To address the problems of short-rangee and poor braking safety of electric vehicles, this paper proposes a master-slave electro-hydraulic hybrid passenger car drive system based on planetary gear. The system couples the electrical energy output from the electric motor with the hydraulic energy output from the electro-hydraulic pump/motor through the planetary gear. The hydraulic system is used as the auxiliary power source of the power system giving full play to the advantages of the hydraulic system and the electric system. After theoretical analysis, this paper establishes a master-slave electro-hydraulic hybrid electric vehicle (MSEHH-EV) model based on planetary gear in AMESim software. A braking energy recovery control strategy is designed with the maximum braking energy recovery efficiency as the target. Braking strength determines the switching of braking modes. Finally, comparing the certified pure electric vehicle (EV) model in AMESim, we are able to substantiate the superiority of the strategy proposed in this paper. The simulation results revealed that the battery consumption rate of the new power vehicle is reduced by 17.766%, 11.358%, and 9.427% under UDDS, NEDC, and WLTC conditions, respectively, which supports the range. At the same time, the braking distance is significantly shortened, and the maximum braking distance is shortened by 15.65 m, 21.97 m, and 21.45 m, respectively, under the three operating conditions, which improves the braking safety.

In response to the problems of considerable size, loose structure, and low energy conversion efficiency of multi-energy power coupling devices, this paper makes improvements based on the mechanical–electric–hydraulic power coupler proposed by our research group. We propose a new asynchronous mechanical–electric–hydraulic power coupler (IA-MEHPC). This mechanism integrates a traditional three-phase asynchronous motor with a swashplate axial piston pump/motor to realize the mutual conversion of electrical, mechanical, and hydraulic energy. Compactness, efficiency, and adaptability are the distinguishing features of the complex. This paper builds a three-dimensional model of the IA-MEHPC and a two-dimensional theoretical model of the electrical structure (motor part). Moreover, the electrical structure parameters of the IA-MEHPC are optimized using an approximate response surface-based optimization method. The maximum motor peak torque and minimum torque fluctuation are identified as optimization objectives, and we obtain the optimal combination of parameters. The simulation results show that, compared to the pre-optimized structure, the peak motor torque of the optimized IA-MEHPC is increased by 5.78%, and the torque pulsation coefficient is reduced by 15.83%, in line with engineering practice expectations. This paper innovatively proposes and optimizes IA-MEHPC, which is significant for developing hybrid mechanical devices and subsequent research.