Electroactive polymers are soft capacitors made of thin elastic and electrically insulating films coated with compliant electrodes offering a large amount of deformation. They can either be used as actuators by applying an electric charge or used as energy converters based on the electrostatic principle. These unique properties enable the industrial development of highly efficient and environmentally sustainable energy converters, which opens up the possibility to further exploit large renewable and inexhaustible energy sources like wind and water that are widely unused otherwise. Compared to other electroactive polymer materials, polyurethanes have certain advantages over silicones and acrylates. Due to the inherently higher permittivity as well as the higher dielectric breakdown strength, the overall specific energy, a measure for the energy gain, is better by at least factor of 10, that is, more than 10 times the energy can be gained out of the same amount of material. In order to reduce conduction losses on the electrode during charging and discharging, a highly conductive bidirectional stretchable electrode has been developed. Other important material parameters like stiffness and bulk resistivity have been optimized to fit the requirements. We also report on different measures to evaluate and improve electroactive polymer materials for energy harvesting by, for example, reducing the defect occurrence and improving the electrode behavior.
7 September 2016 in Smart Materials and Structures
Composites made of an elastomeric matrix and a magnetizable filler, called magnetoactive elastomers (MAEs), are able to undergo a change of their rheological or damping behavior by applying external magnetic fields. Furthermore, these fields lead to actuation forces and deformations of these materials. Consequential, actuation forces and deformations caused by this behavior can be utilized in an actuation mode of the MAE material. To investigate the induced actuation characteristic different cylindrical MAE specimens are described in a first step. In order to perform a measurement of the actuation a suitable test bench is specified and designed. By this test bench a variable external magnetic field has to be provided within an airgap the MAE specimen are placed in. Furthermore, it has to enable a measurement of the induced actuation forces in a specified axial direction on the one hand and the induced elongation in the same direction on the other hand. Subsequently, a theoretical investigation of the described behavior is performed by use of a suitable finite element analysis (FEA). Therefore, an appropriate continuum mechanical modeling approach based on the Kelvin force is introduced. Implementation of this modeling approach within the FEA-tool Comsol Multiphysics enables a coupled simulation of the magnetism and structural-mechanics domain. Finally, an experimental validation of the modeling approach is carried out by measurements using the developed test bench showing a good accordance.
2 April 2015 in Journal of Intelligent Material Systems and Structures
The behavior of magnetorheological fluids in rotational systems for torque transmission such as brakes and clutches offering a drum-shaped shear gap design is investigated for high-speed operation up to 6000 rpm or respectively high shear rates up to 34,000 s−1. The occurrence of a Taylor vortex flow is described and experimentally proven for the operation without and with an applied magnetic field. By measurements it is shown that a mixing effect due to the vortex flow avoid a disadvantageous particle centrifugation. In further measurements a weakening of the magnetorheological effect with increasing rotational speeds is observed. Utilizing a magnetic dipole model for calculating the yield stress with a common parameterization based on measurements, a prediction of the achievable torque as a function of the rotational speed is possible. This modeling approach provides an important tool for the design process of magnetorheological-fluid-based actuators for high rotational speed application.
Dielectric elastomer transducers (DETs) consist of thin elastomer films and compliant conductive electrodes on each side. Several DE-based systems, e.g., DE actuators, loudspeakers or sensors, have great potential in industrial applications. Different manufacturing processes for DE-based transducers have been realized so far. An alternative manufacturing process, based on sheet-to-sheet lamination of pre-fabricated elastomer films, appears promising for the manufacturing of large numbers of DETs, as, on the one hand, the commercially available elastomer films produced are characterized by homogeneous and reproducible properties and, on the other hand, the curing time during processing can be avoided. However, the handling of thin elastomer films and a controlled film transfer onto a surface is a challenge, as pre-stretch and wrinkles can easily occur. The presented sheet-to-sheet lamination mechanism facilitates controllable film handling well, whereby a high number of DE layers can be achieved. This paper focuses on the developed, automated film lamination of pre-cut film sheets and the electrode application via a jetting system, representing core components of the corresponding overall manufacturing process of DE laminates. The process realization on a laboratory scale is presented and manufactured DET specimens investigated for validation purposes.
28 July 2016 in Journal of Intelligent Material Systems and Structures
In this article, a novel brake for application in wind turbines developed with the focus on long-term stability is proposed. The brake, whose transmission of power is based on magnetorheological fluids, is designed for fail-safe operation under industrial standards. The long-term stability performance over a lifetime of up to 20 years can be ensured by the use of a Taylor-vortex flow in idle mode that causes a mixing effect for preventing particle separation. Beside a detailed description of the design, long-term measurements with requirements for use in wind turbines emulating a timely reduced aging of the magnetorheological fluid will be presented by applying Hardware-in-the-Loop simulations. The results show an outstanding torque performance over an emulated lifetime of 20 years of use in wind turbines that outpaces the capability of conventional brakes whose power transmission is based on dry friction.