A method for generating terahertz (THz) necklace beams from two-color vortex-laser-induced air plasma is proposed and theoretically investigated based on the frequency down-conversion process. The numerical demonstrations based on both the four-wave mixing and the photocurrent schemes confirm that the generated THz pulse is a shear necklace beam without orbital angular momentum (OAM), whose phase is manifested as the stepwise jump versus azimuthal angle. The origin of OAM vanishing is attributed to the fact that the phase difference between two-color field components does not contribute to the phase but only to the amplitude of the THz pulse.
A novel all-optical control scheme is proposed to continuously tune the THz radiation polarization, where the driving laser is based on a three-pulse configuration with adjustable time delays or intensity ratio. With this scheme, not only is the circularly polarized THz radiation realized, the continuous tuning from circular polarization to linear polarization can also be obtained conveniently just by adjusting time delays or intensity ratio. Moreover, the left or the right chirality of THz radiation can be transformed between each other with suitable time delays.
We present experimentally an obvious enhancement of the terahertz (THz) radiation with two paralleled filaments pumped by two-color laser fields for a full use of a high laser power, compared with single filament. By mapping the 3-dimensional electric trajectories of generated THz fields with a (111) ZnTe crystal, we observe that the total THz polarization from two filaments can be manipulated by varying the time delay between the two orthogonally polarized pumps, which agrees well with the simulations under the photocurrent model. Notably, the power and spectrum of the THz field almost keep unchanged while manipulating the ellipticity of the THz polarization, which is important for a polarization-controllable THz source.
We theoretically and numerically investigate the generation and evolution of different pulsed terahertz (THz) singular beams with an ultrabroad bandwidth (0.1–40 THz) in long gas-plasma filaments induced by a shaped two-color laser field, i.e., a vortex fundamental pulse (ω0) and a Gaussian second harmonic pulse (2ω0). Based on the unidirectional propagation model under group-velocity moving reference frame, the simulating results demonstrate that three different THz singular beams, including the THz necklace beams with a π-stepwise phase profile, the THz angular accelerating vortex beams (AAVBs) with nonlinear phase profile, and the THz vortex beams with linear phase profile, are generated. The THz necklace beams are generated first at millimeter-scale length. Then, with the increase of the filament length, THz AAVBs and THz vortex beams appear in turn almost periodically. Our calculations confirm that all these different THz singular beams result from the coherent superposition of the two collinear THz vortex beams with variable relative amplitudes and conjugated topological charges (TCs), i.e., +2 and −2. These two THz vortex beams could come from the two four-wave mixing (FWM) processes, respectively, i.e., ω0+ω0−2ω0→ωTHz and –(ω0+ω0) + 2ω0→ωTHz. The evolution of the different THz singular beams depends on the combined effect of the pump ω0−2ω0 time delay and the separate, periodical, and helical plasma channels. And the TC sign of the generated THz singular beams can be easily controlled by changing the sign of the ω0−2ω0 time delay. We believe that these results will deepen the understanding of the THz singular beam generation mechanism and orbital angular momentum (OAM) conversion in laser induced gas-filamentation.
This paper investigates the generation of the ultra-broadwidth (0.1–30 THz) terahertz (THz) radiation carrying fractional/integer orbital angular momentums (OAMs) via the interaction of the two-color (ω0 and 2ω0) laser field carrying initial fractional topological charges (TCs) with air in a moderate pump intensity regime (20 TW cm−2 < Ipump < 50 TW cm−2). The two four-wave mixing (FWM) processes (i.e., ω0 + ω′0 − 2ω0 → ωTHz and 2ω0 − ω0 − ω′0 → ωTHz) are responsible for THz generation. The two processes can produce two THz pulses. They interfere with each other and THz interference vortex beams are obtained. More importantly, the generation probability from the first FWM process grows while that of the second process declines in the positive frequency region over distance. This is largely due to the combined action of phase mismatch and the blue shift of the THz center frequency. For a longer distance, THz fractional vortex beams (FVBs)/integer vortex beams (IVBs) are produced by the dominant FWM process (ω0 + ω′0 − 2ω0 → ωTHz). Therefore, via employing different combinations of the initial TCs of the ω0 and 2ω0 pulses, one can manipulate the generation of the THz vortex beams with arbitrary fractional-order or integer-order TCs at some specific propagation distances. What is even more interesting is that, when employing half-integer TCs, THz FVBs with varying TC over distance can be produced, companied with birth and annihilation of the alternative vortex pair. This is principally due to diffraction-related effects and the unstable nature of the fractional vortex structures. This simple manipulation for THz waves carrying arbitrary fractional or integer TCs in this scheme encourages the applications for optically rotation, manipulation of molecular or cell assays and image edge enhancement in the field of biomedicine.
Spatiotemporal optical vortex (STOV) pulses, possessing inherent transverse orbital angular momentum (OAM) and exhibiting phase singularity and intensity null in the spatiotemporal (ST) domain, have received increasing attention in recent years. Here, we investigate theoretically the third harmonic generation and evolution properties of STOV pulses via the interaction of 800-nm-STOV pulses with air-plasma filaments. We show that beautiful third harmonic STOV pulses are generated at a propagation distance of several millimeters. During further propagation, the ST intensity profiles of the third harmonics undergo variations in a periodic way, leading to the distortion and subsequent restoration to the initial ring pattern. The periodic evolution is a result of the interference effects between the third harmonics generated with different phases. Consequently, the evolution period is roughly twice the dephasing length of the third harmonics. Meanwhile, additional singularities emerge in the intensity patterns due to destructive interference occurring at specific dephasing lengths for the specific frequency components. The high-frequency components experience destructive interference earlier than the low-frequency components during each evolution period because the dephasing length decreases with frequency. This results in the sequentially appearance of the additional singularities from top to bottom in the ST intensity patterns. The proposed scheme demonstrates a way for higher-order STOV generation and manipulation in air-plasma filaments, which can be of interest for experiments related to vortex light science.