Lake volume variation is closely related to climate change and human activities, which can be monitored by multi-source remote-sensing data from space. Although there are usually two routine ways to construct the lake volume by the digital elevation model (DEM) or satellite altimetric data combined with the lake area, rarely has a comparison been made between the two methods. Therefore, we conducted a comparison between the two methods in Texas for 14 lakes with abundant validation data. First, we constructed the lake hypsometric curve by five commonly applied DEMs (SRTM, ASTER, ALOS, GMTED2010, and NED) or satellite altimetric products combined with the gauge lake area. Second, the lake volume was estimated by combining the hypsometric curve with the gauge lake area time series. Finally, the estimation error has been quantitatively calculated. The results show that the relative lake volume estimation error (rVSD) of the altimetric data (4%) is only 10–18% of that of the DEMs (22–41%), and the DEM with the highest resolution (NED) has the least rVSD with an average of 22%. Therefore, for large-scale lake monitoring, we suggest the application of satellite altimetric data with the lake area to estimate the lake volume of large lakes, and the application of high-resolution DEM with the lake area to calculate the lake volume of small lakes that are gapped by satellite altimetric data.
This paper proposes a non-cooperative unmanned aerial vehicle (UAV) signal detection strategy based on a multichannel control signal with an energy detector (ED), wherein the sampling point of the control signal on each subchannel is adjusted with environmental signal-to-noise (SNR) in a semi-adaptive manner. In order to estimate the SNR in the environment, not only is a convolutional neural network (CNN) applied in the proposed signal detection strategy, but a long shor-term memory network (LSTM) network is also included; in terms of features, it combines deep features and time-dimension features. The numbers of layers of the CNN and LSTM impact the performance of the algorithm. The decision on the presence or absence of a control signal is made at the fusion center (FC) based on the majority voting rule. This paper shows that the network with a two-layer CNN and a two-layer LSTM can achieve high estimation accuracy of environmental SNR. Simultaneously, the detection accuracy is improved by about 1 dB compared with the classical multichannel detection schemes.
Owing to the notable advantages over range, resolution and accuracy, satellite-borne high-resolution 3D imaging lidar has found widespread applications in aerospace reconnaissance, deep-space detection, earth observation, disaster evaluation, and so on. Based on the principle of 3D laser imaging, the typical satellite-borne high-resolution 3D active imaging lidar systems are reviewed and the development trend is analyzed. Some conclusions can be drawn that operating mechanism of direct detection would be transferred to coherent detection and diode-pumped solid state laser would be transferred to fiber laser. In addition, advanced synthetic aperture and array detection technology should be adopted for higher range resolution.