Hongjie Zhang

Prof. Dr. Hongjie Zhang

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2022 in Sensors
Verified
Journal Article
Open access
PDF file
MYMing Yu
Ming Yu
LLLiu Wenwen Wenwen Liu
Liu Wenwen Wenwen Liu
JZJian Zhao
Jian Zhao
YHYanyan Hou
Yanyan Hou
XHXuewu Hong
Xuewu Hong
HZHongjie Zhang
Hongjie Zhang
Soft pneumatic actuators are extensively used in soft robots, and their bending angles and kinematic rules at different pressures play a crucial role in practical applications. This investigation aims to model the bending angle and motion of a new type of soft pneumatic actuator that adopts a composite structure consisting of two kinds of pneumatic networks. Based on the structural and deformation characteristics of the proposed soft actuator, the constitutive model is established, and then the moment equilibrium and virtual work principle are combined to model the bending angle of two pneumatic modules. The kinematic model of the proposed soft actuator is co-opted from the kinematic modeling of rigid robots. By employing the piecewise constant curvature method and coordinate transformation, the location of any chamber of the soft actuator can be calculated. The effectiveness of the developed analytical models is then tested, and the calculated results show good agreement with the experimental results. Finally, three soft actuators are used to constitute a soft gripper, and the pinching and enveloping grasping performance are examined. All experimental test results demonstrate that the developed bending angle and kinematic models can explain the bending principle of the proposed soft actuators well.

13 July 2022 in Sensors
Verified
Journal Article
Open access
PDF file
HZHongjie Zhang
Hongjie Zhang
LLLiu Wenwen Wenwen Liu
Liu Wenwen Wenwen Liu
MYMing Yu
Ming Yu
YHYanyan Hou
Yanyan Hou
This investigation presents a novel soft-robotic pneumatic gripper that consists of three newly proposed soft actuators. The newly proposed soft actuators adopt a composite structure of two kinds of pneumatic networks which can work independently and play their respective roles in grasping. The design, analyses, and fabrication of the proposed soft actuators are introduced systematically, and then an experimental system is built to examine the output characteristics of the soft actuator. Compared with the conventional single pneumatic network-based soft actuator, the newly proposed one combines the advantages of the two pneumatic networks, and it employs a larger output force and retains desired bending deformation ability at the same time. The grasping performance test results show that the new soft gripper constituted by the proposed soft actuators has high reliability and stability whether in pinching or in enveloping grasping, and it is also competent for grasping heavier or irregular objects, demonstrating the feasibility and effectiveness of the newly proposed soft actuator, and giving it a good and wide application prospect.

12 December 2012 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
YYYanfang Yang
Yanfang Yang
BWBin Wei
Bin Wei
PCPanpan Chen
Panpan Chen
HZHongjie Zhang
Hongjie Zhang
MQMing Qiu
Ming Qiu
DZDong Zhang
Dong Zhang
Quench protection is a key technology for the practical application of superconducting magnetic energy storage (SMES). In this paper, a digital quench protection system has been developed for a kJ class SMES hybrid magnet fabricated by YBCO and BSCCO at China Electric Power Research Institute. The digital signal processing technology is adopted to realize the algorithm. It can trigger output signal that is used to activate the protection circuit and control the magnet ramp down in the event of a quench. Also, the human machine interface is developed, which is used to monitor the operating states of the operating environment, quench protection circuit and superconducting magnet. Finally, the quench protection system passed the SMES dynamic simulation experiment.

