Owing to the inherent safety, environmental friendliness, and high theoretical capacity (820 mAh g−1) of zinc metal, aqueous zinc-ion batteries (AZIBs) have emerged as up-and-coming alternatives to organic lithium-ion batteries. However, the insufficient electrochemically active sites, poor structural stability, and severe interfacial side reactions of cathode materials have always been key challenges, restricting battery gravimetric energy density and cycling stability. This article systematically reviews current mainstream AZIB cathode material systems, encompassing layered manganese- and vanadium-based metal oxides, Prussian blue analogs, and emerging organic polymers. It focuses on analyzing the energy storage mechanisms of different material systems and their structural evolution during Zn2+ (de)intercalation. Furthermore, mechanisms of innovative strategies for improving cathodes are thoroughly examined here, such as nanostructure engineering, lattice doping control, and surface coating modification, to address common issues like structural degradation, manganese/vanadium dissolution, and interface passivation. Finally, this article proposes future research directions: utilizing multi-scale in situ characterization to elucidate actual reaction pathways, constructing artificial interface layers to suppress side reactions, and optimizing full-cell design. This review provides a new perspective for developing practical AZIBs with high specific energy and long lifespans.
As a typical two-dimensional layered metal sulfide, MoS2 has a high theoretical capacity and large layer spacing, which is beneficial for ion transport. Herein, a facile polymerization method is employed to synthesize polypyrrole (PPy) nanotubes, followed by a hydrothermal method to obtain flower-rod-shaped MoS2/PPy (FR-MoS2/PPy) composites. The FR-MoS2/PPy achieves outstanding electrochemical performance as a sodium-ion battery anode. After 60 cycles under 100 mA g−1, the FR-MoS2/PPy can maintain a capacity of 431.9 mAh g−1. As for rate performance, when the current densities range from 0.1 to 2 A g−1, the capacities only reduce from 489.7 to 363.2 mAh g−1. The excellent performance comes from a high specific surface area provided by the unique structure and the synergistic effect between the components. Additionally, the introduction of conductive PPy improves the conductivity of the material and the internal hollow structure relieves the volume expansion. In addition, kinetic calculations show that the composite material has a high sodium-ion transmission rate, and the external pseudocapacitance behavior can also significantly improve its electrochemical performance. This method provides a new idea for the development of advanced high-capacity anode materials for sodium-ion batteries.
Metal sulfides are highly promising anode materials for sodium-ion batteries due to their high theoretical capacity and ease of designing morphology and structure. In this study, a metal–organic framework (ZIF-8/67 dodecahedron) was used as a precursor due to its large specific surface area, adjustable pore structure, morphology, composition, and multiple active sites in electrochemical reactions. The ZIF-8/67/GO was synthesized using a water bath method by introducing graphene; the dispersibility of ZIF-8/67 was improved, the conductivity increased, and the volume expansion phenomenon that occurs during the electrochemical deintercalation of sodium was prevented. Furthermore, vulcanization was carried out to obtain ZnS/CoS@C/rGO composite materials, which were tested for their electrochemical properties. The results showed that the ZnS/CoS@C/rGO composite was successfully synthesized, with dodecahedrons dispersed in large graphene layers. It maintained a capacity of 414.8 mAh g−1 after cycling at a current density of 200 mA g−1 for 70 times, exhibiting stable rate performance with a reversible capacity of 308.0 mAh g−1 at a high current of 2 A g−1. The excellent rate performance of the composite is attributed to its partial pseudocapacitive contribution. The calculation of the diffusion coefficient of Na+ indicates that the rapid sodium ion migration rate of this composite material is also one of the reasons for its excellent performance. This study highlights the broad application prospects of metal–organic framework-derived metal sulfides as anode materials for sodium-ion batteries.
Covalent organic framework materials (COFs), as a new type of organic porous material, not only have the characteristics of flexible structure, abundant resources, environmental friendliness, etc., but also have the characteristics of a regular structure and uniform pore channels, so they have broad application prospects in secondary batteries. Their functional group structure, type, and number of active sites play a crucial role in the performance of different kinds of batteries. Therefore, this article starts from these aspects, summarizes the application and research progress of the COF anode materials used in lithium-ion batteries, sodium-ion batteries, and potassium-ion batteries in recent years, discusses the energy storage mechanism of COF materials, and expounds the application prospects of COF electrodes in the field of energy storage.