In the context of global advancements, the imperative of a sustainable energy supply looms large. Biomass, an adaptable and renewable resource, has garnered attention for its potential contributions, although economic uncertainties persist due to the intricate web of processing pathways. In response, the biorefinery concept emerges as a structured strategy to optimize the processing of microalgae and municipal solid waste (MSW), capitalizing on their multifaceted potential to yield diverse end-products. This review underscores the critical significance of a cohesive biorefinery paradigm that unites the processing of microalgae and MSW, unveiling their capacity to generate a spectrum of high-value products. The utilization of mixed-integer linear programming paves the way for an optimal biorefinery model that navigates through complex decisions. Challenges encompass the array of diverse feedstocks and the preliminary nature of data availability. The overarching goal of this research is to discern optimal pathways for the conversion of MSW and microalgae into energy and valuable products, with a focus on enhancing waste utilization and augmenting the energy supply. In the broader landscape, this comprehensive review advances strategies for sustainable energy generation and waste management, invigorating innovative approaches to shape future progress. By illuminating pathways towards maximizing the potential of biomass resources, this review contributes to the ongoing discourse on sustainable energy and waste utilization.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
Spent caustic is a waste generated by petrochemical refineries, which used to eliminate acid components such as hydrogen sulphide (H2S) and mercaptans from the refined product streams. A study was carried out on simulation and optimization of spent caustic wastewater treatment system by using Aspen Plus based on wet air oxidation (WAO) method. WAO method uses air under elevated temperature and pressure to carry out oxidation in the aqueous phase. Process flow diagram (PFD) of WAO method was drawn and relevant input data was keyed in Aspen Plus according to experimental results on WAO. Both results were validated and the results were match each another as the percentage of allowable error between both the results were less than 5 %. After that, optimization was carried out to determine the optimum ratio of spent caustic feed flow rate to air flow rate and operating temperature of the flash separator unit involved in the process. From the optimization results, it can come to a conclusion that 1: 9.2 is the minimum spent caustic feed flow rate to air flow rate ratio and optimum operating temperature of flash separator unit is 140°C in order for maximum flow rate of CH3SSCH3 in offgas stream in this simulation model of spent caustic wastewater treatment system using WAO method.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
The demanding uses of fossil fuels and their associated environmental footprints are driving researches into renewable energy productions from organic resources and waste. Anaerobic digestion (AD) is an environment-friendly and cost-effective method to produce biogas from biomass. This biogas can be used in power generation, heating systems and in a combined heat and power (CHP) system. Nevertheless, biogas produced from AD contains a big fraction of CO2 and less methane purity. Aspen Plus simulation model was developed for the AD process to produce biogas, highlighting the economical potentials and environmental benefits. Four steps of AD including hydrolysis, acidogenesis, acetogenesis, and methanogenesis with eight reactions were simulated based on the respective stoichiometries. Optimization has involved the search to identify optimum feed flow rate and operating pressure to produce the maximum amount of pure methane. The obtained results showed that optimum feed rate was 0.36 l/day and operating pressure of 3 bar with hydrogen flow of 180 l/day. By using these optimum conditions, maximum amount of methane with high purity was achieved. Otherwise, through biomass natural decomposition, the methane would escape to the atmosphere as one of those significant greenhouse gases.
10 May 2019 in IOP Conference Series: Earth and Environmental Science
High energy demand and energy availability lead to the increasing of unpleasant energy situation. It is exacerbated if fossil fuels are the only energy source as it contributes to climate change and global warming. Thus, governments are focusing on the usage of natural resources as fossil fuel substitution. This study focused on the modelling and optimization of biomass-based cogeneration plant. The objective was to model, simulate and optimize the cogeneration plant which used torrefied EFB pellet as fuel in Aspen Plus simulator. Firstly, suitable biomass resources in Malaysia was identified. Next, a typical process flow diagram of cogeneration from the published literature was referred. Then, parametric and structural optimization were conducted. From the simulation, 1.764 MW of power was generated and it was observed that pellet flow rate, water flow rate, air flow rate and boiler temperature influenced the power generated. Five options with different structural designs were formulated in GAMS. It was found that the plant should focused on producing power and medium pressure steam to optimize the profit. The findings concluded that biomass-based cogeneration plant was technically feasible to be deployed. However, further refinements in the optimization aspect should be developed to obtain a more accurate optimal results.
In Malaysia, palm oil industries have played significant roles in the economic sectors and the nation’s developments. One aspect of these industries that is gaining growing interest is oil palm residue management and bio-based product generations. EFB has been identified to be a feasible raw material for the production of bio-energy, bio-chemicals, and bio-materials. In this paper, our previous deterministic mathematical programming model was extended to include decisions for selecting optimal transportation modes and processes at each level of the processing stage in the supply chain. The superstructure of alternatives was extended to show states of produced products whether solid, liquid, or gaseous, and for which truck, train, barge, or pipeline would be possible modes of transportation. The objective function was to maximize profit which accounts for associated costs including the emission treatment costs from production and transportation. The optimal profit was USD 1,561,106,613 per year for single ownership of all facilities in the supply chain.
Biomass-based pyrolysis is raising a growing interest nowadays because it can alleviate the pollution of biomass wastes and provide a supply of bio-energy, bio-