Due to its highly developed pore structure and large specific surface area, activated carbon is often used as a catalyst or catalyst carrier in catalytic ozonation. Although the pore structure of activated carbon plays a significant role in the treatment of wastewater and the mass transfer of ozone molecules, the effect is complicated and unclear. Because different application scenarios require catalysts with different pore structures, catalysts with appropriate pore structure characteristics should be developed. In this review, we systematically summarized the current adjustment methods for the pore structure of activated carbon, including raw material, carbonization, activation, modification, and loading. Then, based on the brief introduction of the application of activated carbon in catalytic ozonation, the effects of pore structure on catalytic ozonation and mass transfer are reviewed. Furthermore, we proposed that the effect of pore structure is mainly to provide catalytic active sites, promote free radical generation, and reduce mass transfer resistance. Therefore, large external surface area and reasonable pore size distribution are conducive to catalytic ozonation and mass transfer.

Advanced oxidation (e.g., fenton-like reagent oxidation and ozone oxidation) is a highly important technology that uses strong oxidizing free radicals to degrade organic pollutants and mineralize them. The fenton-like reactions have the characteristics of low cost, simple operation, thorough reaction and no secondary pollution. Fenton-like reagents refer to a strong oxidation system composed of transition metal ions (e.g., Fe³⁺, Mn²⁺ and Ag⁺) and oxidants (hydrogen peroxide, potassium persulfate, sodium persulfate, etc). Graphene and carbon nanotube possess a distinctive mechanical strength, flexibility, electrical and thermal conductivity and a very large specific surface area, which can work as an excellent carrier to disperse the catalyst and prevent its agglomeration. Fullerene can synergize with iron-based materials to promote the reaction of hydroxyl groups with organic pollutants and enhance the catalytic effect. Fenton-like catalysts influence the catalytic behavior by inducing electron transfer under strong interactions with the support. Due to the short lifespan of free radicals, the treatment effect is usually enhanced with the assistance of external conditions (ultraviolet and electric fields) to expand the application of fenton-like catalysts in water treatment. There are mainly light-fenton, electro-fenton and photoelectric-fenton methods. Fenton-like catalysts can be prepared by hydrothermal method, impregnation and coordination-precipitation approaches. The structures and properties of the catalysts are characterized by a variety of techniques, such as high-resolution transmission electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption near-edge structure spectroscopy. In this paper, we review the mechanisms, preparation methods, characterizations and applications status of fenton-like reagents in industrial wastewater treatment, and summarize the recycling of these catalysts and describe prospects for their future research directions.

Acetaldehyde is a typical toxic substance of the petrochemical industry. Dissolved organic carbon (DOC) plays an important role in wastewater treatment. Therefore, the molecular weight, hydrophilicity, and chemical composition of DOC in acetaldehyde wastewater were evaluated. First, the molecular weight (MW) distribution was investigated; the results showed that acetaldehyde wastewater was mainly composed of components with a MW less than 1 kDa, and possessed higher proportion of protein-like substances that were dominant contributors to membrane fouling. Then, the distribution of hydrophobicity was evaluated; hydrophobic bases were reported to be slowly biodegradable fractions due to the high humic content. Finally, gas chromatography–mass spectrometry (GC-MS) was utilized to determine chemical composition, and 30 pollutants were detected. Aldehydes, hydrocarbons, ketones, alcohols, furans, phenols, and organic acids were the dominant pollutants. Most of them were moderately toxic compounds. The comprehensive characterization of acetaldehyde wastewater will contribute to control strategies and sustainable development.