Ongard Thiabgoh

Dr. Ongard Thiabgoh

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2022 in Biosensors
Verified
Journal Article
Open access
PDF file
VJValery Ortiz Jimenez
Valery Ortiz Jimenez
KHKee Young Hwang
Kee Young Hwang
DNDang Nguyen
Dang Nguyen
YRYasif Rahman
Yasif Rahman
CAClaire Albrecht
Claire Albrecht
Manh-Huong PhanManh-Huong Phan
Manh-Huong Phan
A small DC magnetic field can induce an enormous response in the impedance of a soft magnetic conductor in various forms of wire, ribbon, and thin film. Also known as the giant magnetoimpedance (GMI) effect, this phenomenon forms the basis for the development of high-performance magnetic biosensors with magnetic field sensitivity down to the picoTesla regime at room temperature. Over the past decade, some state-of-the-art prototypes have become available for trial tests due to continuous efforts to improve the sensitivity of GMI biosensors for the ultrasensitive detection of biological entities and biomagnetic field detection of human activities through the use of magnetic nanoparticles as biomarkers. In this review, we highlight recent advances in the development of GMI biosensors and review medical devices for applications in biomedical diagnostics and healthcare monitoring, including real-time monitoring of respiratory motion in COVID-19 patients at various stages. We also discuss exciting research opportunities and existing challenges that will stimulate further study into ultrasensitive magnetic biosensors and healthcare monitors based on the GMI effect.

13 January 2026 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
TPThimpika Pornprom
Thimpika Pornprom
BPBongkochawan Pakamwong
Bongkochawan Pakamwong
JSJidapa Sangswan
Jidapa Sangswan
APAuradee Punkvang
Auradee Punkvang
PTPaptawan Thongdee
Paptawan Thongdee
Ongard ThiabgohOngard Thiabgoh
Ongard Thiabgoh

11 February 2026 in Eng
Verified
Journal Article
Open access
PDF file
WNWichai Wichai Nramat
Wichai Wichai Nramat
ESEkawit - Songkrohb
Ekawit - Songkrohb
PBPatiwat - boonmac
Patiwat - boonmac
WTWasakorn Traiphat
Wasakorn Traiphat
Ekkachai MartwongEkkachai Martwong
Ekkachai Martwong
Ongard ThiabgohOngard Thiabgoh
Ongard Thiabgoh
This study presents a low-cost wireless sensor network (WSN) integrated with an Internet of Things (IoT) platform for continuous monitoring of agro-environmental parameters relevant to rice harvest decision support. Solar-powered sensor nodes equipped with temperature-humidity (DHT22) and light intensity (BH1750) sensors were deployed in a Pathum Thani 1 rice field in Si Prachan, Suphan Buri province, Thailand. Environmental data were recorded hourly from June to September 2025 and transmitted wirelessly to a cloud-based dashboard for real-time visualization. Growing Degree Days (GDD) were calculated from measured air temperature using a literature-based base temperature, and cumulative GDD (CGDD) was used to track rice growth progression across vegetative, reproductive, and grain-filling stages. The system demonstrated stable long-term operation and continuous data acquisition under field conditions. Observed CGDD trends were consistent with reported growth-stage thresholds for the studied rice variety, while measured light intensities ranged from 36,900 to 37,810 lx, relative humidity remained consistently high throughout the season, and air temperatures varied between daily minima of 23.5–25.2 °C and maxima near 35.4 °C, which are suitable for rice photosynthesis and development. The seasonal CGDD increased linearly to 580.3, 1189.9, 1593.7, and 2385.7 °C by the end of June, July, August, and September, respectively, exhibiting a strong linear relationship with days after 1 June 2025 (R2 = 0.9999), which confirms stable thermal accumulation throughout the growing season.

