Lirong Yao

Dr. Lirong Yao


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YXYong Xia
Yong Xia
LHLifen He
Lifen He
JFJundan Feng
Jundan Feng
SXSijun Xu
Sijun Xu
LYLirong Yao
Lirong Yao
GPGangwei Pan
Gangwei Pan
Nanofiber membrane has high biological protection function because of its good waterproof and moisture permeability properties. However, this membrane usually lacks active antimicrobial properties, limiting the application in reusable bioprotective textiles. Herein, waterborne polyurethane-capped Ag nanoparticles (AgNPs) were synthesized by reducing silver nitrate in water by sodium borohydride in the presence of polyurethane. AgNP-embedded thermoplastic urethane (TPU) nanofiber membrane was prepared by electrospinning a mixed solution of AgNPs and TPU. As-prepared membranes with Ag content of 50–300 mg·kg−1 have an average diameter of 0.75, 0.64, and 0.63 μm and good fiber uniformity. The doping of AgNP-embedded nanomembrane showed increased breaking force probably because of the induced crystallization effect. Test results showed that as-prepared TPU nanofiber membrane with silver content as low as 100 mg·kg−1 showed good washing resistance. The antibacterial rates of E. coli and S. aureus remained 99.99% with 50 times of soaping or chlorine washing. The corresponding waterproof and moisture permeability properties of nanofiber membrane with a thickness of 0.1 mm remained nearly unchanged, i.e., moisture permeability of around 2600 g·m−2 per 24 h and the hydrostatic pressure resistance of around 400 Pa after 50 times of soaping or chlorine washing.

15 July 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JFJundan Feng
Jundan Feng
LFLingling Feng
Lingling Feng
SXSijun Xu
Sijun Xu
CZChunhong Zhu
Chunhong Zhu
GPGangwei Pan
Gangwei Pan
LYLirong Yao
Lirong Yao
Microbiological protection textile materials played an important role in the battle against the epidemic. However, the traditional active antimicrobial treatment of textiles suffers from narrow textile applicability, low chemical stability, and poor washability. Here, a high-strength adhesive nanosilver glue was synthesized by introducing nontoxic water-soluble polyurethane glue as a protectant. The as-prepared nanosilver glue could adhere firmly to the fiber surfaces by forming a flexible polymer film and could encapsulate nanosilver inside the glue. The as-prepared nanosilver had a torispherical structure with diameter of ~22 nm, zeta potential of −42.7 mV, and good dispersibility in water, and it could be stored for one year. Further studies indicated that the nanosilver glue had wide applicability to the main fabric species, such as cotton and polyester fabric, surgical mask, latex paint, and wood paint. The antimicrobial cotton and polyester fabrics were prepared by a simple impregnation–padding–baking process. The corresponding antimicrobial activity was positively correlated with nanosilver content. The treated fabrics (500 mg/kg) exhibited ultrahigh washing resistance (maintained over 99% antibacterial rates for 100 times of standard washing) and wear resistance (99% antibacterial rates for 8000 times of standard wearing), equivalent breathability to untreated fabric, improved mechanical properties, and good flexibility, demonstrating a potential in cleanable and reusable microbiological protection textiles.

21 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
CJChangmei Jiang
Changmei Jiang
YTYuan Tian
Yuan Tian
LWLuolan Wang
Luolan Wang
SZShiyou Zhao
Shiyou Zhao
MHMing Hua
Ming Hua
GPGangwei Pan
Gangwei Pan
Polylactide (PLA) nanofiber membranes with enhanced hydrophilic properties were prepared through electrospinning. As a result of their poor hydrophilic properties, common PLA nanofibers have poor hygroscopicity and separation efficiency when used as oil–water separation materials. In this research, cellulose diacetate (CDA) was used to improve the hydrophilic properties of PLA. The PLA/CDA blends were successfully electrospun to obtain nanofiber membranes with excellent hydrophilic properties and biodegradability. The effects of the additional amount of CDA on the surface morphology, crystalline structure, and hydrophilic properties of the PLA nanofiber membranes were investigated. The water flux of the PLA nanofiber membranes modified with different CDA amounts was also analyzed. The addition of CDA improved the hygroscopicity of the blended PLA membranes; the water contact angle of the PLA/CDA (6/4) fiber membrane was 97.8°, whereas that of the pure PLA fiber membrane was 134.9°. The addition of CDA enhanced hydrophilicity because it tended to decrease the diameter of PLA fibers and thus increased the specific surface area of the membranes. Blending PLA with CDA had no significant effect on the crystalline structure of the PLA fiber membranes. However, the tensile properties of the PLA/CDA nanofiber membranes worsened due to the poor compatibility between PLA and CDA. Interestingly, CDA endowed the nanofiber membranes with improved water flux. The water flux of the PLA/CDA (8/2) nanofiber membrane was 28,540.81 L/m2·h, which was considerably higher than that of the pure PLA fiber membrane (387.47 L/m2·h). The PLA/CDA nanofiber membranes can be feasibly applied as an environmentally friendly oil–water separation material because of their improved hydrophilic properties and excellent biodegradability.

