Human biomonitoring (HBM) is an important tool to survey the internal exposure of humans which represents the real life chemical body burden to chemicals and/or their metabolites. It results from total exposure to chemical substances from different sources and via different routes. These substances may be regulated under different legislative frameworks on chemicals (e.g., environmental, occupational, food safety etc). In occupational health, HBM has long traditions to control the exposures at workplaces. By providing accurate data on internal exposure, HBM data can improve human health risk assessment (RA) for both the general population and workers. Although the past few years have shown good examples on the use of HBM in the RA of chemicals, there is still quite some work to be done to improve its use in a regulatory RA. Under the scope of the European Human Biomonitoring Initiative (project HBM4EU, 2017-2021), the current study reviews the state-of-the-art of HBM use in chemicals RA with a special focus in Europe, and attempts to identify hurdles and challenges faced by regulators. To gather information on the use of HBM, including the availability of guidance on how to use it in RA, the RA schemes applied by different European or international organizations were analysed. Examples of such use were identified for a few selected groups of chemicals of concern for human health. In addition, we present the results of a survey, aimed at collecting information from national regulatory risk assessors on their day-to-day RA practices, the use of HBM data, and the obstacles and challenges related to their use. The results evidenced and explained some of the current obstacles of using HBM data in RA. These included the lack of HBM guidance values or biomonitoring equivalents (BEs), limited toxicokinetic information to support the interpretation of HBM data and, in the occupational health and safety (OSH) field, the lack of legal enforcement. Therefore, to support the integration of HBM in regulatory RA, we recommend, on one hand, the elaboration of a EU level guidance on the use of HBM in RA and, on the other hand, the continuation of research efforts to integrate HBM with new RA approaches using in vitro/in silico data and Adverse Outcome Pathways (AOPs).

Recent advances in analytical chemistry have allowed a greater possibility of using quantitative approaches for measuring human exposure to chemicals. One of these approaches is biomonitoring (BM), which provides unequivocal evidence that both exposure and uptake of a chemical have taken place. BM has been a longstanding practice in occupational health for several reasons. BM integrates exposure from all routes. It can help identify unintentional and unexpected exposures and assess the effectiveness of existing risk-management measures. BM also provides relevant information to support policy development by delivering better evidence of workers’ exposure to chemical substances, even within the framework of the present regulations. Thus, BM can allow for both the evaluation of the impact of regulation and identification of further needs for new or improved regulation. However, despite all these well-recognized advantages, BM is currently an underused exposure assessment tool. This paper provides an overview of the key aspects to be considered when using BM in the context of occupational health interventions. Additionally, this paper describes the potential of BM as an exposure assessment tool, distinguishing the role of BM in exposure assessment and health surveillance and clarifies ethical and communication aspects to guarantee that general data protection regulations are followed. In addition, actions and research needs are identified (particularly with reference to the European situation), which aim to encourage the increased use of BM as an exposure assessment tool.

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals.

Human health risk assessment is historically built upon animal testing, often following Organisation for Economic Co-operation and Development (OECD) test guidelines and exposure assessments. Using combinations of human relevant in vitro models, chemical analysis and computational (in silico) approaches bring advantages compared to animal studies. These include a greater focus on the human species and on molecular mechanisms and kinetics, identification of Adverse Outcome Pathways and downstream Key Events as well as the possibility of addressing susceptible populations and additional endpoints. Much of the advancement and progress made in the Next Generation Risk Assessment (NGRA) have been primarily focused on new approach methodologies (NAMs) and physiologically based kinetic (PBK) modelling without incorporating human biomonitoring (HBM). The integration of toxicokinetics (TK) and PBK modelling is an essential component of NGRA. PBK models are essential for describing in quantitative terms the TK processes with a focus on the effective dose at the expected target site. Furthermore, the need for PBK models is amplified by the increasing scientific and regulatory interest in aggregate and cumulative exposure as well as interactions of chemicals in mixtures. Since incorporating HBM data strengthens approaches and reduces uncertainties in risk assessment, here we elaborate on the integrated use of TK, PBK modelling and HBM in chemical risk assessment highlighting opportunities as well as challenges and limitations. Examples are provided where HBM and TK/PBK modelling can be used in both exposure assessment and hazard characterization shifting from external exposure and animal dose/response assays to animal-free, internal exposure-based NGRA.

The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. Within its remit, the project is gathering new, policy relevant, EU-wide data on occupational exposure to relevant priority chemicals and developing new approaches for occupational biomonitoring. In this manuscript, the hexavalent chromium [Cr(VI)] study design is presented as the first example of this HBM4EU approach. This study involves eight European countries and plans to recruit 400 workers performing Cr(VI) surface treatment e.g. electroplating or stainless steel welding activities. The aim is to collect new data on current occupational exposure to Cr(VI) in Europe and to test new methods for Cr biomonitoring, specifically the analysis of Cr(VI) in exhaled breath condensate (EBC) and Cr in red blood cells (RBC) in addition to traditional urinary total Cr analyses. Furthermore, exposure data will be complemented with early biological effects data, including genetic and epigenetic effects. Personal air samples and wipe samples are collected in parallel to help informing the biomonitoring results. We present standard operational procedures (SOPs) to support the harmonized methodologies for the collection of occupational hygiene and HBM samples in different countries.

Asthma is one of the most common chronic diseases worldwide affecting all age groups from children to the elderly. In addition to other factors such as smoking, air pollution and atopy, some environmental chemicals are shown or suspected to increase the risk of asthma, exacerbate asthma symptoms and cause other respiratory symptoms. In this scoping review, we report environmental chemicals, prioritized for investigation in the European Human Biomonitoring Initiative (HBM4EU), which are associated or possibly associated with asthma. The substance groups considered to cause asthma through specific sensitization include: diisocyanates, hexavalent chromium Cr(VI) and possibly p-phenylenediamine (p-PDA). In epidemiological studies, polyaromatic hydrocarbons (PAHs) and organophosphate insecticides are associated with asthma, and phthalates, per- and polyfluoroalkyl substances (PFASs), pyrethroid insecticides, mercury, cadmium, arsenic and lead are only potentially associated with asthma. As a conclusion, exposure to PAHs and some pesticides are associated with increased risk of asthma. Diisocyanates and Cr(VI) cause asthma with specific sensitization. For many environmental chemicals, current studies have provided contradicting results in relation to increased risk of asthma. Therefore, more research about exposure to environmental chemicals and risk of asthma is needed.