Geophysical methods are widely used as noninvasive tools for archaeological prospection. In a first step is usually applied basic prospection of vast areas, when data are evaluated only in qualitative way. Sometimes is performed second step, during which take place more detailed multidimensional or combined surveys in order to image archeological monuments complexly, allowing quantitative interpretation. Hence, we used a unique and novel combination of multidimensional electrical resistivity tomography (ERT) on the Early Middle Ages stronghold fortifications at Vinoř (Czechia) to achieve such interpretation. The joint results of 2D/3D/4D (time-lapse) surveys allowed us to precisely characterize individual construction components of the fortifications, including a ditch and rampart enhanced by a front wall with a berm. The ERT results recovered the fortification dimensions and the volume of building material used. The surveyed fortification section was verified by excavations directly after the ERT measurements. A comparison of the excavated section with geophysics proved that ERT was able to infer all the important fortification characteristics. In addition, illustrative picture of the resistivity manifestations of the basic components of this very typical fortification construction were obtained. The results show that multidimensional ERT provide access to quantitative interpretation allowing to explain archaeological structures behind investigated anomalies. In result, sites containing cultural heritage can be leaved intact, excavations can be substituted in surprisingly large extent, while unprecedented amount of archaeological information is still retrieved.
Architectural energetics is a methodology that translates architectural objects into a quantitative time-labor equivalent, from which information about past societies, labor organizations, or political relations can be inferred. Preceding such study, the volume of every architectural structure must be determined. This is usually done by in situ measurements and computing of volume by mathematical formulae or using UAV-based photogrammetry processed into digital surface model. However, both of these methods are impracticable in the case of buried or semi-buried monuments where the only remaining option is direct excavation. Hence, we introduce a new method for the determination of volumetric information based on the electrical resistivity tomography (ERT) geophysical method. We conducted our study at defensive lines (ramparts/ditches) within two hillforts of different ages, constructed from different building materials, in the Czech Republic. ERT surveys performed in 3D can differentiate ramparts/ditches in detail from the surrounding environment based on resistivity. Compared to previous excavations, the 3D inversion results show that ERT can obtain meaningful volumes based on the chosen resistivity threshold. The best results were achieved on homogeneous semi-buried ramparts and the ditch. ERT can be performed at a fraction of the cost of direct excavation. This method also leaves an intact site for future generations.
The rich mining history of the Ore Mountains led to the development of many unique mining landscapes, today recognised as a UNESCO World Heritage Site. Underground mines, which have often been disused for hundreds of years, are often an interesting target for mining archaeology. The exact location of many of these historic mines is today uncertain or even completely unknown, making excavation and further investigation a challenge. In one of the tin mining districts in the village of Hřebečná, we have identified location of several shallow mines, using a range of near-surface geophysical methods, the evaluation of historical sources, and terrain analysis. We have used microgravity survey in combination with electrical resistivity tomography and ground penetrating radar. We describe the entire process from the planning phase, including the evaluation of prior historical and geological knowledge, through to processing of observed field data. Then we discuss the general capabilities of each geophysical method for the detection of underground mines. We have found promising indications at three investigated locations, using mainly the microgravity method. We were able to interpret these indications and present the most probable location of the target underground mines.