A combined solar chimney is proposed in this paper that integrates an inclined-roof solar chimney with a traditional Trombe wall. The ventilation performance of the combined solar chimney is analyzed numerically and then compared with the Trombe wall and the inclined-roof solar chimney. The feasibility of different operation modes and the ventilation effect under different environment conditions are also discussed. The results show that when the ambient temperature ranges from 298 to 303 K in the summer, a natural ventilation mode is appropriate. Otherwise, an anti-overheating mode is recommended. When the ambient temperature is lower than 273 K in the winter, a space heating mode has a better heating effect. A preheating mode can be employed to improve the indoor air quality when the ambient temperature is higher than 278 K. The simulation results indicates that the ventilation effect of the combined solar chimney is better than that of the Trombe wall and the inclined-roof solar chimney, and the problem of overheating can be avoided. The study provides guidance for the optimal operation of a combined solar chimney.

Building sector is a significant contributor to global carbon emission, primarily driven by electricity consumption and air-conditioning demands. A sustainable pathway toward building decarbonization involves harnessing solar energy to simultaneously generate electricity and address indoor humidity control. In this work, we present an innovative hybrid system that integrates photovoltaic cells, thermoelectric generators, and metal-organic frameworks to enable all-day power generation and efficient air dehumidification. This system leverages the synergy between moisture-induced adsorption/desorption heat from MOFs and the harvesting of solar heat and radiative cooling from PV cells. Notably, the synergistic effects significantly enhanced the PV efficiency of the photovoltaic cell by 23% due to the intensified heat exchange during moisture desorption, and increased the average thermoelectric efficiency by 353%. Additionally, it effectively reduced the air relative humidity from an average of 79.12% to 63.34% within 4 hours. We further demonstrate the application of this hybrid system on building roofs, achieving maximum power densities of 88 W·m-2 during the day and 2.12 W·m-2 at night in Nanjing, respectively. Across various cities in China, the system shows the annual power generated ranges from 1.08×104 to 1.69×104 kW, along with air-conditioning energy savings between 29 and 498 kW. This novel approach provides a low-energy and sustainable solution for continuous power generation and air dehumidification, supporting the decarbonization of buildings.

The aim of this study is to address the lack of comprehensive analysis methods for multi-functional Trombe wall systems. The objective is to establish an integrated evaluation system that assesses thermal, purification, and power generation performance. This study introduces a novel multi-objective analysis method coupling energy and exergy efficiency for three types of Trombe wall structures: traditional, thermal-catalytic (TC), and TC–photovoltaic (TC-PV). This study simultaneously monitors heat transfer, formaldehyde degradation, and photovoltaic power generation performance. A key novelty is the introduction of a quantitative index for “purification efficiency” and the revelation of the co-evolution law between PV (photovoltaic) coverage and the three types of efficiency for the first time. This study evaluates three cases: traditional, TC, and TC-PV Trombe walls. The results show that the thermal efficiencies of the three Trombe walls are 47.2%, 41.9%, and 51.7%, respectively, with corresponding thermal exergy efficiencies of 0.59%, 0.49%, and 0.63%. The TC and TC-PV Trombe walls achieve purification efficiencies of 57.0% and 53.0% and purification exergy efficiencies of 2.53% and 2.42%, respectively. The TC-PV Trombe wall has electrical and electrical exergy efficiencies of 16.0% and 12.84%, respectively. System structure optimization analysis indicates that the system achieves the best exergy efficiency when the solar irradiation is 400 W/m² and the air channel thickness is 0.05 m. Additionally, the purification exergy efficiency increases with higher formaldehyde concentrations, while thermal, purification, and electric exergy efficiencies all increase with greater PV coverage. Exergy loss analysis reveals that the TC layer and heat-absorbing plate are major sources of loss. Therefore, developing catalytic materials with high absorptivity and high catalytic activity could enhance the system’s exergy efficiency.

Traditional rooftop greenhouses offer a promising solution for urban vegetable supply but have the disadvantages of overheating during the daytime and supercooling during the nighttime. To address these issues, a novel solar greenhouse system using nanofluid spectral splitting and phase change materials (NSS-PCMs) was developed. In this study, a 75-day thermal environment test experiment was conducted on the novel solar greenhouse, and the growth status and nutrient composition of three typical plants were evaluated. By optimizing the greenhouse structure parameters through the model, over 80% of 300–800 nm wavelengths for vegetable photosynthesis were transmitted to the greenhouse, while the remaining spectrum was used for heat storage to maintain warmth during nighttime. The novel solar greenhouse reduced daytime temperatures by 5.2 °C and increased nighttime temperatures by 6.9 °C, reaching a maximum thermal efficiency of 53.4% compared to traditional greenhouses. The 75-day temperature detection showed that optimal temperature ranges were maintained for approximately 60 days, both during daytime and nighttime, with an 80% assurance rate. The growth rates of three vegetables in the novel solar greenhouse improved by 55%, 35%, and 40%, and the nutrient composition doubled compared to the control group.