12 May 2025 in Measurement Science and Technology
Verified
Journal Article
Closed access
XDXiangjun Du
Xiangjun Du
HZHongjie Zhang
Hongjie Zhang
LYLing Yu
Ling Yu
DYDengjie Yang
Dengjie Yang
With the increasing complexity of industrial equipment, the fault diagnosis of rolling bearings, which are important rotating mechanical components, is particularly critical. Rolling bearing fault diagnosis under small-sample conditions faces challenges of data scarcity and insufficient model validity. In this paper, a fault diagnosis method based on multi-sensor data fusion is proposed to solve the problem of rolling bearing fault diagnosis under small-sample conditions. First, the multi-sensor time–frequency image fusion module is designed to convert the multi-source 1D vibration signals into multi-source 2D fused images by short-time Fourier transform, preserving the time–frequency characteristics of the original signals. Second, the expansion residual shrinkage weighting module is constructed to extract multi-scale features from multi-source information by using multi-scale expansion convolution and improved residual shrinkage module, while the global information selection mechanism is designed to allow the network to focus on key features. Finally, a pyramid feature fusion network is constructed to minimize the information loss phenomenon, and the identification of different states is performed using Softmax classifiers. Experimental validation was performed using the Case Western Reserve University bearing dataset bearing dataset and Southeast University bearing dataset bearing dataset, and the results show that the proposed method has excellent fault diagnosis and good generalization ability under small-sample conditions.


21 March 2025 in Measurement Science and Technology
Verified
Journal Article
Closed access
XDXiangjun Du
Xiangjun Du
HZHongjie Zhang
Hongjie Zhang
LYLi Yu
Li Yu
DYDengjie Yang
Dengjie Yang
In the realm of industrial conveyor belt systems, the belt conveyor drum is a critical component whose fault-free operation is essential for seamless material transportation. Existing methods for detecting faults in these drums, including manual inspection and sensor-based techniques, have been hampered by limitations such as slow detection speed, high cost, and insufficient accuracy and reliability. This study addresses these challenges by proposing a novel and highly efficient lightweight network model, namely YOLOv8n + EMBC + SCC. The developed model is engineered to proficiently identify and classify a diverse range of drum faults, such as damage, wear, cracks, and lagging shedding, through video-based analysis. Leveraging the inherent strengths of YOLOv8n in terms of target detection accuracy and speed, we have meticulously designed the effective MB Conv module (EMBC) module. This module, underpinned by depth-wise separable convolution efficient convolution, replaces the conventional C2F module in the backbone and neck segments of the network. This strategic substitution has yielded a significant 14.5% enhancement in processing speed and a notable 0.7% improvement in detection accuracy. Complementing this innovation, the Spatial and Channel Reconstruction Convolution (SCC) efficient convolution module has been incorporated into the detection head. By supplanting the standard Conv module, it has effectively reduced the computational load while further augmenting the model’s performance. This has led to an additional 11.73% increase in speed and an extra 0.7% elevation in accuracy. To rigorously evaluate the efficacy of the proposed model, an extensive experimental campaign was conducted using a comprehensive dataset. The experimental results unequivocally demonstrate that the YOLOv8 + EMBC + SCC model attains an outstanding detection accuracy of 93.4%, surpassing the baseline (BL) YOLOv8n by 0.9%. Compared with YOLOv10, the YOLOv8 + EMBC + SCC model shows superiority. In terms of detection accuracy, the 93.4% of YOLOv8 + EMBC + SCC is higher than the assumed 92.3% of YOLOv10. Regarding speed, the frames per second (FPS) of 38.21 for YOLOv8 + EMBC + SCC is faster than the assumed 35.7 of YOLOv10. Moreover, the model exhibits an enhanced FPS value of 38.21, representing a substantial 3.56 f s−1 improvement over the BL. The heatmap analysis provides conclusive visual evidence of the model’s superior capabilities in precisely localizing and identifying faults with high accuracy. In summary, this research makes a substantial contribution to the field of conveyor belt drum fault detection. The proposed model not only combines rapid detection speed with high accuracy but also offers reliable fault judgment, thereby positioning it as an ideal solution for industrial applications. It holds great potential for enhancing operational efficiency and streamlining maintenance practices in industrial settings, ultimately ensuring the reliable and uninterrupted operation of conveyor belt systems.