Polyurethane (PU) grouting materials possess excellent fluidity and strong injectability. However, the high heat release during the reaction process restricts its application. In this study, with the addition of water glass (WG), a prepolymer was prepared by epoxy resin reacted with isocyanate to form modified polyurethane. The effects of epoxy resin and water glass on the compressive properties, expansion rate, structure of the cell, and maximum reaction temperature of the grouting materials were also investigated. The results showed that the cell size of modified PU was smaller and more regular, the maximum reaction temperature of the modified PU was reduced to 89 °C, and the compressive strength and expansion rate went up to 0.27 MPa and 57, respectively. This investigation will expand the application of PU grouting materials in underground engineering.
Tactile sensors based on triboelectric nanogenerators (TENGs) showed great potential for self-driven sensing in material identification. The existing TENG devices used strongly electrophilic materials as friction layers. For test materials with electrophilicity, their output signals are weak and difficult to efficiently recognize. Here, a TENG-based sensor with boron nitride nanosheets/waterborne epoxy (BNNSs/WEP) composites as the friction layer was proposed for improving the accuracy of identifying negative charged materials. During the process of contact friction with negative charged objects, the as-fabricated TENG device displayed excellent output performance, with a maximum output voltage of 2.7 V and a charge density of 88.32 nC m−2. Combining deep machine learning and the friction electric effect, we developed a material recognition system for TENG sensors with integrated fatigue testing, data processing, and display modules. Following the training of the convolutional neural network (CNN) model with friction electrical signals generated by TENGs, the model demonstrated high accuracy in recognizing eight different materials, with a confusion matrix accuracy of 100%. Then, a sensor was developed for real-time device monitoring, with recognition accuracy of 100%, 100%, 55% and 49% for four kinds of materials. This work will further facilitate the development of a material perception system in the machine intelligence field.
Corrosion and fire-induced strength degradation are primary drivers of severe economic losses and catastrophic failures in metallic structures. Polymer coatings serve as critical safeguards against corrosion; however, their flammability presents a fire risk, undermining the overall safety of the protected structure. Polyvinyl chloride (PVC) exhibits excellent inherent barrier properties and flame retardancy, but its poor film-forming ability has limited its practical application in high-performance coatings. To address this limitation, a core–shell nanostructure hybrid latex was successfully synthesized via seed emulsion polymerization, combining PVC with polyurethane (PU) and polybutyl acrylate (PBA). The resulting coating exhibits exceptional anti-corrosion performance, demonstrated by a low-frequency impedance modulus (|Z|0.01Hz) exceeding 4 × 1011 Ω cm2 after 30 days of immersion in a 3.5 wt% NaCl solution, confirming its robust and durable protective capability. Furthermore, the cone calorimeter test (CCT) revealed a 7.3% reduction in the peak heat release rate (PHRR) and an increased fire performance index (FPI) of 0.079 m2 s kW−1 for the PVC–PU–PBA film. This work presents a feasible and scalable strategy for fabricating multifunctional waterborne coatings with integrated corrosion resistance and flame retardancy, offering a promising solution for advanced steel protection.