Globally, the demand for materials with high ultrafast charge rates yet slow discharge continues to rise which has resulted in extensive research into supercapacitors. Although the current supercapacitors can meet such demands, the high processing cost coupled with the use of toxic chemicals remains a major concern. In this study, porous graphene oxide (GO) with a unique morphology was synthesized by an improved Tour’s method for supercapacitor application using coconut shells as a precursor. The structure of the synthesized material consists of partially graphitized walls of porous GO. The surface morphology, the defects created in the GO, and the specific surface area of the as-synthesized materials were studied. When evaluated as an electrode material for supercapacitors, a specific capacitance of 173 F/g at 0.5 A/g in 0.5 M Na2SO4 and 139 F/g at 0.5 A/g in 2 M KOH was recorded. Moreover, a high capacitance retention of 99.3% was recorded after 1000 cycles, confirming the good cyclic stability of the synthesized electrode material. The good electrochemical performance can be attributed to the electrode material’s intrinsic structural and compositional superiorities. These findings indicate the potential of using coconut shells as a precursor for the synthesis of high-performance graphene-based supercapacitor electrodes with improved cost-effectiveness and reduced environmental impact.
This study investigates the processing of shea nut shells (SNSs), an abundant agricultural waste, into porous activated carbon for supercapacitor electrodes through a two-stage thermal treatment involving pyrolysis and physical activation with CO2 and steam. The aim was to develop sustainable, high-performance electrode materials while addressing waste management. Carbonization followed by activation yielded 16.5% (CO2) and 11.3% (steam) activation yields, with total yields of 4.3% and 2.9%, respectively. CO2 activation produced carbon (AC_CO2) with a specific surface area (SBET) of 1528 m2 g−1 and a total pore volume of 0.72 cm3 g−1, a graphitization degree (ID/IG = 1.0), and low charge transfer resistance (9.05 Ω), delivering a specific capacitance of 47.5 F g−1 at 0.5 A g−1, an energy density of 9.5 Wh kg−1 at 299 W kg−1, and a fast discharge time of 2.10 s, ideal for power-intensive applications. Steam activation yielded carbon (AC_H2O) with a higher specific surface area (1842 m2 g−1) and pore volume (1.57 cm3 g−1), achieving a superior specific capacitance of 102.2 F g−1 at 0.5 A g−1 and a power density of 204 W kg−1 at 9.2 Wh kg−1, suited for energy storage. AC_CO2 also exhibited exceptional cyclic stability (90% retention after 10,000 cycles). These findings demonstrate SNS-derived activated carbon as a versatile, eco-friendly material, with CO2 activation optimizing power delivery and steam activation enhancing energy capacity, offering tailored solutions for supercapacitor applications and sustainable waste utilization.
Green synthesis of biomass precursor into GO and rGO was achieved using hydrothermal carbonization. The synthesized material exhibited an enhanced specific capacitance of 552.48 F g −1 at 1 A g −1 with high redox activity.