Summary: Understanding proppant transport and distribution in hydraulic fractures is crucial to designing and optimizing hydraulic fracturing treatments in the field. The actual fracture surfaces are typically rough and form a tortuous pathway, significantly affecting proppant migration. However, many rough models are very small in size, and some have only one rough surface. Thus, it is inadequate to display proppant transport behaviors and placement laws.This study proposed a novel method to develop large-scale rough panels reproduced from actual hydraulic fractures. A large transparent slot (2×0.3 m) was successfully constructed to simulate a shear fracture with 5 mm relative displacement of two matched surfaces. Six kinds of proppants were selected to study the effects of particle density and size. Four types of slickwater were prepared to achieve viscous diversity. A high-resolution particle image velocimetry (PIV) system detected the instantaneous velocity and vector fields in the rough pathway to understand particle transport behaviors. The specific parametric study includes a quantitative analysis of the proppant bed profile, equilibrium height, coverage area, injection pressure, and volumes of proppant settled in the slot and outlet tank. Also, five tests are carried out in the smooth slot, which has the same size as the rough slot.The test results demonstrate that the narrow rough fracture would significantly hinder particle transport, especially in the horizontal direction. The proppant bed is higher and closer to the inlet than that in the smooth model. Particles mixed with highly viscous slickwater easily aggregate in the two-sided rough model and gradually form finger-like regions at the lower part of the inlet. The unstable flow and vortices can disperse aggregated particles and avoid particle clogging. Proppants injected at the high volume fraction are prone to settle quickly and build up a higher bed contact with the inlet, leading to more considerable injection pressure. Perforation blockage often occurred in the rough model, and the near-wellbore screenout was induced as the bed blocked all perforations. Enhancing the fluid carrying capacity and using smaller proppant help avoid perforation blockage and improve far-field fracture conductivity. Two correlations were developed to predict the equilibrium height and coverage area of the proppant bed. The experimental results and laws provide novel understandings that can help optimize hydraulic fracturing design and treatment by rationally selecting proppant and fracturing fluid to improve the productivity in tight reservoirs.
Summary: Hydraulic fracturing is recognized as the primary stimulating technique to enhance recovery in unconventional reservoirs. Connecting natural fractures and filling proppant are crucial elements to achieve the effective development of the reservoirs. Many studies have investigated the interaction characteristics between hydraulic fracture and natural fracture and proppant transport in complex fracture systems. However, few studies show how natural fracture affects proppant migration and placement. In this work, we experimentally explore proppant transport in an irregular, nonplanar fracture containing hydraulic fractures and a natural fracture. The objective is to identify the influence of natural fractures on proppant transport and placement. In this paper, proppant transport in a nonplanar fracture with bends is studied experimentally by a laboratory size slot, and the bending section represents a natural fracture. A high-resolution particle image velocimetry (PIV) system is used to detect the instantaneous velocity field in the complex pathway to understand particle transport behaviors. Proppant placement is quantitatively evaluated by the proppant coverage area as the proppant bed reaches the equilibrium state. Also, the effects of natural fracture width and height, intersection angle with hydraulic fracture, and relative location with the inlet on proppant placement are investigated. The results identify that the natural fracture would significantly increase the complexity of proppant transport and lead to a discontinuous and irregular proppant bed in the complex fracture. The vorticity flow appears around the bend and resuspends deposited proppants through the bending section. The small natural fracture width and height increase flow erosion and are not conducive to proppant settlement, resulting in no proppant. The more the bending angle, the lower the coverage area and bed height. When the natural fracture is close to the inlet, a depleted region without proppants would be formed around the wellbore. The multiple linear regression method developed two reliable models expressed by four normalized parameters to predict the bed coverage areas. The experimental results and laws provide ways to quantitatively analyze natural fracture characteristics' effect on proppant transport and placement in unconventional reservoirs and fissured formations.