α-Aminophosphonates, -phosphinates, and -phosphine oxides are a group of organophosphorus compounds that were investigated as extraction agents for rare earth (RE) metals and actinoids for the first time in the 1960s. However, more systematic investigations of their extraction properties towards REs and actinoids were not started until the 2010s. Indeed, recent studies have shown that these α-amino-functionalized compounds can outperform the commercial organophosphorus extraction agents in RE separations. They have also proven to be very efficient extraction and precipitation agents for recovering Th and U from RE concentrates. These actinoids coexist with REs in some of the commercially important RE-containing minerals. The efficient separation and purification of REs is becoming more and more important every year as these elements have a pivotal role in many existing technologies. If one also considers the facile synthesis of α-amino-functionalized organophosphorus extractants and precipitation agents, it is expected that they will be increasingly utilized in the extraction chemistry of REs and actinoids in the future. This review collates α-aminophosphonates, -phosphinates, and -phosphine oxides that have been utilized in the separation chemistry of REs and actinoids, including their most relevant synthetic routes and molecular properties. Their extraction and precipitation properties towards REs and actinoids are also discussed.
28 June 2024 in Separation and Purification Technology
The combination of 3D-printed filter technology and methanesulfonic acid enables efficient recovery of rare earths from NdFeB magnets, yielding a 99.4 ± 0.4% pure rare-earth fraction and four fractions of remaining elements.
3D printed filters containing 70 wt% of polyamide (PA) nylon-12 as a polymer matrix and either 30 wt% of a commercial aminophosphonic acid functionalised resin (Lewatit TP260) or a synthetized aminobisphosphonic acid (1) as an additive were investigated for the separation of elements from a NdFeB magnet waste. Before separation studies, the magnet was leached with 10 v/v% methanesulfonic acid using S/L ratio of 5 g/l for 20 h at 60 °C. The PA-TP260 filters adsorbed rare earth elements (REE) more efficiently than transition and main group elements and showed greater uptake than the PA-1 filters at the studied pH range of 0.15–4.00. Thus, the PA-TP260 filters were selected for the separation process, wherein Fe was selectively precipitated from the leachate, while solid-phase extraction was used to separate the remaining elements from the leachate to four distinct fractions: REEs; B, Co; Cu; and Al. Neither significant decrease in the adsorption and desorption percentages of the PA-TP260 filters over 50 adsorption-desorption cycles, nor structural changes, as confirmed by the detailed X-ray tomography studies, were observed. The results indicate that the PA-TP260 filters are robust and fully reusable. Overall, the results demonstrated that the highly porous 3D printed filters efficiently separate critical elements from the NdFeB magnet leachate only by using ecofriendly MSA, ammonium chloride, and potassium oxalate solutions paving the way towards greener separation processess for the critical elements.