We use resolvent analysis to develop a physics-based, open-loop, unsteady control strategy to attenuate pressure fluctuations in turbulent flow over a rectangular cavity with a length-to-depth ratio of $6$ at a Mach number of $1.4$ and a Reynolds number based on cavity depth of $10\,000$ . Large-eddy simulations (LES) of the baseline uncontrolled flow reveal the dominance of Rossiter modes II and IV that generate high-amplitude unsteadiness via trailing-edge impingement and oblique shock waves that obstruct the free stream. To suppress the oscillations, we introduce three-dimensional unsteady blowing along the cavity leading edge. We leverage resolvent analysis as a linear model with respect to the baseline flow to guide the selections of the optimal spanwise wavenumber and frequency of the unsteady actuation input for a fixed momentum coefficient of 0.02. Instead of choosing the most amplified resolvent forcing modes, we seek a disturbance that yields sustained amplification of the primary response mode-based kinetic energy distribution over the entire cavity length. This necessary but not sufficient guideline for effective mean flow modification is evaluated using LES of the controlled cavity flows. The most effective control case reduces the pressure root mean square level up to $52\,\%$ along cavity walls relative to the baseline and is approximately twice that achievable by comparable steady blowing. Dynamic mode decomposition on the controlled flows confirms that the optimal actuation input indeed suppresses the formation of the large-scale Rossiter modes. It is expected that the present flow control guideline derived from resolvent analysis will also be applicable at higher Reynolds numbers with the aid of physical insights and further validation.
Adaptive control of flow separation based on online dynamic mode decomposition (DMD) is formulated and implemented on a canonical separated laminar boundary layer via a pulse-modulated zero-net mass-flux jet actuator located just upstream of separation. Using a linear array of thirteen flush-mounted microphones, dynamical characteristics of the separated flow subjected to forcing are extracted by online DMD. This method provides updates of the modal characteristics of the separated flow while forcing is applied at a rate commensurate with the characteristic time scales of the flow. In particular, online DMD provides a time-varying linear estimate of the nonlinear evolution of the controlled flow without any prior knowledge. Using this adaptive model, feedback control is then implemented in which the linear quadratic regulator gains are computed recursively. This physics-based, autonomous approach results in more efficient flow reattachment compared with commensurate open-loop control. Four Reynolds numbers are tested to assess robustness, . All controlled cases exhibit a significant reduction in mean separation bubble height, requiring approximately 10 characteristic time periods to establish control.
Trailing vortices are generated in aeronautical and maritime applications and produce a variety of adverse effects that remain difficult to control. A stability analysis can direct flow control designers towards pertinent frequencies, wavelengths and locations that may lead to the excitation of instabilities, resulting in the eventual breakup of the vortex. Most models for trailing vortices, however, are far-field models, making implementation of the findings from stability analyses challenging. As such, we perform a stability analysis in the formative region where the numerically computed base flow contains both a two-dimensional wake and a tip vortex generated from a NACA0012 at a $5^{\circ }$ angle of attack and a chord-based Reynolds number of $Re_{c}=1000$ . The parallel temporal and spatial analyses show that at three chord lengths downstream of the trailing edge, seven unstable modes are present: three stemming from the temporal analysis and four arising in the spatial analysis. The three temporal instabilities are analogues to three unstable modes in the spatial analysis, with the wake instability dominating in both analyses. The helical mode localized to the vortex co-rotates with the base flow, which is converse with the counter-rotating $m=-1$ instabilities of a Batchelor vortex model, which may be a result of the formative nature of the base-flow vortex. The fourth spatial mode is localized to the tip vortex region. The continuous part of the spectrum contains oscillatory and wavepacket solutions prompting the utilization of a wavepacket analysis to analyse the flow field and group velocity. The structure and details of the full bi-global spectrum will help navigate the design space of effective control strategies to hasten decay of persistent wingtip vortices.
Designing effective control for complex three-dimensional flow fields proves to be non-trivial. Often, intuitive control strategies lead to suboptimal control. To navigate the control space, we use a linear parabolized stability analysis to guide the design of a control scheme for a trailing vortex flow field aft of a NACA0012 half-wing at an angle of attack $\unicode[STIX]{x1D6FC}=5^{\circ }$ and a chord-based Reynolds number $Re=1000$ . The stability results show that the unstable mode with the smallest growth rate (fifth wake mode) provides a pathway to excite a vortex instability, whereas the principal unstable mode does not. Inspired by this finding, we perform direct numerical simulations that excite each mode with body forces matching the shape function from the stability analysis. Relative to the uncontrolled case, the controlled flows show increased attenuation of circulation and peak streamwise vorticity, with the fifth-mode-based control set-up outperforming the principal-mode-based set-up. From these results, we conclude that a rudimentary linear stability analysis can provide key insights into the underlying physics and help engineers design effective physics-based flow control strategies.