A new structural fluorine-containing methacrylate monomer CH2=C(CH3)COOC–(CF3)2CF2CF2CF3 (5) was synthesized derived from perfluoro-2-methyl-2-pentene (D2). A homopolymer of 5 and copolymers of 5 and methacrylate with different alkyl chain length (chain length n = 1, 2, 4, 6, 8, 12, 18) were obtained. These new fluorinated acrylate polymers showed excellent water and oil repellency. The contact angle of the films of the homopolymer and part of the copolymers were similar with the corresponding polymers prepared from CH2=CHC(O)OCH(C3F7)(CF(CF3)2), but greater than that of the C6F13(CF3)CHOC(O)CH=CH2 homopolymer. The structure-property relationship research indicated that the copolymers’ hydrophobicity decreased first and then increased with the increase of alkyl chain length. Td of all the polymers were greater than 220 °C and Tg fluctuated within the range of −51~103.8 °C. Contact angle and Tg could be adjusted by controlling the feed ratio of monomer to meet the requirements of technical indicators in the practical applications. The outstanding liquid repellency and thermal stability make monomer 5 a promising alternative to perfluorinated long-chain fluorosurfactants.
The production of vinyl chloride (VCM) by pyrolysis of 1,2-dichloroethane (DCE) is an important process in the ethylene-based poly(vinyl chloride) industry. The pyrolysis is performed at temperatures above 500 °C, gives low conversions, and has high energy consumption. We have shown that N-doped carbon catalysts give excellent performances in DCE dehydrochlorination at 280 °C. The current understanding of the active sites, mechanism, and kinetics of DCE dehydrochlorination over N-doped carbon catalysts is limited. Here, we showed that pyridinic-N on a N-doped carbon catalyst is the active site for catalytic production of vinyl chloride monomer from DCE. The results of CO2 and DCE temperature-programmed desorption experiments showed that the pyridinic-N catalytic sites are basic, and the mechanism of dehydrochlorination on a N-doped carbon catalyst involves a carbanion. A kinetic study of dehydrochlorination showed that the surface reaction rate on the N-doped carbon catalyst was the limiting step in the catalytic dehydrochlorination of DCE. This result enabled clarification of the dehydrochlorination mechanism and optimization of the reaction process. These findings will stimulate further studies to increase our understanding of the relationship between the base strength and catalytic performance. The results of this study provide a method for catalyst optimization, namely modification of the amount of pyridinic-N and the base strength of the catalyst, to increase the surface reaction rate of DCE dehydrochlorination on N-doped carbon catalysts.
Vinyl chloride, the monomer of polyvinyl chloride, is produced primarily via acetylene hydrochlorination catalyzed by environmentally toxic carbon-supported HgCl2. Recently, nitrogen-doped carbon materials have been explored as metal-free catalysts to substitute toxic HgCl2. Herein, we describe the development of a cationic covalent triazine network (cCTN, cCTN-700) that selectively catalyzes acetylene hydrochlorination. cCTN-700 exhibited excellent catalytic activity with initial acetylene conversion, reaching ~99% and a vinyl chloride selectivity of >98% at 200 °C during a 45 h test. X-ray photoelectron spectroscopy, temperature programmed desorption, and charge calculation results revealed that the active sites for the catalytic reaction were the carbon atoms bonded to the pyridinic N and positively charged nitrogen atoms (viologenic N+) of the viologen moieties in cCTN-700, similar to the active sites in Au-based catalysts but different from the those in previously reported nitrogen-doped carbon materials. This research focuses on using cationic covalent triazine polymers for selective acetylene hydrochlorination.
Branched fluorinated surfactants with creatively introduced acrylate in the hydrophilic group were designed and prepared by adopting perfluoro-2-methyl-2-pentene as the raw substrate. These new compounds showed excellent surface properties, and the surface tension of their aqueous solution at 25 °C could be below 20.00 mN/m at the critical micelle concentration. Compared with similar structures we have synthesized previously, these synthesized compounds exhibit a great improvement with regard to their molecular arrangement at the gas–liquid interface, their polymerizability, and the antibacterial properties of their polymer form, which can provide new ideas in the work to replace perfluorooctane sulfonate/perfluorooctanoic acid.