Shuo ZHANG

Dr. Shuo ZHANG


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2024 in Energies
Verified
Journal Article
Open access
PDF file
SZShuo ZHANG
Shuo ZHANG
AMAotian Ma
Aotian Ma
TZTeng Zhang
Teng Zhang
NGNing Ge
Ning Ge
XHXing Huang
Xing Huang
To accurately predict the matching relationships between the various components and the engine performance in the whole aero-engine environment, this study introduces a two-dimensional throughflow simulation method for the whole aero-engine. This method is based on individual throughflow solvers for the turbo-machinery and the combustor. It establishes a throughflow simulation model for the whole engine by integrating with the compressor-turbine co-operating equations and boundary conditions. The turbo-machinery throughflow solver employs a circumferentially averaged form of the time-dependent Navier–Stokes equations (N-S) as the governing equation. The combustor solver uses the Reynolds Average Navier–Stokes (RANS) method to solve flow and chemical reaction processes by constructing turbulence, combustion, and radiation models. The accuracy of the component solver is validated using Pratt and Whitney’s three-stage axial compressor (P&W3S1) and General Electric’s high-pressure turbine (GE-EEE HPT), and the predicted results are consistent with the experimental data. Finally, the developed throughflow method is applied to simulate the throttling characteristics of the WZ-X turboshaft engine. The results predicted by the throughflow program are consistent with the GasTurb calculations, including the trends of shaft power delivered, specific fuel consumption (SFC), inlet airflow, and total pressure ratio of the compressor. The developed method to perform throughflow simulation of the whole aero-engine eliminates the dependence on a general component map. It can quickly obtain the meridian flow field parameters and overall engine characteristics, which is expected to guide the design and modification of the engine in the future.

3 January 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
SZShuo ZHANG
Shuo ZHANG
MAMa Aotian
Ma Aotian
TZTeng Zhang
Teng Zhang
NGNing Ge
Ning Ge
XHXing Huang
Xing Huang
To accurately predict the matching relationships between the various components and the engine performance in the whole aero-engine environment, this study introduces a two-dimensional throughflow simulation method for the whole aero-engine. This method is based on individual throughflow solvers for the turbo-machinery and the combustor. It establishes a throughflow simulation model for the whole engine by integrating with the compressor-turbine co-operating equations and boundary conditions. The turbo-machinery throughflow solver employs a circumferentially averaged form of the time-dependent Navier-Stokes equations (N-S) as the governing equation. The combustor solver uses the Reynolds Average Navier-Stokes (RANS) method to solve flow and chemical reaction processes by constructing turbulence, combustion, and radiation models. The accuracy of the component solver is validated using Pratt & Whitney’s three-stage axial compressor (P&W3S1) and General Electric’s high-pressure turbine (GE-EEE HPT), and the predicted results are consistent with the experimental data. Finally, the developed throughflow method is applied to simulate the throttling characteristics of the WZ-X turboshaft engine. The results predicted by the throughflow program are consistent with the GasTurb calculations, including the trends of shaft power delivered, specific fuel consumption (SFC), inlet airflow, and total pressure ratio of the compressor. The developed method to perform throughflow simulation of the whole aero-engine eliminates the dependence on a general component map. It can quickly obtain the meridian flow field parameters and overall engine characteristics, which is expected to guide the design and modification of the engine in the future.

4 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SZShuo ZHANG
Shuo ZHANG
DZDongdong Zhong
Dongdong Zhong
HWHao Wang
Hao Wang
XWXingshuang Wu
Xingshuang Wu
NGNing Ge
Ning Ge
To achieve high-fidelity large eddy simulation (LES) predictions of complex flows while keeping computational costs manageable, this study integrates a high-order WENO-ZQ scheme into the LES framework. The WENO-ZQ scheme has been extensively studied for its accuracy, robustness, and computational cost in inviscid flow applications. This study extended the WENO-ZQ scheme to viscous flows by integrating it into a three-dimensional structured grid LES CFD solver. High-fidelity simulations of turbulent boundary layer flow and supersonic compression ramp flows were conducted, with the scheme being applied for the first time to study laminar boundary layer transition and separation flows in the high-load, low-pressure turbine PakB cascade. Classic numerical case validations for viscous conditions demonstrate that the WENO-ZQ scheme, compared to the same-order WENO-JS scheme, exhibits lower dispersion and dissipation errors, faster convergence, and better high-frequency wave resolution. It maintains high-resolution accuracy with fewer grid points. In application cases, the WENO-ZQ scheme accurately captures the three-dimensional flow characteristics of shockwave–boundary layer interactions in supersonic compression ramps and shows high accuracy and resolution in predicting separation and separation-induced transition in low-pressure turbines.

