Lívia Ribeiro de Souza

Dr. Lívia Ribeiro de Souza

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2019 in Materials
Verified
Journal Article
Open access
PDF file
ZLZijing Li
Zijing Li
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
CLChrysoula Litina
Chrysoula Litina
Athina MarkakiAthina Markaki
Athina Markaki
Abir Al-TabbaaAbir Al-Tabbaa
Abir Al-Tabbaa
Pursuing long-term self-healing infrastructures has gained popularity in the construction field. Vascular networks have the potential to achieve long-term self-healing in cementitious infrastructures. To avoid further monitoring of non-cementitious tubes, sacrificial material can be used as a way of creating hollow channels. In this research, we report a new method for fabrication of complex 3D internal hollow tunnels using 3D printing of polyvinyl alcohol (PVA). The behaviour of 3D printed PVA structures in cement pastes was investigated using computed-tomography (CT) combined with X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy dispersive spectroscopy (SEM/EDX). Results showed that (i) 1300 min were needed to fully dissolve 1 g of a 3D printed PVA structure, and different pH solutions did not significantly change the PVA dissolving process compared with a neutral environment; (ii) a low water/cement ratio can minimize early stage cracking resulting from PVA expansion; (iii) and PVA-cement interaction products were mainly calcite and a Ca-polymer compound. In conclusion, controlling the PVA expansion by decreasing the water/cement (w/c) ratio provides a promising approach to achieve 3D hollow channels in cement and, therefore, makes it possible to create complex tunnels within self-healing cementitious materials.

15 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
MAMatheus Henrique Pimentel Araújo
Matheus Henrique Pimentel Araújo
GMGabriele Milone
Gabriele Milone
JTJuliana Cristina Tristão
Juliana Cristina Tristão
Abir Al-TabbaaAbir Al-Tabbaa
Abir Al-Tabbaa
Intelligent cementitious materials integrated with carbon nanofibers (CNFs) have the potential to be used as sensors in structural health monitoring (SHM). The difficulty in dispersing CNFs in cement-based matrices, however, limits the sensitivity to deformation (gauge factor) and strength. Here, we synthesise CNF by chemical vapour deposition on the surface of calcium oxide (CaO) and, for the first time, investigate this amphiphilic carbon nanomaterial for self-sensing in mortar. SEM, TEM, TGA, Raman and VSM were used to characterise the produced CNF@CaO. In addition, the electrical resistivity of the mortar, containing different concentrations of CNF with and without CaO, was measured using the four-point probe method. Furthermore, the piezoresistive response of the composite was quantified by means of compressive loading. The synthesised CNF was 5–10 μm long with an average diameter of ~160 nm, containing magnetic nanoparticles inside. Thermal decomposition of the CNF@CaO compound indicated that 26% of the material was composed of CNF; after CaO removal, 84% of the material was composed of CNF. The electrical resistivity of the material drops sharply at concentrations of 2% by weight of CNF and this drop is even more pronounced for samples with 1.2% by weight of washed CaO. This indicates a better dispersion of the material when the CaO is removed. The sensitivity to deformation of the sample with 1.2% by weight of CNF@CaO was quantified as a gauge factor (GF) of 1552, while all other samples showed a GF below 100. Its FCR amplitude can vary inversely up to 8% by means of cyclic compressive loading. The method proposed in this study provides versatility for the fabrication of carbon nanofibers on a tailored substrate to promote self-sensing in cementitious materials.

2 April 2016 in Journal of Soils and Sediments
Verified
Journal Article
Open access
PDF file
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
KKKay Knöller
Kay Knöller
ALAna Claudia Queiroz Ladeira
Ana Claudia Queiroz Ladeira
Purpose The present study investigated lake and river sediments affected by metals from an acid mine drainage (AMD) from a former uranium mine. The role of bacterial sulfate reduction in the immobilization of contaminants was evaluated, and the analyses of acid volatile sulfide (AVS) and sequential extraction were performed. Consequently, the potential mobility and bioavailability of contaminants were established. Materials and methods Sulfur isotopic fractionation (δ34S), AVS, and sequential extraction procedure were used to assess the sulfate bacterial reduction and the availability of contaminants in the environment at six sampling stations. Results and discussion The δ34S indicated that bacterial reduction is a key process in the natural attenuation of contamination in the Águas Claras reservoir, precipitating metal sulfides. According to the USEPA criteria, adverse biological effects are expected for sample S1 (inside the reservoir) which is likely to be toxic, while for sediment S4 (in the river), the toxicity is uncertain. The other samples were classified as non-toxic, likely because of the decreased solubility of zinc sulfide. A decrease in the concentration of the contaminants downstream of the reservoir was observed. The predominance of U (0.4 %) in the labile fraction and the elevated concentrations of Zn (0.5 %) and Mn (0.7 %) in the sediments inside the reservoir raises concerns regarding the availability of these contaminants in the environment. Conclusions The main environmental impact appears to be concentrated in the Águas Claras reservoir, whereas the Antas creek does not seem to be affected by the AMD process. Although the bacterial sulfate reduction is effective in its production of sulfides capable of immobilizing the contaminants, the presence of Zn and U in the labile and reducible fraction is a matter of concern due to its long-term bioavailability. Thus, continuous monitoring of the redox potential of the waters and sediments, mainly in the reservoir, is recommended in order to assess and possibly prevent later dissolution of sequestered contaminants.

