Freeform optics offers more degrees of freedom to optical design that can benefit from a compact package size and a large field of view for imaging systems. Motivated by the advances in modern optical fabrication and metrology, freeform optics has been found in many applications. In this paper, we will describe the challenging optical design, fabrication, metrology, and assembly of an all-aluminum unobscured two-mirror freeform imaging telescope. The telescope has a large field of view of . The freeform aluminum mirrors are manufactured by diamond turning based on a feedback modification strategy. The freeform mirrors are measured by a computer-generated hologram-based interferometric null test method. All-aluminum configuration has the advantages of being athermal and cost-effective.
A freeform imaging telescope (FIT) can achieve a large field of view, high resolution, light weight, and small volume at the same time. Single-point diamond turning (SPDT) is usually used to fabricate FITs, which is made entirely of aluminum alloy. Compared with a traditional telescope, whose reflector is made of glass and whose structure is aluminum, the coefficient of thermal expansion (CTE) of the structure and reflector of which is non-conforming, the CTE of the structure and reflector in an all-aluminum FIT is identical. Therefore, it was expected to theoretically have athermalization properties. In this paper, an all-aluminum off-axis three-mirror FIT was verified. The opto-mechanical–thermal coupling analysis of the FIT at −20 °C was carried out, including data processing and coordinate transformation. The reflector node deformation data of the global coordinates obtained from the finite-element analysis were converted into XY polynomial coefficients of the local coordinate system in ZEMAX. The results showed that the modulation transfer function (MTF) of the FIT at −20 °C~+40 °C still reached the diffraction limit. Moreover, the MTF of the FIT at −20 °C was 0.291 through a thermal environmental test, which was almost the same as the MTF at 22 °C. These results showed that the all-aluminum FIT could achieve athermalization properties.
The off-axis reflective optical system offers several advantages, including the elimination of central obstruction, zero chromatic aberration, and a compact structure. These features make it highly valuable in the domain of space remote sensing. Freeform surfaces transcend the limitations imposed by rotational symmetry, providing significant design flexibility that is particularly effective for correcting non-rotationally symmetric aberrations present in off-axis systems. In this paper, we propose the averaged seed curve extension (A-SCE) method, which facilitates the direct design of an initial structure for freeform off-axis reflective systems. Both focal and afocal off-axis four-mirror freeform optical systems are designed utilizing the A-SCE method, demonstrating an enhanced capability for initial structure design. The results indicate excellent optical performance while maintaining relatively loose processing and assembly tolerances for both systems, thereby enhancing the facilitation of practical implementation.
Large-aperture space optical systems are important tools for observing our planet and conducting deep-space scientific research. More requirements have been put forward for large-aperture optical systems as the depth and breadth of related applications continue to increase. However, achieving the desired surface accuracy on lightweight materials for large-aperture mirror brings higher demands on relevant processing technologies, which increases the processing difficulty, cycle, and cost of large-aperture optical systems. Therefore, it is necessary to develop a new optical system technique with high tolerance for primary mirror machining errors to significantly reduce its machining accuracy requirements. This paper proposes a new optical system technique which introduces a small-aperture free-form surface into the large-aperture optical system’s post optical path. By combining the freeform correction and its misalignment on the system’s aberrations, the system’s wavefront can be adjusted to correct the wavefront distortion caused by the primary mirror’s machining errors. This reduced the machining accuracy requirements of the large-aperture primary mirror by about one order of magnitude, and high-quality imaging with a low-precision primary mirror is achieved.
The common aperture optical system enhances light utilization efficiency during the imaging process by utilizing a single shared aperture. This approach not only facilitates independent synchronous multi-band imaging across various applications but also reduces the complexity, size, and cost of optical systems. However, conventional common aperture optical systems typically employ inclined plates or prisms for spectral splitting, which can introduce wavefront distortion in the transmission light path, an issue that is particularly problematic in imaging systems with a large field of view. In this work, we propose employing a freeform lens to correct wavefront distortion arising from imperfections within an optical system. We present a design methodology for the freeform lens based on ray tracing techniques. The application of this freeform lens effectively mitigates wavefront distortion in an infrared dual-band composite detection system, resulting in commendable optical performance across both mid-infrared and far-infrared bands.
To meet the demands for heightened detection sensitivity in satellite-based space target detection systems, we introduce an innovative square aperture diaphragm system utilizing freeform surfaces for detecting targets in the visible light spectrum. Characterized by a 40 mm × 40 mm square entrance pupil, a 4° × 4° field of view (FOV), and a 150 mm focal length, this system achieves a spot size of 2 × 2 pixels with 85% energy concentration within 18.4 μm, showcasing exceptional performance. Our design, compared to a circular aperture system of similar specifications, increases the entrance pupil area by 27% while having a smaller volume, resulting in a 0.24 magnitude improvement in the detection of space targets. This advancement significantly enhances our ability to detect fainter space targets with high sensitivity. The findings of this study pave the way for advancements in satellite-based space target detection technology.