22 June 2022 in Energies
Verified
Journal Article
Open access
PDF file
SZShuo ZHANG
Shuo ZHANG
WXwenqian xu
wenqian xu
SYShuhua Yang
Shuhua Yang
FLFuan Lu
Fuan Lu
HDHua-Shu Dou
Hua-Shu Dou
The performance of a vane diffuser plays an important role in transforming the high kinetic energy into pressure energy at the impeller outlet of a centrifugal compressor. In this study, the performance enhancement of a centrifugal compressor is achieved by designing a tandem cascade diffuser. An optimum value of the total bending angle of a tandem cascade diffuser is obtained through numerical simulation. The total bending angle is defined as the angle between the tangent line of the front blade arc line at the leading edge point and the tangent line of the rear blade arc line at the trailing edge point. The range of the total bending angle increases from zero to 21°. The simulation results show that the variation of the total bending angle has a great impact on the performances of the compressor stage. The best performance is achieved by the 10° model, by which the minimum total pressure loss coefficient and the maximum static pressure recovery coefficient are obtained. The mechanism of performance improvement by choosing a reasonable total bending angle is that the separated flow zone in the diffuser is constrained and the distribution of radial velocity at the inlet and outlet of the diffuser is more uniformed. With the 10° model, the separated zone almost completely disappears in the diffuser and a distribution of more uniform radial velocity along the meridional section is obtained. Compared with the stage of the prototype with a single row of vane diffuser, the stage with the newly designed tandem vane diffuser (10° model) achieved performance improvement, the efficiency increased about 6%, and the total pressure ratio increased about 3.5% at the flow coefficient of 0.15.

11 June 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HWHao Wang
Hao Wang
DZDongdong Zhong
Dongdong Zhong
SZShuo ZHANG
Shuo ZHANG
XWXingshuang Wu
Xingshuang Wu
NGNing Ge
Ning Ge
In numerical simulations, achieving high accuracy without significantly increasing computational cost is often a challenge. To address this issue, this paper proposes an improved finite volume Weighted Essentially Non-Oscillatory (WENO) scheme for structured grids. By employing a single-point quadrature rule to perform flux integration on the control volume faces, this scheme is designed for use in NUAA-Turbo three-dimensional fluid solvers based on structured grids, utilizing RANS and RANS/LES coupling to simulate turbomachinery flows. Firstly, the new WENO scheme is validated against classical numerical test cases to evaluate its stability and reliability in handling discontinuities, double Mach reflection problems, and Rayleigh–Taylor (RT) instability. Compared to the original scheme, this improved finite-volume WENO scheme demonstrates better stability near discontinuities and more effectively resolves flow features at the same grid resolution. Next, for engineering applications related to turbomachinery, such as compressor and turbine characteristics, calculations using RANS are performed and the results obtained with WENO-ZQ3 and WENO-JS3 are compared. Finally, the new fifth-order WENO scheme is applied to RANS/LES coupling simulations of turbine wake and film cooling. The results indicate that the improved finite-volume WENO scheme provides better stability and accuracy in engineering applications. For instance, the average error in calculating compressor efficiency characteristics is reduced from 0.76% to 0.05%, the error in turbine vane pressure distribution compared to the experimental values is within 1%, and the error in film cooling efficiency centerline distribution compared to the experimental values is within 3%. Additionally, the qualitative results of turbine wake and film cooling show that even with a small number of grid points, more detailed flow physics can be captured, thereby reducing computational costs in aerodynamic applications.

1 May 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
HWHao Wang
Hao Wang
DZDongdong Zhong
Dongdong Zhong
SZShuo ZHANG
Shuo ZHANG
XWXingshuang Wu
Xingshuang Wu
NGNing Ge
Ning Ge
In numerical simulations, achieving high accuracy without significantly increasing computational costs is often challenging. To address this, this paper presents an improved finite volume weighted essentially non-oscillatory (WENO) scheme tailored for applicability in computational fluid dynamics (CFD) and implemented in the flow solver NUAA-Turbo for simulating turbomachinery flows using both RANS and RANS/LES coupling. Firstly, the new WENO scheme is validated against classic numerical test cases to assess its stability and reliability in handling discontinuities, the Double problem, and Raleigh-Taylor (RT) instability issues. Compared to the original format, this enhanced finite volume WENO scheme demonstrates superior stability near discontinuities and resolves flow features with the same grid resolution more effectively. Next, for engineering applications related to turbomachinery, such as compressor and turbine characteristics, computations are performed using RANS, and the results obtained using WENO-ZQ3 and WENO-JS3 are compared. Finally, the new fifth-order WENO scheme is applied to RANS/LES coupled simulations of turbine wakes and film cooling. The results show that the enhanced finite volume WENO scheme offers improved stability and accuracy in engineering applications, allowing for high-precision calculations with fewer grid points to capture more detailed flow physics, thereby reducing computational costs in aerodynamic applications.