Realizing the high-precision monitoring of wheat stripe rust over a large area is of great significance in ensuring the safety of wheat production. Existing studies have mostly focused on the fusion of multi-source data and the construction of key monitoring features to improve the accuracy of disease monitoring, with less consideration for the regional distribution characteristics of the disease. In this study, based on the occurrence and spatial distribution patterns of wheat stripe rust in the experimental area, we constructed a multi-source monitoring feature set, then utilized geographical detectors for feature selection that integrates the spatial-distribution differences of the disease. The research results show that the optimal monitoring feature set selected by the geographical detectors has a higher monitoring accuracy. Based on the Random Forest (RF), eXtreme Gradient Boosting (XGBoost), and Support Vector (SVM) models, the disease monitoring results demonstrate that the monitoring feature set constructed in this study has an overall accuracy in its disease monitoring that is 3.2%, 2.7%, and 4.3% higher, respectively, than that of the ReliefF method, with Kappa coefficient higher by 0.064, 0.044, and 0.087, respectively. Furthermore, the optimal monitoring feature set obtained by the geographical detectors method exhibits a higher stability, and the spatial distribution of wheat stripe rust in the monitoring results generated by the different models demonstrates good consistency. In contrast, the features selected by the ReliefF method exhibit significant spatial-distribution differences in the wheat stripe rust among the different monitoring results, indicating poor stability and consistency. Overall, incorporating information on disease spatial-distribution differences in stripe-rust monitoring can improve the accuracy and stability of disease monitoring, and it can provide data and methodological support for regional stripe-rust detection and accurate preventions.

Grasshoppers can greatly interfere with agriculture and husbandry, and they will breed and grow rapidly in suitable habitats. Therefore, it is necessary to extract the distribution of the grasshopper potential habitat (GPH), analyze the spatial-temporal characteristics of the GPH, and detect the different effects of key environmental factors in the meadow and typical steppe. To achieve the goal, this study took the two steppe types of Xilingol (the Inner Mongolia Autonomous Region of China) as the research object and coupled them with the MaxEnt and multisource remote sensing data to establish a model. First, the environmental factors, including meteorological, vegetation, topographic, and soil factors, that affect the developmental stages of grasshoppers were obtained. Secondly, the GPH associated with meadow and typical steppes from 2018 to 2022 were extracted based on the MaxEnt model. Then, the spatial-temporal characteristics of the GPHs were analyzed. Finally, the effects of the habitat factors in two steppe types were explored. The results demonstrated that the most suitable and moderately suitable areas were distributed mainly in the southern part of the meadow steppe and the eastern and southern parts of the typical steppe. Additionally, most areas in the town of Gaorihan, Honggeergaole, Jirengaole, as well as the border of Wulanhalage and Haoretugaole became more suitable for grasshoppers from 2018 to 2022. This paper also found that the soil temperature in the egg stage, the vegetation type, the soil type, and the precipitation amount in the nymph stage were significant factors both in the meadow and typical steppes. The slope and precipitation in the egg stage played more important roles in the typical steppe, whereas the aspect had a greater contribution to the meadow steppe. These findings can provide a methodical guide for grasshopper control and management and for further ensuring the security of agriculture and husbandry.

The fall armyworm (Spodoptera frugiperda) (J. E. Smith) is a widespread, polyphagous, and highly destructive agricultural pest. Global climate change may facilitate its spread to new suitable areas, thereby increasing threats to host plants. Consequently, predicting the potential suitable distribution for the fall armyworm and its host plants under current and future climate scenarios is crucial for assessing its outbreak risks and formulating control strategies. This study, based on remote sensing assimilation data and plant protection survey data, utilized machine learning methods (RF, CatBoost, XGBoost, LightGBM) to construct potential distribution prediction models for the fall armyworm and its 120 host plants. Hyperparameter methods and stacking ensemble method (SEL) were introduced to optimize the models. The results showed that SEL demonstrated optimal performance in predicting the suitable distribution for the fall armyworm, with an AUC of 0.971 ± 0.012 and a TSS of 0.824 ± 0.047. Additionally, LightGBM and SEL showed optimal performance in predicting the suitable distribution for 47 and 30 host plants, respectively. Overlay analysis suggests that the overlap areas and interaction links between the suitable areas for the fall armyworm and its host plants will generally increase in the future, with the most significant rise under the RCP8.5 climate scenario, indicating that the threat to host plants will further intensify due to climate change. The findings of this study provide data support for planning and implementing global and intercontinental long-term pest management measures aimed at mitigating the impact of the fall armyworm on global food production.

