Lignin is a fascinating aromatic biopolymer with high valorization potentiality. Besides its extensive value in the biorefinery context, as a renewable source of aromatics lignin is currently under evaluation for its huge potential in biomedical applications. Besides the specific antioxidant and antimicrobial activities of lignin, that depend on its source and isolation procedure, remarkable progress has been made, over the last five years, in the isolation, functionalization and modification of lignin and lignin-derived compounds to use as carriers for biologically active substances. The aim of this review is to summarize the current state of the art in the field of lignin-based carrier systems, highlighting the most important results. Furthermore, the possibilities and constraints related to the physico–chemical properties of the lignin source will be reviewed herein as well as the modifications and processing required to make lignin suitable for the loading and release of active compounds.

Residual biomass from agri-food production chain and forestry are available in huge amounts for further valorisation processes. Delignification is usually the crucial step in the production of biofuels by fermentation as well as in the conversion of cellulose into high added-value compounds. High-intensity ultrasound (US) and hydrodynamic cavitation (HC) have been widely exploited as effective pretreatment techniques for biomass conversion and in particular for cellulose recovery. Due to their peculiar mechanisms, cavitational treatments promote an effective lignocellulosic matrix dismantling with delignification at low temperature (35–50 °C). Cavitation also promotes cellulose decrystallization due to a partial depolymerization. The aim of this review is to highlight recent advances in US and HC-assisted delignification and further cellulose recovery and valorisation.

In this study, a novel hydrodynamic cavitation unit combined with a glow plasma discharge system (HC-GPD) was proposed for the degradation of pharmaceutical compounds in drinking water. Metronidazole (MNZ), a commonly used broad-spectrum antibiotic, was selected to demonstrate the potential of the proposed system. Cavitation bubbles generated by hydrodynamic cavitation (HC) can provide a pathway for charge conduction during glow plasma discharge (GPD). The synergistic effect between HC and GPD promotes the production of hydroxyl radicals, emission of UV light, and shock waves for MNZ degradation. Sonochemical dosimetry provided information on the enhanced formation of hydroxyl radicals during glow plasma discharge compared to hydrodynamic cavitation alone. Experimental results showed a MNZ degradation of 14% in 15 min for the HC alone (solution initially containing 300 × 10^-6 mol L^-1 MNZ). In experiments with the HC-GPD system, MNZ degradation of 90% in 15 min was detected. No significant differences were observed in MNZ degradation in acidic and alkaline solutions. MNZ degradation was also studied in the presence of inorganic anions. Experimental results showed that the system is suitable for the treatment of solutions with conductivity up to 1500 × 10^-6 S cm^-1. The results of sonochemical dosimetry showed the formation of oxidant species of 0.15 × 10^-3 mol H₂O₂ L^-1 in the HC system after 15 min. For the HC-GPD system, the concentration of oxidant species after 15 min reached 13 × 10^-3 molH₂O₂L^-1. Based on these results, the potential of combining HC and GPD systems for water treatment was demonstrated. The present work provided useful information on the synergistic effect between hydrodynamic cavitation and glow plasma discharge and their application for the degradation of antibiotics in drinking water.

The biologically-derived polymers polyhydroxyalkanoates (PHAs) are biodegradable and can be considered a valuable alternative to conventional fossil-based plastics. However, upstream and downstream processes for PHA production are characterized by high energy and chemical consumption and are not economically competitive with petroleum-based polymers. Aiming to improve both the environmental and economical sustainability of PHAs production, in this work, corn straw was used as raw material to obtain a mixture of fermentable sugars after microwave-assisted flash hydrolysis (2 min, 0.01 g/L, 50.7% yield). A mixed microbial culture enriched from dairy industry waste was used for fermentation in a shake flask, allowing us to achieve good poly(hydroxy-butyrate-co-hydroxy-valerate) yields (41.4%, after 72 h of fermentation). A scale-up in a stirred tank bioreactor (3 L) gave higher yields (76.3%, after 96 h), allowing in both cases to achieve a concentration of 0.42 g/L in the fermentation medium. The possibility of producing PHAs from agricultural waste using a mixed microbial culture from the food industry with enabling technologies could make the production of biopolymers more competitive.

Wastewater decontamination in pharmaceuticals is crucial to prevent environmental and health risks from API residues and other contaminants. Advanced oxidation processes (AOPs) combined with cavitational treatments offer effective solutions. Challenges include designing reactors on a large scale and monitoring the effectiveness and synergies of the hybrid technology. In the present work, pilot-scale treatment of a real high COD (485 g/L) pharmaceutical wastewater (PW) was investigated using hydrodynamic cavitation (HC) operated individually at 330 L/h or in combination with oxidants and electrical discharge (ED) with cold plasma (15 kV and 48 kHz). The first approach consisted of PW cavitational treatment alone of 7 L of 1:100 diluted PW at a HC-induced pressure of 60 bar and a flow rate of 330 L/h. However, this strategy did not provide satisfactory results for COD (∼15% less), and only when HC treatment was extended to more than 30 min in a recirculation mode, encouraging results were obtained (∼45% COD reduction). Consequently, a hybrid approach combining HC with ED-cold plasma was chosen to treat this high-COD PW. Aiming to establish an efficient flow-through hybrid process, after optimising all cavitation and electrical discharge parameters (45 bar HC pressure and 10 kHz ED frequency), the best COD abatement of ∼50 % was recorded with a 1 in 50 diluted PW. However, a subsequent adsorption step over activated carbon was required to achieve an almost quantitative COD reduction (95%+). Our integrated physicochemical process proved to be extremely efficient in treating high-COD industrial wastewater and resulted in a remarkable reduction of the COD value. In addition, the residual surfactants content in the PW were also drastically reduced (98%+) when a small amount of oxidants was added in the hybrid HC/ED treatment.

The increasing pollution of water bodies, due to the constant release of highly toxic and non-biodegradable organic pollutants, requires innovative solutions for environmental remediation and wastewater treatment. In this study, the effectiveness of different Advanced Oxidation Processes (AOPs) for the purification of water contaminated with Rhodamine B (RhB) dye at a concentration of 5 mg/L were investigated and compared. Using the classical ozonation strategy as a benchmark treatment, the research showed over 99% degradation of RhB within 4 min in a laboratory-scale batch setup with a capacity of 0.2 L. In contrast, a “chemical-free” process exploiting ultrasound (US) technology achieved a 72% degradation rate within 60 min. Further experiments were conducted using a pilot-scale rotor-stator hydrodynamic cavitation (HC) reactor on a 15 L solution leading to 33% of RhB removal in the presence of hydrogen peroxide (H₂O₂) at 75 mg/L. However, the use of an innovative cavitational reactor, which hybridizes HC with cold plasma, showed remarkable efficiency and achieved 97% degradation of RhB in just 5 min when treating a 5 L solution at an inlet pressure of 20 bar in a loop configuration. In addition, a degradation rate of 58% was observed in a flow-through configuration, emphasising the robustness and scalability of the HC/electrical discharge (ED) plasma technology. These results underline the potential of hybrid HC/ED plasma technology as an intensified and scalable process for the purification of water, as it offers a catalyst- and oxidant-free protocol.