Ground-based synthetic aperture radar (GB-SAR) is a highly effective technique that is widely used in landslide and bridge deformation monitoring. GB-SAR based on multiple input multiple output (MIMO) technology can achieve high accuracy and real-time detection performance. In this paper, a novel method is proposed to design transmitting and receiving array elements, which increases the minimum spacing of the antenna by sacrificing several equivalent phase centers. In MIMO arrays, the minimum antenna spacing in the azimuth direction is doubled, which increases the variety of antenna options for this design. To improve the accuracy of the system, a new method is proposed to estimate channel phase errors, amplitude errors, and position errors. The position error is decomposed into three directions with one compensated by the phase error and two estimated by the strong point. Finally, we validate the accuracy of the system and our error estimation method through simulations and experiments. The results prove that the GB-SAR system performs well in bridge deformation and vibration monitoring with the proposed method.

Ground-Based Synthetic Aperture Radar (GB-SAR), due to its high precision, high resolution, and real-time capabilities, is widely used in the detection of slope deformations. However, the weak scattering coefficient in low-coherence areas poses a great challenge to the observation point selection accuracy. This paper introduces a selection process for reliable observation points that integrates phase and spatial information. First, for various observation points with differentiated stability, we propose to utilize maximum likelihood estimation (MLE) methods to achieve stability assessment. Second, a phase correction approach is proposed to address unwrapped phase errors encountered at less stable points. Third, adaptive filtering for deformation information at observation points is achieved using estimated variance combined with wavelet filtering thresholds. Finally, in dealing with unknown deformation trends, we propose utilizing a clustering method to accurately identify these trends, thereby enhancing the precision in identifying reliable observation points (ROPs). The experimental results demonstrate that this method enhances the accuracy of observation point selection in low-coherence areas, providing a broader observational field for deformation detection.

This paper proposes a configuration for a multiple input multiple output (MIMO) along-track Interferometry (ATI) synthetic aperture radar (SAR) satellite system designed for measuring ocean surface velocity vectors. The satellite system consists of a main satellite and at least two slave satellites. The main satellite is equipped with dual antennas for transmitting and receiving echoes, while the slave satellites are equipped with single antennas for receiving echoes. Based on the configuration, we explore key issues related to MIMO ATI SAR for measuring ocean surface velocity vectors to form a comprehensive solution. The issues include the current measurement principle, methods for assessing velocity vector accuracy, optimal baseline determination, carrier frequency selection, echo separation methods, and sources of phase error. The corresponding methods are derived in this paper to address the challenges posed by the geometry of bistatic observations in beam steering and digital beamforming (DBF) processing. Additionally, a system parameter design method based on optimizing ocean surface velocity measurement accuracy is proposed, eliminating the need for repeated trade-offs on individual parameters. Finally, the paper presents an example of a high-precision wide-swath ocean surface velocity vector measurement system based on the configuration. This system achieves an ocean surface velocity accuracy of 3 cm/s, a swath coverage of 200 km, and a product resolution of 1×1 km² in wind speeds above 3 m/s.

Polarimetric Synthetic Aperture Radar (PolSAR) data is inherently characterized by speckle noise, which significantly deteriorates certain aspects of the quality of the PolSAR data processing, including the polarimetric decomposition and target interpretation. With the rapid increase in PolSAR resolution, SAR images in complex natural and artificial scenes exhibit non-homogeneous characteristics, which creates an urgent demand for high-resolution PolSAR filters. To address these issues, a new adaptive PolSAR filter based on joint similarity measure criterion (JSMC) is proposed in this paper. Firstly, a scale-adaptive filtering window is established in order to preserve the texture structure based on a multi-directional ratio edge detector. Secondly, the JSMC is proposed in order to accurately select homogeneous pixels; it describes pixel similarity based on both space distance and polarimetric distance. Thirdly, the homogeneous pixels are filtered based on statistical averaging. Finally, the airborne and spaceborne real data experiment results validate the effectiveness of our proposed method. Compared with other filters, the filter proposed in this paper provides a better outcome for PolSAR data in speckle suppression, edge texture, and the preservation of polarimetric properties.