Powdery mildew is one of the most significant rubber tree diseases, with a substantial impact on the yield of natural rubber. This study aims to establish a detection approach that coupled continuous wavelet transform (CWT) and machine learning for the accurate assessment of powdery mildew severity in rubber trees. In this study, hyperspectral reflectance data (350–2500 nm) of healthy and powdery mildew-infected leaves were measured with a spectroradiometer in a laboratory. Subsequently, three types of wavelet features (WFs) were extracted using CWT. They were as follows: WFs dimensionally reduced by the principal component analysis (PCA) of significant wavelet energy coefficients (PCA-WFs); WFs extracted from the top 1% of the determination coefficient between wavelet energy coefficients and the powdery mildew disease class (1%R²-WFs); and all WFs at a single decomposition scale (SS-WFs). To assess the detection capability of the WFs, the three types of WFs were input into the random forest (RF), support vector machine (SVM), and back propagation neural network (BPNN), respectively. As a control, 13 optimal traditional spectral features (SFs) were extracted and combined with the same classification methods. The results revealed that the WF-based models all performed well and outperformed those based on SFs. The models constructed based on PCA-WFs had a higher accuracy and more stable performance than other models. The model combined PCA-WFs with RF exhibited the optimal performance among all models, with an overall accuracy (OA) of 92.0% and a kappa coefficient of 0.90. This study demonstrates the feasibility of combining CWT with machine learning in rubber tree powdery mildew detection.

Powdery mildew significantly impacts the yield of natural rubber by being one of the predominant diseases that affect rubber trees. Accurate, non-destructive recognition of powdery mildew in the early stage is essential for the cultivation management of rubber trees. The objective of this study is to establish a technique for the early detection of powdery mildew in rubber trees by combining spectral and physicochemical parameter features. At three field experiment sites and in the laboratory, a spectroradiometer and a hand-held optical leaf-clip meter were utilized, respectively, to measure the hyperspectral reflectance data (350–2500 nm) and physicochemical parameter data of both healthy and early-stage powdery-mildew-infected leaves. Initially, vegetation indices were extracted from hyperspectral reflectance data, and wavelet energy coefficients were obtained through continuous wavelet transform (CWT). Subsequently, significant vegetation indices (VIs) were selected using the ReliefF algorithm, and the optimal wavelengths (OWs) were chosen via competitive adaptive reweighted sampling. Principal component analysis was used for the dimensionality reduction of significant wavelet energy coefficients, resulting in wavelet features (WFs). To evaluate the detection capability of the aforementioned features, the three spectral features extracted above, along with their combinations with physicochemical parameter features (PFs) (VIs + PFs, OWs + PFs, WFs + PFs), were used to construct six classes of features. In turn, these features were input into support vector machine (SVM), random forest (RF), and logistic regression (LR), respectively, to build early detection models for powdery mildew in rubber trees. The results revealed that models based on WFs perform well, markedly outperforming those constructed using VIs and OWs as inputs. Moreover, models incorporating combined features surpass those relying on single features, with an overall accuracy (OA) improvement of over 1.9% and an increase in F1-Score of over 0.012. The model that combines WFs and PFs shows superior performance over all the other models, achieving OAs of 94.3%, 90.6%, and 93.4%, and F1-Scores of 0.952, 0.917, and 0.941 on SVM, RF, and LR, respectively. Compared to using WFs alone, the OAs improved by 1.9%, 2.8%, and 1.9%, and the F1-Scores increased by 0.017, 0.017, and 0.016, respectively. This study showcases the viability of early detection of powdery mildew in rubber trees.

Grasshoppers have profound effects on both grassland ecosystems and livestock production. Despite commendable efforts made by China in grasshopper control, completely eradicating or preventing them still remains a distant prospect. This study aims to analyze the ecological distribution and patterns of grasshopper occurrences in order to provide more accurate monitoring techniques and preventive measures. By considering four types of environmental determinants—meteorology, vegetation, soil, and topography—we systematically identified 18 key influencing factors. These factors encompass various developmental stages of grasshoppers, including variables such as temperature, precipitation, vegetation coverage, vegetation type, soil moisture, soil salinity, soil type, and terrain characteristics. The MaxEnt model is employed in this study to comprehensively capture complex ecological interactions. Omission curves, Receiver Operating Characteristic curves (ROC curves), and the Area Under the Curve (AUC values) demonstrate the robustness and high accuracy of the MaxEnt model. Our research results indicate that meteorological factors are the primary influencing factors for the distribution of grasshoppers, surpassing the effects of vegetation, soil, and terrain. Precipitation and vegetation type emerge as key factors shaping their distributional patterns. Integrating the Sen-MK trend method, our findings identify the epicenter of damage primarily within the central, southern, and northeastern regions, notably affecting locales such as New Barag East County and the Ewenki Autonomous Banner. While their impact in 2012 was particularly severe, temporal trends indicate a decreasing risk of grasshoppers in specific regions, with escalated activity observed in other areas. The empirical insights from this study lay a solid foundation for the development of monitoring and control strategies concerning grasshoppers. Furthermore, the derived theoretical framework serves as a valuable foundation for future research endeavors addressing grasshopper infestations.