Perovskite solar cells (PSCs) and modules are driving the energy revolution in the coming photovoltaic field. In the last 10 years, PSCs reached efficiency close to the silicon photovoltaic technology by adopting low-cost solution processes. Despite this, the noble metal (such as gold and silver) used in PSCs as a counter electrode made these devices costly in terms of energy, CO2 footprint, and materials. Carbon-based perovskite solar cells (C-PSCs) and modules use graphite/carbon-black-based material as the counter electrode. The formulation of low-cost carbon-based inks and pastes makes them suitable for large area coating techniques and hence a solid technology for imminent industrialization. Here, we want to present the upscaling routes of carbon-counter-electrode-based module devices in terms of materials formulation, architectures, and manufacturing processes in order to give a clear vision of the scaling route and encourage the research in this green and sustainable direction.
Sustainable energy production is one of the major goals for society to address climate change, with the aim of reducing fossil fuel consumption and greenhouse gases emissions. One of the main alternatives to burning fossil fuels is solar energy conversion; therefore, scientific research has moved towards the development of photovoltaic devices that are able to harvest solar radiation and convert it into electric energy, such as perovskite solar cells (PSCs). Several production processes for PSCs exist, differing in the deposition technique of PSCs layers as well as energy and material consumption. One of the main challenges is then to minimize the environmental impact of PSC manufacturing, which can be assessed through Life Cycle Assessment. The aim of this work is to evaluate and compare the eco-profiles of four different PSC production line at mini-module scale, namely, Spin Coating, Blade Coating, Spin Coating + Press and Blade Coating in Glovebox. Results disfavour the latter manufacturing route, showing that its burden is higher than the alternatives. Differently, the Blade Coating process results to be the one having the lowest environmental impact among the proposed solutions, whereas Spin Coating and Spin Coating + Press lines show almost the similar intermediate result.
Among the new generation photovoltaics, perovskite solar cell (PSC) technology reached top efficiencies in a few years. Currently, the main objective to further develop PSCs is related to the fabrication of stable devices with cost-effective materials and reliable fabrication processes to achieve a possible industrialization pathway. In the n-i-p device configuration, the hole transporting material (HTM) used most is the highly doped organic spiro-fluorene-based material (Spiro-OMeTAD). In addition to the high cost related to its complex synthesis, this material has different issues such as poor photo, thermal and moisture stability. Here, we test on small and large area PSCs a commercially available HTM (X55, Dyenamo) with a new core made by low-cost fluorene–xantene units. The one-pot synthesis of this compound reduces 30 times its cost with respect to Spiro-OMeTAD. The optoelectronic performances and properties are characterized through JV measurement, IPCE (incident photon to current efficiency), steady-state photoluminescence and ISOS stability test. SEM (scanning electron microscope) images reveal a uniform and pinhole free coverage of the X55 HTM surface, which reduces the charge recombination losses and improves the device performance relative to Spiro-OMeTAD from 16% to 17%. The ISOS-D-1 stability test on large area cells without any encapsulation reports an efficiency drop of about 15% after 1000 h compared to 30% for the reference case.
Perovskite technology has been advancing at unprecedented levels over the past years, with efficiencies reaching up to 26.1%. State-of-the-art results are obtained on a very small area scale (<0.1 cm 2 ), by adopting high materials wasting processes not compatible with industry and with market exploitation. Silicon is a well-established technology and one of the advantages of perovskite is its ability to pair with silicon forming a tandem device that extracts charges reducing transmission and thermalization losses. In this work, we focused on finding a strategy to fabricate 15.2 × 15.2 cm 2 perovskite modules by using blade/slot-die coating and avoiding any spin coating deposition. Furthermore, we optimized the indium tin oxide top electrode deposition by adjusting the sputtering process and buffer layer deposition; finally, we focused on light management by applying an antireflective coating. We obtained a semitransparent and a tandem silicon–perovskite module in a four-terminal (4T) configuration over 225 cm 2 (4T configuration) with 13.18% and 20.91% efficiency, respectively, passing International Summit on Organic PV Stability ISOS-L1 (under continuous light soaking in the air) test with a remarkable T 80 of 1459 h.