A novel copper-zinc-manganese trimetal oxide nanocomposite was synthesized by the simple co-precipitation method for sensing glucose and methylene blue degradation. The absorption maximum was found by ultraviolet–visible spectroscopy (UV-Vis) analysis, and the bandgap was 4.32 eV. The formation of a bond between metal and oxygen was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR) analysis. The average crystallite size was calculated as 17.31 nm by X-ray powder diffraction (XRD) analysis. The morphology was observed as spherical by scanning electron microscope (SEM) and high-resolution transmission electron microscopy (HR-TEM) analysis. The elemental composition was determined by Energy Dispersive X-ray Analysis (EDAX) analysis. The oxidation state of the metals present in the nanocomposites was confirmed by the X-ray photoelectron spectroscopy (XPS) analysis. The hydrodynamic diameter and zeta potential of the nanocomposite were 218 nm and −46.8 eV, respectively. The thermal stability of the nanocomposite was analyzed by thermogravimetry-differential scanning calorimetry (TG-DSC) analysis. The synthesized nanocomposite was evaluated for the electrochemical glucose sensor. The nanocomposite shows 87.47% of degradation ability against methylene blue dye at a 50 µM concentration. The trimetal oxide nanocomposite shows potent activity against Escherichia coli. In addition to that, the prepared nanocomposite shows strong antioxidant application where scavenging activity was observed to be 76.58 ± 0.30, 76.89 ± 0.44, 81.41 ± 30, 82.58 ± 0.32, and 84.36 ± 0.09 % at 31, 62, 125, 250, and 500 µg/mL, respectively. The results confirm the antioxidant potency of nanoparticles (NPs) was concentration dependent.

In this study, photocatalysis was employed to degrade a wastewater pollutant (AB-29 dye) under visible light irradiation. For this purpose, nitrogen (N)- and neodymium (Nd)-doped TiO₂ nanoparticles were prepared using the simple hydrothermal method. X-ray diffraction (XRD) revealed an anatase phase structure of the Nd-N/TiO₂ photocatalyst, whereas properties including the surface morphology, chemical states/electronics structure and optical structure were determined using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–visible (UV–vis.) and photoluminescence (PL) spectroscopies. Photocatalytic testing of the prepared nanomaterials was performed to remove acid blue-29 (AB-29) dye under visible-light exposure. The prepared Nd-N/TiO₂ nanoparticles demonstrated a superior photocatalytic activity and the decolorization efficiency was about 92% after visible-light illumination for 1 h and 20 min, while N/TiO₂, Nd/TiO₂ and TiO₂ only showed a 67%, 43% and 31% decolorization efficiency, respectively. The enhanced photocatalytic activity of the Nd-N/TiO₂ photocatalyst was due to a decrease in the electron/hole’s recombination and the increased absorption of TiO₂ in the visible range. The reusability results showed that the average photocatalytic activity decrease for all the samples was only about 16% after five consecutive cycles, indicating a good stability of the prepared nanomaterials. Moreover, the radical scavenging activity of the prepared nanomaterials was evaluated using the DPPH method. The novel Nd-N/TiO₂ exhibited a higher antioxidant activity compared to all the other samples.

Using sustainable photocatalysts, photocatalytic degradation has emerged as one of the viable strategies to combat water pollution through eco-friendly and cost-effective means. Visible-light-active Ag₃PO₄/Mn-ZnO nanocomposite photocatalysts were produced in this study using a simple hydrothermal method and varied concentrations of Ag₃PO₄ to Mn-ZnO ranging from 0 to 5 wt percent. X-ray diffraction, scanning electron microcopy, energy-dispersive X-ray, transmission electron microscopy, UV–visible spectroscopy, Fourier transform infra-red spectrophotometer, and photoluminescence spectroscopy were used to examine the structural, morphological, and optical properties of synthesized materials. Visible light was used to test the photocatalytic activity of produced Ag₃PO₄/Mn-ZnO photocatalysts for the breakdown of tetracycline (TC) hydrochloride. In comparison to the other samples, the 3% Ag₃PO₄/Mn-ZnO nanocomposite exhibited superior activity as a result of improved visible light absorption and suppressed charge carrier recombination. In addition, this sample demonstrated good stability of TC in an aqueous environment after five consecutive cycles. This research will enhance the scope of photocatalysis for environmental applications.

In recent years, the growing research interests in the applications of plant and fruit extracts (synthetic/stabilization materials for the nanomaterials, medicinal applications, functional foods, and nutraceuticals) have led to the development of new analytical techniques to be utilized for identifying numerous properties of these extracts. One of the main properties essential for the applicability of these plant extracts is the antioxidant capacity (AOC) that is conventionally determined by spectrophotometric techniques. Nowadays, electrochemical methodologies are emerging as alternative tools for quantifying this particular property of the extract. These methodologies address numerous drawbacks of the conventional spectroscopic approach, such as the utilization of expensive and hazardous solvents, extensive sample pre-treatment requirements, long reaction times, low sensitivity, etc. The electrochemical methodologies discussed in this review include cyclic voltammetry (CV), square wave voltammetry (SWV), differential pulse voltammetry (DPV), and chronoamperometry (CAP). This review presents a critical comparison between both the conventional and electrochemical approaches for the quantification of the parameter of AOC and discusses the numerous applications of the obtained bioextracts based on the AOC parameter.

This study was designed to check the potential of secondary metabolites of the selected plants; Citrullus colocynthis, Solanum nigrum, Solanum surattense, Calotropis procera, Agave americana, and Anagallis arvensis for antioxidant, antibacterial, antifungal, and antidiabetic agents. Plant material was soaked in ethanol/methanol to get the crude extract, which was further partitioned via solvent extraction technique. GCMS and FTIR analytical techniques were applied to check the compounds responsible for causing antioxidant, antimicrobial, and antidiabetic activities. It was concluded that about 80% of studied extracts/fractions were active against α-amylase, ranging from 43 to 96%. The highest activity (96.63%) was exhibited by butanol fractions of A. arvensis while the least response (43.65%) was shown by the aqueous fraction of C. colocynthis and the methanol fraction of fruit of S. surattense. The highest antioxidant activity was shown by the ethyl acetate fraction of Anagallis arvensis (78.1%), while aqueous as well as n-hexane fractions are the least active throughout the assay. Results showed that all tested plants can be an excellent source of natural products with potential antimicrobial, antioxidant, and antidiabetic potential. The biological response of these species is depicted as a good therapeutic agent, and, in the future, it can be encapsulated for drug discovery.