1 February 2026 in Eng
Verified
Journal Article
Open access
PDF file
WNWichai Wichai Nramat
Wichai Wichai Nramat
WTWasakorn Traiphat
Wasakorn Traiphat
Ekkachai MartwongEkkachai Martwong
Ekkachai Martwong
PTPatcha Treemongkol
Patcha Treemongkol
LPLuedate Phatedoung
Luedate Phatedoung
Ongard ThiabgohOngard Thiabgoh
Ongard Thiabgoh
This study presents the design, fabrication, and performance evaluation of a solar dryer capsule cabinet equipped with a parabola reflector, developed to enhance drying efficiency through the reflection of sunlight onto both the upper and lower surfaces of the product. Conventional solar drying exposes only the upper surface, resulting in uneven heating and the need for manual turning. The proposed system integrates a parabolic reflector and IoT-based monitoring sensors (BH1750 light sensor and DHT22 temperature-humidity sensor) to optimize heat distribution and record real-time environmental parameters. Dry experiments were conducted using Citrus hystrix DC. (Makrut lime) peels under natural sunlight from 9:00 a.m. to 5:00 p.m. The moisture loss achieved with the proposed dryer (P-DSD) was 45.66%, compared with 6.79% for direct solar drying (DSD). The drying rate increased from 3.05 g h−1 (DSD) to 20.50 g h−1 (P-DSD), while the specific energy consumption (SEC) decreased from 3519.75 kWh kg−1 to 523.67 kWh kg−1, representing an 85.13% energy reduction. Economic analysis showed a system cost of $1384 and a return on investment of 30.0%. These results demonstrate that the proposed solar dryer capsule cabinet with a parabola reflector offers a low-cost, eco-friendly, and high-efficiency solution for drying agricultural and herbal products, significantly shortening the drying time and improving product quality.

5 June 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
WNWichai Wichai Nramat
Wichai Wichai Nramat
PTPatcha Treemongkol
Patcha Treemongkol
WTWasakorn Traiphat
Wasakorn Traiphat
Ongard ThiabgohOngard Thiabgoh
Ongard Thiabgoh
Ekkachai MartwongEkkachai Martwong
Ekkachai Martwong
Greenhouse vegetable cultivation in tropical regions is often affected by high temperature, unstable humidity, and irrigation management problems. This study presents a pilot-scale case study of Green Oak lettuce cultivation using an IoT-based sensor monitoring and automated irrigation control system in Phra Nakhon Si Ayutthaya Province, Thailand. The system used AM2315C, BH1750, NPK, and flow sensors connected to ESP32. Data were transmitted to the ThingsBoard platform for real-time environmental monitoring and irrigation control. The greenhouse temperature averaged 33.21 ± 3.61 °C, while relative humidity averaged 71.55 ± 9.66%. The average daytime light intensity was 16,976 ± 409 lux. Nitrogen (N), phosphorus (P), and potassium (K) concentrations remained within ranges of 62.42–74.57, 76.46–84.30, and 71.46–79.30 mg/kg, respectively. Economic evaluation demonstrated favorable feasibility, with a water use efficiency (WUE) of 0.63 kg/L, return on investment (ROI) of 40%, benefit–cost ratio (BCR) of 1.6, and payback period of approximately 2.5 years. The developed system demonstrates potential for supporting sustainable greenhouse agriculture and contributes to SDG 2, SDG 6, SDG 12, and SDG 13 under tropical agricultural conditions.

13 September 2022 in arXiv
Verified
Preprint
Open access
PDF file
JSJiang SiDa
Jiang SiDa
TETatiana Eggers
Tatiana Eggers
Ongard ThiabgohOngard Thiabgoh
Ongard Thiabgoh
CAClaire Albrecht
Claire Albrecht
Jingshun LiuJingshun Liu
Jingshun Liu
Manh-Huong PhanManh-Huong Phan
Manh-Huong Phan
Amorphous Co-rich microwires with excellent soft magnetic and mechanical properties produced by melt-extraction technique are emerging as a multifunctional material for a variety of applications ranging from ultrasensitive magnetic field sensors to structural health self-monitoring composites. There is a pressing need for enhancing these properties to make the microwires practical for integration into new technologies. Conventional heat treatments at temperature below crystallization may improve the magnetic softness of an as-quenched amorphous wire, but usually deteriorate the good mechanical characteristic of the wire due to crystallization. To overcome this, we propose a new approach that utilizes the advantages of a multi-step Joule current annealing method to design novel (nanocrystal, amorphous)/amorphous core/shell structures directly from as-quenched amorphous microwires. These results show that the density and size of nanocrystals in the core can be optimized by controlling the Joule current intensity, resulting in the large enhancement of soft magnetic and giant magneto-impedance properties, while the amorphous shell preserves the excellent mechanical strength of the microwire. This study also provides a new pathway for the design of novel core/shell structures directly from rapidly quenched amorphous magnetic materials that are currently exploited in high frequency transformers, sensing and cooling devices.