Christian Hofmann

Mr. Christian Hofmann

System Packaging, Fraunhofer Institute for Electronic Nano Systems, Chemnitz, Saxony, Germany
orcid
M(O)EMS & Power Electronics Packaging, 3D System Integration...

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2019
Verified
Conference Paper
Closed access
Christian HofmannChristian Hofmann
Christian Hofmann
AFAlexander Frohlich
Alexander Frohlich
JKJonas Kimme
Jonas Kimme
MWMaik Wiemer
Maik Wiemer
TOThomas Otto
Thomas Otto
Innovative packaging techniques are essential for the development of new microsystems. To integrate different materials into one package, the thermal stress on the devices has to be minimized. This paper presents a method for selective and energy-efficient induction heating of Cu-Sn layers to support and enhance the bonding process at wafer-level. Technological challenges include the inductor design for homogeneous heating, the use of high-frequency electromagnetic fields up to frequencies of f = 2.0 MHz, and the integration of the induction equipment into an industrial wafer bonder. Infrared thermography imaging was used to characterize the selective heat generation with very fast heating rates of ΔT > 150 K/s. Consequently, the wafer bonding process could be performed in t bond = 120.0 s by applying a low pressure of p = 2.2 MPa.

14 June 2023 in IEEE Transactions on Magnetics
Verified
Journal Article
Open access
Christian HofmannChristian Hofmann
Christian Hofmann
MKMartin Kroll
Martin Kroll
SPSushant Panhale
Sushant Panhale
MWMaik Wiemer
Maik Wiemer
AKAndreas Kunke
Andreas Kunke
HKHarald Kuhn
Harald Kuhn
This paper presents a technique for selective and energy-efficient induction heating of aluminum (Al) frames to support and enhance the thermocompression bonding (TCB) for electronics packaging in the field of heterogeneous integration. The technological challenges include the use of an adapted induction coil for homogeneous heat distribution, the implementation of ISM (industrial, scientific, medical) radio band frequencies in the high frequency (HF) and very high frequency (VHF) range up to f 0 = 40.68 MHz, and the assembly of a heating system based on an RF generator and automatic matching unit for impedance modulation. Finite element analysis (FEA) was used to calculate the electromagnetic (EM) fields based on the coil design used. The inductive heating was successfully carried out using a generator power of P = 100 W with coil currents in the range of I 0 = 10.1 to 11.3 A (amplitudes). With this setup, a peak temperature of T f_max = 633 °C in the Al frames could be achieved after th = 10 s. This corresponds to an average heating rate of dT/dt = 63.3 K/s.

12 August 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Christian HofmannChristian Hofmann
Christian Hofmann
MSMaulik Satwara
Maulik Satwara
MKMartin Kroll
Martin Kroll
SPSushant Panhale
Sushant Panhale
PRPatrick Rochala
Patrick Rochala
HKHarald Kuhn
Harald Kuhn
Considering the demand for low temperature bonding in 3D integration and packaging of microelectronic or micromechanical components, this paper presents the development and application of an innovative inductive heating system using micro coils for rapid Cu-Sn solid-liquid interdiffusion (SLID) bonding at chip-level. The design and optimization of the micro coil as well as the analysis of the heating process were carried out by means of finite element method (FEM). The micro coil is a composite material of an aluminum nitride (AlN) carrier substrate and embedded metallic coil conductors. The conductive coil geometry is generated by electroplating of 500 µm thick copper into the AlN carrier. By using the aforementioned micro coil for inductive Cu-Sn SLID bonding, a complete transformation into the thermodynamic stable ε-phase Cu3Sn with an average shear strength of 45.1 N/mm2 could be achieved in 130 s by applying a bond pressure of 3 MPa. In comparison to conventional bonding methods using conduction-based global heating, the presented inductive bonding approach is characterized by combining very high heating rates of about 180 K/s as well as localized heating and efficient cooling of the bond structures. In future, the technology will open new opportunities in the field of wafer-level bonding.

10 November 2021
Verified
Conference Paper
Closed access
Christian HofmannChristian Hofmann
Christian Hofmann
MBMario Baum
Mario Baum
MSMaulik Satwara
Maulik Satwara
MKMartin Kroll
Martin Kroll
SPSushant Panhale
Sushant Panhale
HKHarald Kuhn
Harald Kuhn
This paper presents a method for rapid and homogeneous induction heating of micro-scaled silver particle layers to support and enhance the bonding process of microelectronic components at the chip level.

1 December 2014
Verified
Conference Paper
Closed access
SZSeverin Zimmermann
Severin Zimmermann
TBThomas Brunschwiler
Thomas Brunschwiler
BBBrian R. Burg
Brian R. Burg
JZJonas Zuercher
Jonas Zuercher
GHGuo Hong
Guo Hong
Christian HofmannChristian Hofmann
Christian Hofmann
Heat dissipation in 3D chip stacks suffers from multiple thermal interfaces. The effective thermal resistance of the bond-line between individual dies, with the electrical interconnects can be minimized by the introduction of thermal conductive underfills. Up to now, only sequentially formed underfills result in true percolation and hence, thermal conductivities of more than 1 W/m-K. In this study, we report on various aspects to consider during the formation of percolating thermal underfills, by centrifugal filling of micron-sized particles and the subsequent backfilling of an epoxy by capillary action. Particle assemblies within silicon-glass cavities were investigated for mono and poly-dispersed spherical and facetted particles with characteristic dimension in the range of 15 μm to 50 μm. Clogging of particles between silicon pillars could be mitigated at low particle fluxes dispensed by the hour glass principle. Particle shadowing behind the silicon pillars could be eliminated by ultrasonic agitation. Finally, close to crystalline phases could be identified for the mono-dispersed particles, compared to a random packing for the poly-dispersed particles. The effective pore diameter of the particle beds was experimentally derived from a backfilling experiment with viscosity standards. A normalized pore diameter of 0.15, 0.17 to 0.20 and 0.11 was observed for mono and poly-dispersed spherical and facetted particles, respectively. The backfill dynamics can be predicted with those values and the Washburn equation. Cavities filled with particles down to 30 μm diameter could be filled completely with the available low viscosity epoxy system. Finally, we report on the re-arrangement of filler particles due to capillary action and viscous drag, during the backfilling process. Defects are minimal for fluids of low surface tension and high viscosity. Hence, only 1 area-% of defects were observed from the infiltration of epoxies.

27 July 2023 in Electronics
Verified
Journal Article
Open access
PDF file
PRPatrick Rochala
Patrick Rochala
Christian HofmannChristian Hofmann
Christian Hofmann
MKMartin Kroll
Martin Kroll
SPSushant Panhale
Sushant Panhale
RJRezan Javed
Rezan Javed
KHKarla Hiller
Karla Hiller
In this article, an efficient die-bonding technology based on silver sintering due to induction heating is presented. By using this technology, the heat for the sintering reaction is locally limited to the bonding area and heating of the entire power module is avoided. Furthermore, the sintering reaction is promoted due to current flow between the silver particles, and the sintering time is drastically reduced. Next to the experimental trials presented in this paper, finite element (FE) simulation methods were applied to develop a suitable induction coil geometry for the bonding of a diode to a direct bonded copper (DBC) substrate. Additional heating and sintering tests verified the reliability of the simulation model as well as the technological approach. Diodes were successfully bonded during the experiments and were analyzed by means of scanning electron microscopy (SEM) and function tests to qualify the inductive bonding technology. The results presented in this paper demonstrate that induction heating has high potential for cost-effective production in the field of die attach and can drastically increase the output in power-electronics production.