The Internet of Things (IoT) is rapidly becoming an integral part of our life and also multiple industries. We expect to see the number of IoT connected devices explosively grows and will reach hundreds of billions during the next few years. To support such a massive connectivity, various wireless technologies are investigated. In this survey, we provide a broad view of the existing wireless IoT connectivity technologies and discuss several new emerging technologies and solutions that can be effectively used to enable massive connectivity for IoT. In particular, we categorize the existing wireless IoT connectivity technologies based on coverage range and review diverse types of connectivity technologies with different specifications. We also point out key technical challenges of the existing connectivity technologies for enabling massive IoT connectivity. To address the challenges, we further review and discuss some examples of promising technologies such as compressive sensing (CS) random access, non-orthogonal multiple access (NOMA), and massive multiple input multiple output (mMIMO) based random access that could be employed in future standards for supporting IoT connectivity. Finally, a classification of IoT applications is considered in terms of various service requirements. For each group of classified applications, we outline its suitable IoT connectivity options.
The use of millimeter-wave (mmWave) bandwidth is one key enabler to achieve the high data rates in the fifth-generation (5G) cellular systems. However, mmWave signals suffer from significant path loss due to high directivity and sensitivity to blockages, limiting its adoption within small-scale deployments. To enhance the coverage of mmWave communication in 5G and beyond, it is promising to deploy a large number of reconfigurable intelligent surfaces (RISs) that passively reflect mmWave signals towards desired directions. With this motivation, in this work, we study the coverage of an RIS-assisted large-scale mmWave cellular network using stochastic geometry, and derive the peak reflection power expression of an RIS and the downlink signal-to-interference ratio (SIR) coverage expression in closed forms. These analytic results clarify the effectiveness of deploying RISs in the mmWave SIR coverage enhancement, while unveiling the major role of the density ratio between active base stations (BSs) and passive RISs. Furthermore, the results show that deploying passive reflectors are as effective as equipping BSs with more active antennas in the mmWave coverage enhancement. Simulation results confirm the tightness of the closed-form expressions, corroborating our major findings based on the derived expressions.
16 August 2021 in IEEE Transactions on Communications
With the increasing adoption of millimeter-waves (mmWave) over cellular networks, outdoor-to-indoor (O2I) communication has been one of the challenging research problems due to high penetration loss of buildings. To address this, we investigate the practicability of utilizing reconfigurable intelligent surfaces (RISs) for assisting such O2I communication. We propose a new notion of prefabricated RIS-empowered wall consisting of a large number of chipless radio frequency identification (RFID) sensors. Each sensor maintains its own bank of delay lines. These sensors which are built within the building walls can potentially be controlled by a main integrated circuit (IC) to regulate the phase of impinging signals. To evaluate our idea, we develop a thorough performance analysis of the RIS-based O2I communication in the mmWave network using stochastic-geometry tools for blockage models. Our analysis facilitates two closed-form approximations of the downlink signal-to-noise ratio (SNR) coverage probability for RIS-based O2I communication. We perform extensive simulations to evaluate the accuracy of the derived expressions, thus providing new observations and findings.
Since the 1960s, joint sensing and communication (JSAC) has been proposed as an attractive technique with advantages of enhanced spectral and hardware efficiency along with low latency. However, in those old days, complex transceiver designs hindered the massive adoption of JSAC in many applications. Nevertheless, thanks to advancing wireless technologies in recent years, JSAC has recently attracted substantial attention for a wide range of civil and military applications. In particular, JSAC enables simultaneous sensing and communication functionalities with the full cooperation of both operations in shared resources such as hardware as well as radio resources (i.e., frequency, time, space and so on). Note that sensing functionality is associated with other sub-functionalities of radio-detection-and-ranging (Radar), computation, and localization which are sporadically used terms in the literature. Thus, to generalize the concept and avoid any confusion, we use the term “sensing” in the acronym JSAC as a consistent and general term associated with the other aforementioned sub-functionalities. This paper elaborates on defining sensing and communication operations and then, provides an overview with preliminaries, key latest findings, and state-of-the-art of JSAC. It also explores both existing and emerging Internet of Things (IoT) applications of JSAC. Next, it provides a new classification of JSAC technologies by taking into account not only the existing JSAC technologies but also a diverse range of technologies that allow JSAC to be used for various types of IoT applications. Eventually, this study projects future research directions and challenges of enabling JSAC in IoT.
Non-terrestrial networks (NTNs) have recently attracted elevated levels of interest in large-scale and ever-growing wireless communication networks through the utilization of flying objects, e.g., satellites and unmanned aerial vehicles/drones (UAVs). Interestingly, the applications of UAV-assisted networks are rapidly becoming an integral part of future communication services. This paper first overviews the key components of NTN while highlighting the significance of emerging UAV networks where for example, a group of UAVs can be used as nodes to exchange data packets and form a flying ad hoc network (FANET). In addition, both existing and emerging applications of the FANET are explored. Next, it provides key recent findings and the state-of-the-art of FANETs while examining various routing protocols based on cross-layer modeling. Moreover, a modeling perspective of FANETs is provided considering delay-tolerant networks (DTN) because of the intermittent nature of connectivity in low-density FANETs, where each node (or UAV) can perform store-carry-and-forward (SCF) operations. Indeed, we provide a case study of a UAV network as a DTN, referred to as DTN-assisted FANET. Furthermore, applications of machine learning (ML) in FANET are discussed. This paper ultimately foresees future research paths and problems for allowing FANET in forthcoming wireless communication networks.
8 September 2020 in IEEE Transactions on Vehicular Technology
Ambient backscatter communication (AmBC) over orthogonal-frequency-division-multiplexing (OFDM) signals has recently been proposed as an appealing technique for low power Internet-of-Things (IoT) applications. The special spectrum structure of OFDM signals provides a range of flexibility in terms of bit-error-rate (BER) performance, data rate, and power consumption. In this paper, we study subcarrier-wise backscatter communication over ambient OFDM signals. This new AmBC is to exploit the special spectrum structure of OFDM to transmit data over its squeezed orthogonal subcarriers. We propose a basis transmission scheme and its two modifications to support a higher data rate with superior BER performance compared to existing methods. The basis scheme can transmit one bit per subcarrier using on-off keying (OOK) modulation in the frequency domain. In the first modification, interleaved subcarrier block transmission model is employed to improve the BER performance of the system in frequency-selective channels. It results in a trade-off between the size of the blocks and data rate. Thus, in the second modification, interleaved index modulation (IM) is employed to mitigate the data rate decrementation of the former modification. It also stabilizes and controls the power of the signal to result in interference reduction for a legacy receiver. Analytical and numerical evaluations provide a proof to see the performance of the proposed method in terms of BER, data rate, and interference.