A compositional variety of planetary cores provides insight into their core/mantle evolution and chemistry in the early solar system. To infer core composition from geophysical data, a precise knowledge of elastic properties of core‐forming materials is of prime importance. Here, we measure the sound velocity and density of liquid Fe‐Ni‐S (17 and 30 at% S) and Fe‐Ni‐Si (29 and 38 at% Si) at high pressures and report the effects of pressure and composition on these properties. Our data show that the addition of sulfur to iron substantially reduces the sound velocity of the alloy and the bulk modulus in the conditions of this study, while adding silicon to iron increases its sound velocity but has almost no effect on the bulk modulus. Based on the obtained elastic properties combined with geodesy data, S or Si content in the core is estimated to 4.6 wt% S or 10.5 wt% Si for Mercury, 9.8 wt% S or 18.3 wt% Si for the Moon, and 32.4 wt% S or 30.3 wt% Si for Mars. In these core compositions, differences in sound velocity profiles between an Fe‐Ni‐S and Fe‐Ni‐Si core in Mercury are small, whereas for Mars and the Moon, the differences are substantially larger and could be detected by upcoming seismic sounding missions to those bodies.
3 November 2016 in Journal of Geophysical Research: Solid Earth
Carbon is one of the possible light elements in the cores of the terrestrial planets. The P wave velocity (VP) and density (ρ) are important factors for estimating the chemical composition and physical properties of the core. We simultaneously measured the VP and ρ of Fe‐3.5 wt % C up to 3.4 GPa and 1850 K by using ultrasonic pulse‐echo method and X‐ray absorption methods. The VP of liquid Fe‐3.5 wt % C decreased linearly with increasing temperature at constant pressure. The addition of carbon decreased the VP of liquid Fe by about 2% at 3 GPa and 1700 K and decreased the Fe density by about 2% at 2 GPa and 1700 K. The bulk modulus of liquid Fe‐C and its pressure (P) and temperature (T) effects were precisely determined from directly measured ρ and VP data to be K0,1700 K = 83.9 GPa, dKT/dP = 5.9(2), and dKT/dT = −0.063 GPa/K. The addition of carbon did not affect the isothermal bulk modulus (KT) of liquid Fe, but it decreased the dK/dT of liquid Fe. In the ρ‐VP relationship, VP increases linearly with ρ and can be approximated as VP (m/s) = −6786(506) + 1537(71) × ρ (g/cm3), suggesting that Birch's law is valid for liquid Fe‐C at the present P‐T conditions. Our results imply that at the conditions of the lunar core, the elastic properties of an Fe‐C core are more affected by temperature than those of Fe‐S core.
1 January 2011 in Science and Technology of Welding and Joining
Owing to the good thermal response of an infrared image furnace, the thermal cycle of welds (weld metal or heat affected zone) can be reproduced, while a laser scanning confocal microscope has a suitable light source and optical geometry for observing metal irradiated at high temperatures. The combination of an infrared image furnace and a laser scanning confocal microscope provides a useful tool for determining the microstructural changes in metals at the micrometre scale during the thermal cycle of welding. The technique of using such a combined system is called high temperature laser scanning confocal microscopy. Both macro‐ and microviews expand the understanding of the microstructural formation of welds and are useful in developing microstructure control methods. This is the first part of a report on the application of laser scanning confocal microscopy to observe microstructural changes for various types of steel samples and thermal cycles. The micro‐ or macroviews of different microstructural formations are presented, including the solidification cell, austenite from δ‐ferrite, pearlite, martensite, Widmanstätten ferrite and bainite.
28 December 2015 in Physics and Chemistry of Minerals
Density and thermal expansion coefficient of metals are fundamental characteristics to describe the equation of state. Especially for liquid metals, the reported data for density and thermal expansion coefficient vary in the literature, even at ambient pressure. To determine the density of solid and liquid metals precisely at high temperatures and ambient pressure, we have developed a high-temperature furnace. The densities of solid Sn, Ni, and Fe were determined from the sample image with an uncertainty of 0.11–0.7% in the temperature range of 285–1803 K with increments of 1–10 K. The density of solid Sn decreased linearly with increasing temperature up to 493 K, and then the decrease became drastic until the melting temperature (Tm) was reached. By contrast, for solid Ni and Fe, the densities decreased linearly with increasing temperature up to the Tm (1728 and 1813 K) without any drastic density drop near Tm. This suggests that Ni and Fe do not exhibit the “premelting effect.” The density of liquid Fe was determined with an uncertainty of 0.4–0.7% in the range of 1818–1998 K with temperature increments of 5 K. The obtained thermal expansion coefficient (α) of liquid Fe was well approximated as either a constant value of α = 2.42(1) × 10–4 K–1 or a linear function of temperature (T); α = 1.37(10) × 10–3 – [6.0(6) × 10–7]T [K–1] up to at least 2000 K.