21 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
YXYong Xia
Yong Xia
NZNan Zhu
Nan Zhu
ZYZhao Ying
Zhao Ying
JZJiehui Zhu
Jiehui Zhu
HCHuajie Chen
Huajie Chen
LYLirong Yao
Lirong Yao
The superhydrophobic surface can be prepared by two methods; one is by reducing the surface energy, and the other is by constructing a micro-nano rough structure. To achieve high superhydrophobic performance in terms of durability, the firm combination of hydrophobic coating and substrate is particularly important. Here, we use polydimethylsiloxane (PDMS) as a low surface energy monomer, water-borne polyurethane (WPU) as a dispersing aid, and use high-power ultrasound to disperse PDMS in water to make emulsion. The polyester matrix is etched by atmospheric plasma, dipped in PDMS emulsion, dried, and finally baked to induce PDMS on the surface of polyester fiber to cross-link into film. A series of tests on the self-cleaning polyester fabric prepared by this method show that when the concentration of PDMS is 8 g/L and the mass ratio of PDMS to WPU is 20:1, the water contact angle (WCA) reaches the maximum value of 148.2°, which decreases to 141.5° after 200 times of washing and 138.6° after 5000 times of rubbing. Before and after PDMS coating, the tensile strength of polyester fabric increases from 489.4 N to 536.4 N, and the water vapor transmission decreases from 13,535.7 g/(m2·d) to 12,224.3 g/(m2·d). This research is helpful to the large-scale production of self-cleaning polyester fabric. In the future, on the basis of this research, we will add functional powder to endow self-cleaning polyester fabric with higher hydrophobicity and other properties.

10 March 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
LGLiheng Gao
Liheng Gao
JFJundan Feng
Jundan Feng
SXSijun Xu
Sijun Xu
MSMin Shi
Min Shi
LYLirong Yao
Lirong Yao
ZYZhongtian Yang
Zhongtian Yang
Current metal nanomaterials for developing nanofunctional textiles are mostly based on metal nanoparticles (NPs) that show aqueous instability, a tendency to aggregate, and low chemical affinity to biomass textiles, leading to low nano-metal uptake during finishing, significant declines in function, and nano-pollution. Herein, we demonstrate a strategy to transform metal (Ag, Au, and Pt) NPs into homogenous hyperbranched poly(amide-amine) (HBPAA)-encapsulated NPs showing high water solubility, oxidative resistance, and affinity to biomass materials upon surface capping with HBPAA. The proposed method represents a universal, simple, clean, and efficient self-assembly technology to produce monolayered Ag–Au–Pt ternary-coated biomass textiles. The combination of Ag, Au, and Pt NPs yields a positive potential of approximately +37.12 mV depending on the metal concentration and could simultaneously self-assemble onto natural fibers, including cotton, silk, and wool, through the one-step impregnation of textiles. Increasing the temperature and concentration of the mixture favors the self-assembly process. A mixture of 30–110 mg/L Ag, Au, and Pt NPs could nearly completely anchor onto cotton, silk, and wool textiles after impregnation at 100 °C for 1 h without chemical assistance, thereby indicating the possibility of clean production. As-prepared functional cotton, silk, and wool possessed similarly high antibacterial activities, and a mixture containing over 1500 mg/g NPs inhibited 99% of the Escherichia coli and Staphylococcus aureus in the sample textiles. The developed coating technology is simple, clean, controllable, and broadly applicable; thus, it could be potentially applied in functional textiles.

17 June 2022 in Coatings
Verified
Journal Article
Open access
PDF file
YXYong Xia
Yong Xia
TYTao Yang
Tao Yang
GPGangwei Pan
Gangwei Pan
SXSijun Xu
Sijun Xu
LYLirong Yao
Lirong Yao
W/Polydopamine (PDA) was prepared by adding W powder into the dopamine (DA) solution and adjusting the pH value of the solution. PDA contains several phenolic hydroxyl and amino groups, which provide abundant active sites for the complexation of metal ions. Therefore, we prepared W/Gd2O3 with core–shell structure by self-assembly method and homogeneous precipitation method, respectively. At the same time, polyurethane (PU) coating fabrics with W and Gd2O3 mixed powder and core–shell W/Gd2O3 powder were prepared, and their X-ray protection performance was tested. Results show that compared with W and Gd2O3 mixed powder PU coating fabrics, the protection efficiency and lead equivalent of core–shell structure W/Gd2O3 powder PU coating fabrics against different energy rays are obviously improved. With the increase in incident energy, the protective efficiency of core–shell structure W/Gd2O3 powder PU coating fabric decreases more slowly than that of W/Gd2O3 mixed powder PU coating fabric. When the incident energy is 65–100 keV, the protective efficiency of the core–shell structure W/Gd2O3 powder PU coating fabric is above 60%, showing a good synergistic protective effect. When the incident energy is 83 keV, the X-ray protection efficiency of core–shell W/Gd2O3 powder PU coating fabric is 65.5%, and the lead equivalent is 0.4051 mmPb.