A semiconductor optical amplifier (SOA) placed between the two loop mirrors acts as the gain medium. The fiber laser has two output ports with adjustable optical power outputs. Wavelength tunability is obtained through the use of a thin film tunable filter, while optical power adjustability is accomplished by proper adjustment of each of the loop mirror reflectivity via a polarization controller. A total output power of + 9 dBm is measured and the potential for higher output powers is discussed. Optical power stability of better than ± 0.15 dB is measured for 6 hours.
A simple, stable and inexpensive dual-output port widely tunable semiconductor optical amplifier (SOA)-based fiber compound-ring laser structure is demonstrated. This unique nested ring cavity enables high optical power to split into different branches where amplification and wavelength selection are achieved by using low-power SOAs and a tunable filter. Furthermore, two Sagnac loop mirrors, which are spliced at the two ends of the compound-ring cavity not only serve as variable reflectors but also channel the optical energy back to the same port without using any high optical power combiner. We propose and discuss how the demonstrated fiber compound-ring laser structure can be extended in order to achieve a high power fiber laser source by using low power optical components, such as N × N couplers and (N > 1) number of SOAs. A coherent beam-combining efficiency of over 98% for two parallel nested fiber ring resonators is achieved over the C-band tuning range of 30 nm. Optical signal-to-noise ratio (OSNR) of +45 dB, and optical power fluctuation of less than ±0.02 dB are measured over three hours at room temperature.
Due to reduced operational and equipment costs, time division multiplexed (TDM)-based passive Optical Network (PON) access solutions including Gigabit PON (GPON) and Ethernet PON (EPON) have been widely accepted as a viable technology for the implementation of fiber-to-the-x (FTTx) solutions, and are being deployed globally. Users are increasingly requiring more bandwidth for high end applications and at the same time greater mobility. The convergence of fiber and wireless systems is seen as the optimum solution to offer the combination of the fiber capacity and the wireless mobility. PON has been proposed as a backhaul for wireless. Typical architectures are traditionally deployed as tree topologies. However, tree-based topologies have several inherent drawbacks such as inability to support a truly shared Local Area Network (LAN) capability among end users. In this paper, we propose scalable ring-based architectures that offer truly shared LAN capability as well as dynamic bandwidth allocation. These architectures are ring-based as well as hybrid, combination of tree-based and ring-based. These flexible architectures can be used as the back-haul to wireless by incorporating the base stations in the ONU locations. Our proposed hybrid PON ring architecture is scalable to 78 ONUs without the use of any amplifiers and in addition, the basic ring architecture and in turn the hybrid one is transparent to protocols and data rates and hence allows for greater BW flexibility as well as greater number of serviced end-users.