18 October 2021 in Lab on a Chip
Verified
Journal Article
Open access
PDF file
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
AAAbir Al-Tabbaa
Abir Al-Tabbaa
Capsule-based self-healing of cementitious materials is an effective way of healing cracks, significantly extending the life of structures, without imposing changes due to the incorporation of capsules into products during mixing. The methodologies currently being used for the development of capsules with a liquid core as a healing agent yield a wide range of sizes and shell thicknesses for the microcapsules, preventing a detailed assessment and optimisation of the microcapsule size and its effects. Uniquely, microfluidic technology offers precise control over the size and shell thickness through the formation of double emulsions. The drawback is that only small quantities of material can be typically produced. Here, by using paralleled junctions in a microfluidic device, high throughput production of materials was achieved, focusing for the first time on self-healing of cementitious materials. A microfluidic chip was assembled with 4 channels in parallel and selected hydrophobicity for the formation of the double emulsions. A coefficient of variation below 2.5% was observed for the 4 junctions, demonstrating the formation of monodisperse capsules. The control over the size and shell thickness by adjusting the flow rates was demonstrated, yielding capsules with an outer diameter of 615–630 μm and a shell thickness varying between 50 and 127 μm. By using triethanolamine as a surfactant, capsules with an aqueous core were produced. Furthermore, by selecting PEA, an acrylate with low tensile strength, the capsules embedded in the cement paste were successfully triggered to release the healing agent by crack formation. Capsules were successfully produced continuously for 7 h, with inner and outer diameters of 500 ± 31 μm and 656 ± 9 μm at a production rate of ∼13 g h−1 and a yield of around 80%. With these results and considering up to 6 chips in parallel, the production rate could be up to 1.5 kg per day. This demonstrates the huge potential of the microfluidic device with unique features to produce sufficiently large quantities of microcapsules for laboratory-scale assessment of self-healing performance.

20 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
BWBriony Whitfield
Briony Whitfield
Abir Al-TabbaaAbir Al-Tabbaa
Abir Al-Tabbaa
To facilitate the ongoing transition towards carbon neutrality, the use of renewable materials for additive manufacturing has become increasingly important. Here, we report for the first time the fabrication of microcapsules from biobased acrylate shells using microfluidics. To select the shell, a wide range of biobased acrylates disclosed in the literature was considered according to their tensile strength, ductile transition temperature and global availability. Once acrylate epoxidised soybean oil (AESO) was selected, its viscosity was adjusted to valuables suitable for the microfluidic device using two different diluting agents. Double emulsions were successfully produced using microfluidics, followed by photopolymerisation of the shell and characterisation of the capsules. Microcapsules containing AESO and isobornyl acrylate (IBOA) were produced with an outer diameter ~490 μm, shell thickness ranging between 36 and 67 μm, and production rates around 2.4 g/h. The mechanical properties of the shell were characterised as tensile strength of 29.2 ± 7.7 MPa, Young’s modulus of 1.7 ± 0.4 GPa and the ductile transition temperature was estimated as 42 °C. To investigate physical triggering, microcapsules produced with a size of 481 ± 4 μm and with a measured shell thickness around 6 μm were embedded in the cementitious matrix. The triggered shells were observed with scanning electron microscopy (SEM) and the uniform distribution of the capsules in cement paste was confirmed using X-ray computed tomography (XCT). These advances can facilitate the wide application of biobased resins for the fabrication of microcapsules for self-healing in cementitious materials.

18 December 2020 in Materials
Verified
Journal Article
Open access
PDF file
Benyi CaoBenyi Cao
Benyi Cao
LSLívia Ribeiro de Souza
Lívia Ribeiro de Souza
Abir Al-TabbaaAbir Al-Tabbaa
Abir Al-Tabbaa
Soil mix cut-off walls have been increasingly used for containment of organic contaminants in polluted land. However, the mixed soil is susceptible to deterioration due to aggressive environmental and mechanical stresses, leading to crack-originated damage and requiring costly maintenance. This paper proposed a novel approach to achieve self-healing properties of soil mix cut-off wall materials triggered by the ingress of organic contaminants. Oil sorbent polymers with high absorption and swelling capacities were incorporated in a cementitious grout and mixed with soil using a laboratory-scale auger setup. The self-healing performance results showed that 500 µm-wide cracks could be bridged and blocked by the swollen oil sorbents, and that the permeability was reduced by almost an order of magnitude after the permeation of liquid paraffin. It was shown by micro-CT scan tests that the network formed by the swollen oil sorbents acted as attachments and binder, preventing the cracked mixed soil sample from crumbling, and that the oil sorbents swelled three times in volume and therefore occupied the air space and blocked the cracks in the matrix. These promising results exhibit the potential for the oil sorbents to provide soil mix cut-off walls in organically-contaminated land with self-healing properties and enhanced durability.