Day by day, the demand for wireless systems is increasing while the available spectrum resources are not sufficient. To fulfil the demand for wireless systems, the spectrum hole (spectrum vacant) should be found and utilised very effectively. Cognitive radio (CR) is a device which intelligently senses the spectrum through various spectrum-sensing detectors. Based on the complexity and licensed user’s information present with CR, the appropriate detector should be utilised for spectrum sensing. In this paper, a hybrid detector (HD) is proposed to determine the spectrum hole from the available spectrum resources. HD is designed based on an energy detector (ED) and matched detector (MD). Unlike a single detector such as ED or MD, HD can sense the signal more precisely. Here, HD can work on both conditions whether the primary user (PU) information is available or not. HD is analysed under heterogeneous environments with and without cooperative spectrum sensing (CSS). For CSS, four users were used to implement OR, AND, and majority schemes under low SNR walls. To design the HD, specifications were chosen based on the IEEE Wireless Regional Area Network (WRAN) 802.22 standard for accessing TV spectrum holes. For the HD model, we achieved the best results through OR rule. Under the low SNR circumstances at −20 dB SNR, the probability of detection (PD) is maximised to 1 and the probability of a false alarm (PFA) is reduced to 0 through the CSS environment.
Demand of wireless users are increasing day by day, available spectrum resources should be utilized effectively. Cognitive Radio is wireless technology which configured dynamically to adapt environmental changes and change its parameters according to vacant channels. IEEE 802.22 is a standard defined for Wireless Regional Area Networking (WRAN) to utilize TV white band channels. Under the NETSIM environment, Cognitive radio network topology is made up and analyzed its various parameters like simulation time, packets transmitted, packets errored, various codecs, and throughput.
Now a days demand of wireless devices are increasing very rapidly by different users, while available spectrum resource is very limited. To overcome the need of different users, spectrum should be utilized efficiently. Cognitive Radio is introduced to access the spectrum dynamically by taking the permission of the licensed users for specific time interval when their spectrum is freely available. For this task of CR, many spectrum sensing techniques are introduced to sense the spectrum. Here in this paper, we have focused on energy detector(ED) spectrum sensing technique and overcome the problems with the ED at low SNR. Improved Energy Detector and Variable Threshold Energy Detector (VTED) give better results than normal ED technique which has been demonstrated through different receiver operating characteristics. Under Cooperative Spectrum Sensing (CSS) environment, it has been shown that OR logic gives probability of detection greater than 0.9 rather than the AND logic for optimized number of cooperative users 10. Results have been shown that VTED technique overcome the low SNR region problem of normal ED technique with higher probability of detection i.e. greater than 0.9 for cognitive radio networks.
1 May 2022 in International Journal of Sensors, Wireless Communications and Control
Background: Increasing demand for wireless devices leads to utilizing spectrum resources efficiently. While available spectrum resources are very limited , in study found that all licensed users are not utilizing their spectrum all the time. Objective : Cognitive Radio (CR) is used to detect free channels from available spectrum resources and access it dynamically without interference to the licensed users. There are various spectrum sensing (SS) techniques available which can be used to sense the spectrum of licensed users. Methods: Spectrum sensing technique, Energy Detector (ED) is analysed under Rayleigh fading channel here. Further, Single Input Single Output (SISO) and Multiple Input Multiple Output (MIMO) channel models developed under consumer environment. ED technique is further analysed with cooperative spectrum sensing (CSS) environment to enhance the single CR user detection problems. Results: For ED, Probability of Detection (PD) 0.9 and Probability of False Alarm (PFA) 0.1 are achieved under worst SNR conditions like -20dB which is the requirement for standard IEEE 802.22 Wireless Regional Area Network (WRAN). Conclusion: Various receiver operating characteristics are obtained through practical simulations and theoretical calculations for each SISO and MIMO channel models with and without CSS scenario to achieve the target PD & PFA .
The proposed SLM scheme transforms an input incoming symbol sequence into a set of OFDM symbols by multiplying the phase sequences to the symbol after a intermediate inverse fast Fourier transform (IFFT) stage. The peak-to-average power ratio (PAPR) of OFDM symbols is calculated & the symbol with least PAPR is sent for transmission. Turbo code is used with OFDM for forward error correction. To achieve better spectral efficiency and high capacity the combination of π/4-shifted DQPSK modulation is used along with Turbo coded OFDM. One of the major reasons behind the provision for differential detection is to achieve low complexity at the receiver. A selective-level-mapping type turbo coded OFDM scheme is proposed with the interleaver of turbo encoder to reduce the associated PAPR (peak to average power ratio) reduction. The current model is used to analyze bit error rate (BER) measurement with π/4-shifted-DQPSK modulation in presence of fading channels. The symbols are perturbed by additive white Gaussian noise (AWGN). The combination of DQPSK with SLM not only reduces the complexity at receiver but also results in reduction in PAPR of OFDM signal. The PAPR of the model is calculated with absence of SLM block initially and later with the addition of SLM block resulting in the difference of PAPR up to 3 dB. The simulink is used to model the performance of turbo encoder and decoder to achieve minimum symbol error rate at the receiver with varying iterations. The minimum symbol error rate of 10 -6 is calculated using the principle of APP decoder.